Outdoor heaters for summer verandas and cottages: varieties and choice

Outdoor heaters for the veranda

Almost all owners of private houses and cottages with a veranda prefer to relax in this part of the building, because birdsong and pleasant freshness are factors that stimulate the health of the body. However, our climate is not particularly pleasant with warm sunny days, not to mention cool evenings in early spring or autumn. Looking for warmth and comfort, we sincerely want to create such a comfortable place at home, but what to do in such situations? Outdoor heaters for the veranda are the ideal solution for solving such problems! By installing this simple, easy-to-maintain device, you can forget about any discomfort!

Modern manufacturers of outdoor heating systems have provided everything that is necessary for safety and comfort. The catalog of our store presents the best models of leading European and domestic brands. You can easily choose the ideal device, because gas heaters for the veranda are presented in a wide range of technical parameters and layouts. If you wish, you can buy an inexpensive model Aesto, NUGT or Neoclima, which have an attractive design and, importantly, the most reasonable price. For respectable buyers, we have an equally wide choice: models from the brands Kratki, Italkero or Siabs are a vivid example of unique performance, in which quality, optional comfort and safety have reached their apogee! Contact us! Our managers will provide any advice and help you choose infrared gas heaters for the veranda in exact accordance with your preferences and operating characteristics!

To create optimal conditions for outdoor recreation, it is necessary to increase the temperature by at least 8-10 degrees. Despite the fact that the wind is constantly blowing, outdoor heaters for the veranda easily help solve this problem, because the devices are based on the principle of heating using infrared waves. The heat generated by the device spreads over a diameter of up to 5-6 meters, almost instantly warming people and surrounding objects. The average area covered by heating with such a gas appliance is up to 20-25 square meters.

To give a full assessment of the operation of such a device, let’s give a simple example: if you have an open room with an area of ​​45-50 square meters. meters, you will need two infrared gas heaters for the veranda. If the air temperature is 3-4 degrees, the installed devices will give an increase of up to 5 - 10 degrees. It is important that the presence of wind will affect comfort, because infrared waves are evenly distributed over the entire area of ​​the veranda.

The body of the device is made of stainless steel with a wear-resistant, abrasion- and scratch-resistant coating, so corrosion and other negative factors are not a problem for such structures. To move the gas heater, special transport wheels are provided at the bottom of the metal frame. If the gas runs out, the empty cylinder is easily removed and a full one is installed on it.

Top MO-EL Lucciola 798

Rating (2021): 4.23 11 reviews from resources taken into account: All Tools, SPB heating

• Characteristics Average price: 18,800 rub.
• Country: Italy
• Dimensions: 400*132*90 mm
• Weight: 0.9 kg
• Heated area: 5–6 m²
• Heating power: 800 W

One of the distinctive features of MO-EL Lucciola 798 is its placement at any angle. Thanks to convenient adjustment, you can precisely direct the heat flow, accordingly, heating will occur faster and more efficiently. The kit already contains all the necessary fasteners, so installation will take a minimum of time. The heater can be installed on any stand with a diameter of 20–45 mm. The case is protected from moisture and dust according to the IP65 standard. The heating element is covered with a stainless steel grill. The seller promises a service life of up to 10 years. Reviews praise the silent operation and convenient installation of the product. If we talk about the disadvantages, buyers do not like the low power and high price relative to competitors.

Criteria for choosing an outdoor heater

To make the right choice, we should consider the technical characteristics and some operating features of the devices we are interested in.

Heater power

The thermal power of devices operating on bottled gas ranges from 10-15 kW. The most common option is with a maximum parameter of 13 kW. It is worth noting that even the most powerful gas unit will create a comfortable temperature around itself within a radius of 4 to 6 meters, provided that the air temperature outside is at least +10°C. At zero degrees you will only be warm next to the lantern. If the outdoor area is large, or gatherings are planned at zero temperatures, you should think about purchasing several devices.

An electric emitter is more efficient. It will warm the object even at + 5°C. But it alone will not be enough at lower temperatures and large areas. The power consumption of electrical appliances ranges from 2.0 to 3 kW.

Housing material

Preference should be given to stainless steel products. There are devices made from conventional steel grades with high-quality anti-corrosion coating (painting). They are cheaper. But in a year or two, even the best color may peel off. This will not happen with stainless steel.

To protect the structure from precipitation, manufacturers, for an additional fee, offer waterproof covers for their models.

Safe Operation

Electrical wiring and circuit breakers (circuit breakers) must be designed for the total power consumption of several electrical appliances. Any competent salesperson in an electrical goods store will provide assistance in selecting the cross-section of wires and the correct choice of machines.

Gas heaters must be equipped with gas control and tilt sensors. If the device accidentally tips over, the sensor sends a signal to the control unit and the gas supply valve closes. Some manufacturers equip their products with carbon dioxide level monitoring sensors. In an open area, this gas does not pose a danger. Such sensors are installed to obtain an international certificate as confirmation of the environmental friendliness of the device. After all, CO2 is a greenhouse gas.

In terms of safety of use, gas appliances are inferior to their electric counterparts. Therefore, for constant heating, it is better to install an infrared electric emitter in a closed room. Gas appliances provide heat by burning fuel, producing combustion products that must be removed from the room into the atmosphere. When installing any gas-consuming equipment in an enclosed space, the user is obliged to ensure sufficient ventilation. Otherwise, the owner will not receive permission to operate it.

What else to pay attention to

When choosing between floor lamps and pyramids, it is worth paying attention to the fact that, in addition to the function of heating the area, pyramids illuminate it very well.

In addition, observing the living flames in the glass flask of the pyramidal apparatus adds a feeling of comfort and peace, comparable to contemplating the flames of a fire or fireplace.

Floor lamps form a cone of thermal radiation around themselves of a larger area than pyramidal installations.

A heater can become a decoration for a summer cottage. Manufacturers pay great attention to design. Non-standard materials are often used to emphasize the individuality of their models.

It is worth paying attention to the type of fuel of gas emitters indicated in the product description. It is more correct to choose devices that run on propane and butane. There are devices that operate only on one specific type of gas. This is not a good option.

Electrical IR emitters have the best efficiency. They are efficient, small-sized, and can be wall-mounted, ceiling-mounted or floor-mounted. The latter are similar to floor lamp-type gas appliances, but without a cabinet. They need a larger platform. It is easier for wall-mounted emitters to find a place on the veranda where there is at least one wall. Ceiling devices are more suitable for gazebos.

Outside

Most often, the outer part of the veranda is insulated. This process is not at all complicated, the main thing is to decide which materials are best to deal with.

Such work should be carried out in good and warm weather. It is necessary to insulate the ceiling using mineral wool or penofol. Then you need to line the walls with polyurethane foam or other similar materials and close it with any finishing.

External insulation has a number of advantages.

• All insulation work is carried out outside, which is very good, because all the garbage remains outside and cleaning takes less time.
• Working with materials does not prevent household members from going about their business.
• The dimensions of the veranda do not decrease by a single centimeter.
• By finishing the walls with special materials, you can retain heat on the veranda for a long time. Plus, it will not get damp, which makes it possible to extend its service life.

Top TOURIST MINI AFRICA TH-808

Rating (2021): 4.61 91 reviews taken into account from resources: Yandex.Market, All Tools, iMarketThe most economical

The street gas model consumes no more than 100 g of fuel per hour - this is the best result in the rating. One bottle will last a long time.

• Characteristics Average price: 2340 rub.
• Country: South Korea
• Dimensions: 130*300*260 mm
• Weight: 1.5 kg
• Heated area: 12 m²
• Heating power: 1.2 kW
• Gas consumption: 0.1 kg/h

The South Korean model TOURIST MINI AFRICA is often called the best portable heater for a tent, but it is also perfect for a summer veranda. Despite its modest technical characteristics, the device copes well with heating a small area. It has a compact body and low weight, making it convenient to carry the device to any part of the terrace. There is a piezo element for quick ignition and a rotary power switch. The ceramic burner is protected by a durable metal grill. Fuel consumption is pleasingly economical, and on the body there are clear inscriptions for control. In a closed space there may be a smell of gas, but on the terrace this problem is eliminated.

Advantages and disadvantages

• Intuitive controls
• Great option for a hike
• Solid housing with burner protection
• Convenient carrying handle

• Sometimes you can smell gas
• Low power for large area
• Not the most reliable fixation of the cylinder

Top Ballu BIGH-55

This gas heater is the only device in the rating that is capable of heating a terrace or room of up to 60 m².

• Characteristics Average price: 12890 rub.
• Country Russia
• Dimensions: 370*398*750 mm
• Weight: 10.9 kg
• Heated area: 60 m²
• Heating power: 4.2 kW
• Gas consumption: 0.11–0.31 kg/h

Ballu BIGH-55 is a powerful gas stove for heating a large room, summer veranda or terrace. This is the best option for a home where there are frequent power outages. The device combines infrared and convective principles. The latest Fast Heat technology has increased heat transfer. The front part is made of strong ceramics, so there is no doubt about the reliability and durability of the device. Manufacturers also paid special attention to safety. There is a set of sensors to turn off when tipping over and control the size of the fire. As for the cons, users found only the lack of forced convection. Because of this, work efficiency decreases.

Advantages and disadvantages

• Sophisticated security system
• Works autonomously and on electricity
• Improved heat dissipation
• Heating of an area up to 60 square meters

• No forced convection system
• Sometimes gas consumption exceeds the stated norm

Wall insulation

The first priority is to make a frame on the walls: place wooden blocks in a horizontal position over the entire plane with an interval of 50 cm. The size of the beam depends on the number of layers of insulation and its thickness. The first beam can be laid directly under the ceiling. Then use a tape measure to measure the required space from the bottom edge of the beam (about 50 cm) and mark with a pencil the place for the next beam. On the marked lines, screw the frame elements using a screwdriver and self-tapping screws - we do this until the very end. Don't forget to use a level for all these manipulations.

As soon as the wooden frame is made, you can safely begin the insulation process itself. Insert the cut sheets of polystyrene foam into the resulting openings and glue them along the ends. Thermal insulation in rolls is nailed (or sewn) to the slats, and the excess is cut off. Keep in mind that mineral wool must be inserted tightly with a slight spacer between the frame. Make sure there are no holes or cracks.

To insulate the walls of the veranda, all that remains is to attach a vapor barrier - it will not allow dampness to penetrate into your family nest. We do this work with an overlap, with a margin of 10 cm. To attach the material, use a stapler and staples: it will be easy to attach the protective layer to the frame. And finally, seal all joints with special tape.

Types of heaters

All outdoor heaters can be considered infrared emitters, regardless of their design and type of fuel. They differ in design, spatial position and energy source.

Interesting! Infrared radiation does not heat the air, but the object in its area of ​​action, be it a wall, furniture or a person. And the air is already heated from the object. Therefore, the warmth will be felt even if there is a breeze blowing across the veranda.

Of all the possible types of energy, gas or electricity are most often used for outdoor heaters. Heat emitters, accordingly, are divided into electric and gas. Each type has its own advantages and disadvantages.

Electrical

Emitters of this type are lighter, more compact, and more powerful. Can be used in open areas and indoors. Halogen lamps, ceramic and carbon IR emitters are used as heat sources in electric emitters. Depending on their spatial position, they can be floor, wall and ceiling.

Interesting! Some floor-standing models are equipped with presence sensors. It is enough for a person to be in the range of its action and the device automatically turns on, and vice versa. Good energy savings.

Based on the price of energy, it is difficult to judge which device is more profitable. It all depends on the intensity of its use. The disadvantage of electrical devices can be considered their attachment to the electrical network and the need to use wires, cables, carriers and extension cords. In terms of mobility, they are inferior to their gas counterparts.

Gas

Thermal energy in devices of this type is generated by burning fuel, namely liquefied petroleum gas (LPG), which is a mixture of propane and butane. LPG cylinders can be of different capacities. Cylinders of 27 liters are most often used.

The devices have a significant weight, from 15 to 25 kg (without a cylinder), and a height of at least 2000 mm. Cylinder devices are more mobile and economical compared to electric ones. They can be installed anywhere in a summer cottage, and they are purchased for infrequent use.

Based on the shape of the structure, a distinction is made between floor lamp and pyramidal models.

Floor lamps

These products received their name for their external similarity to home floor lamps. The structure includes:

• cabinet;
• rack;
• burner or lamp (if it is an electrical appliance);
• reflector.

The cabinet contains a hidden compartment for a standard cylinder holding 27 liters of liquefied gas. The cabinet has a stand that ends with a burner. A reflector covers it on top. A rubber hose is passed from the burner through the stand, which is put on the fitting of the cylinder reducer and secured with a metal clamp. At the top of the stand, under the burner, there is a piezoelectric element button for igniting the torch and a gas supply regulator.

The devices are massive, from 15 to 20 kg. To easily cope with the movement of such cargo, transport rollers are fixed at the base of the cabinet. It is enough to tilt the “lantern” so that the rollers touch the floor, and roll it to any place convenient for installation.

Pyramid

They got their name from their shape. They can be triangular or quadrangular, depending on the geometry of the base. Unlike “floor lamps”, in devices of this type the gas burns in a quartz glass flask. In order to protect the user from accidentally touching the hot flask, designers enclose it with a mesh of stainless steel rods, which is very difficult to heat not only with a torch from a burner, but even with the flame of an oxy-fuel torch. The stainless steel protective grille makes the device so safe that children can fiddle around with it. Burns are simply impossible.

The piezo ignition and the power control handle are located in the cabinet, in the same place where the cylinder is installed. The weight of the “pyramid” can reach 40 kg. So the transport rollers are a completely unnecessary detail here. In addition to heating the space, these devices provide good illumination of the resting place. Advanced models are equipped with electronic control and remote control.

Important! Floor lamp and pyramid gas heaters are not intended for heating enclosed spaces. If someone still wants to buy such a thing for a garage, shed or cottage, they will have to take care of serious ventilation of the room.

Which heating to choose for a winter veranda

A small potbelly stove with a built-in fireplace.
There are several ways to effectively heat a veranda:

1. Water heating.

If the house has a boiler room with water heating, then additional pipes are installed on the terrace and connected to the central system. In this case, this is the most profitable option when the veranda is used year-round, but if you still do not periodically need heat on the terrace, then it is problematic and sometimes impossible to turn off such heating in a separate room.

1. Electric heating.

Popular articles Description and cultivation of hydrangea Strawberry Blossom

Manufacturers offer an incredible variety of different hanging and floor heaters, this includes heating elements, air heaters, radiators, oil heaters, UV and IR emitters, and a “warm floor” system.

If the winter veranda is well insulated, then one or two devices can create a comfortable temperature in the room. In addition, if necessary, you can always set them to a minimum to maintain the temperature just above 0 degrees, adjust the thermostat to turn off when certain parameters are reached, or simply disconnect them from the network.

The function of maintaining a minimum positive temperature is very convenient in cases where the owners need to leave for a while or the veranda does not need high temperature. At the same time, electricity consumption is noticeably reduced.

1. Gas generating devices.

Heating of the veranda with liquefied gas.

These are autonomous and economical devices that take up little space, operate silently and efficiently. To heat a room, you just need to stretch a gas pipe along the walls of the room. But so far not everyone can afford them; boilers are quite expensive, and installation instructions require permission and registration from special services.

1. Wood heating.

If you don’t want to bother with the additional work of laying heating pipes or are not happy with the extra electricity costs, then installing a small wood-burning stove may be the best and most profitable option. Manufacturers offer various types of heating devices, which are made in an original and even unusual style.

An excellent and harmonious option would be to install a real fireplace on the veranda: neither guests nor owners will refuse to sit by an open fire on a frosty winter evening. The warm warmth of a hot fire will add coziness and comfort to the family atmosphere.

Top Ballu BOGH-15

The high price of the product is fully justified: the manufacturer used high-quality materials and provided maximum protection.

• Characteristics Average price: 47,990 rub.
• Country Russia
• Dimensions: 609*609*2410 mm
• Weight: 40 kg
• Heated area: 25 m²
• Heating power: 13 kW
• Gas consumption: 0.97 kg/h

This outdoor heater costs several times more than its analogues from the rating. Let's try to figure out why the manufacturer requires such a sum. Live fire is located inside a borosilicate glass flask. A 4-sided reflector protects the product from precipitation. The appearance of the device did not disappoint: the durable, floor-lamp-type case looks impressive and will fit into the interior of the restaurant terrace. The heating area here is not as impressive as that of the other Ballu model, but this will be enough for a summer veranda. For safety, there is a 45° tilt shut-off function, a solenoid valve and other sensors. The disadvantages of the product are obvious: huge weight and high price. Also, not everyone is satisfied with gas consumption.

Advantages and disadvantages

• Stylish and original design
• High-quality and reliable materials
• Multi-level fire protection
• Continuously adjustable fuel supply

• Increased gas consumption
• High cost and heavy weight

See also:

• 15 Best Gas Heaters

to the beginning of the rating

home_and_garden

Home and Garden

Stylish and comfortable home

How to heat a winter veranda?

Information about this community

• Placement price
  50 tokens
• Social capital
  13 273
• Number of readers
  2 500+
• Duration
  8 hours
• Minimum bet
  50 tokens
• View all Promo offers

For the winter, glass windows are equipped with “second frames,” just polycarbonate sheets from floor to ceiling. They cut off the cold air from large panes, but we have single panes. If you have sliding double-glazed windows, then you don’t need it.

Periodic

can be combined, i.e. To maintain a small plus, start the heating from home. When used, infrared heaters are turned on and off, for example, ceiling heaters. Or only infrared heaters, there are gas and electric.

Constantly:

immediately make this room warm with centralized heating, etc. Focus only on choosing glazing so that you can remove, spread, and open as much as possible during the warm period.

Top Pathfinder Hearth

• Characteristics Average price: 5227 rub.
• Country Russia
• Dimensions: 270*180*270 mm
• Weight: 1.8 kg
• Heated area: 15 m²
• Heating power: 1.5 kW
• Gas consumption: 0.11 kg/h

Pathfinder Hearth is a domestic creation, designed specifically for heating summer verandas and garages. This model perfectly combines an average price, good performance and economical fuel consumption. The ceramic gas burner is equipped with piezo ignition and mechanical control. Interestingly, it uses modern preheating technology. Thanks to this, the gas mixture quickly reaches the desired temperature, and there is no smoke emission due to incompletely burned fuel. You can put the heater into operation immediately. The main disadvantage is that at temperatures below -10°C the cylinder freezes and cannot be used. It may also fall out of the retainer.

Advantages and disadvantages

• Compact and light weight
• Preheating system
• Economical gas consumption
• Ceramic chamber

• The cylinder falls out of the magnetic holder
• Freezing below -10°C
• Mediocre build quality

The best manufacturers

It is better to buy any home appliances from well-known manufacturers. The popularity of their models is explained by the high quality of the materials and workmanship used, innovative engineering solutions, and diverse functionality. We invite you to take a closer look at some of them:

1. Jiangsu Gardensun Furnace Co. Ltd, China. Manufactures popular models of Gardensun outdoor heaters.
2. Aesto. Inexpensive outdoor emitters made in China.
3. Jax Jogh. Australian company. Its products are popular in our market.
4. Hugett Floor, Belgium. Specializes in the production of electric IR emitters.
5. Star Progetti, Italy. Produces well-known models: Heliosa, Dolce Vita, etc.
6. Ballu Industrial Group. International group of companies. Manufacturer of high-quality household and industrial climate control equipment.
7. Master Summer. Russian manufacturer of infrared gas devices. Budget devices manufactured by him are deservedly popular in our country and abroad.
8. Enders Colsman AG. Germany. The company was founded at the end of the 19th century. Specialization – equipment for outdoor cooking.

All of the listed manufacturers offer products in different price ranges. Which brand of device is better to buy is up to you to decide. Listen to the advice and recommendations of experienced users, consultations with sellers of specialized stores. Collect as much information as possible about the model you have chosen, find out how much it costs and make the right decision.

Top Aesto A-01

The device boasts the highest power, while fuel consumption is relatively economical due to special sensors.

• Characteristics Average price: 16,800 rub.
• Country: China
• Dimensions: 813*2200 mm
• Weight: 17 kg
• Heated area: 23 m²
• Heating power: 13 kW
• Gas consumption: 0.87 kg/h

Gas heaters from Aesto regularly appear in ratings of the best models for terraces and summer verandas. They look really impressive thanks to the mushroom-shaped body of the floor lamp type and the successful combination of colors. But it is not only the design of the device that attracts the attention of buyers. The body is made of stainless steel, the heating element is highly reliable. Propane or butane can be used as fuel. Gas consumption is quite economical; there is a special sensor for monitoring. Aesto A-01 is absolutely not suitable for enclosed spaces, but this is not required. The disadvantages include the fact that the actual heating area is unlikely to exceed 5–6 m².

Advantages and disadvantages

• The fuel tank lasts a long time
• Stylish body design
• Gas control sensor for safety
• Up to 30 hours of uninterrupted operation

• Increased heating area
• The first ignition takes about 5 minutes
• Not suitable for closed terraces

Tips for choosing

The very first piece of advice when choosing any equipment is that you must answer the question of how you plan to use the purchase, where you plan to install it, under what conditions the device will operate and what result of its operation will satisfy the new owner. This rule applies equally to outdoor heaters, but some other features of their operation should also be taken into account.

A very important point is maintaining safety during operation. If we are talking about a modern fuel model, then it should almost certainly be equipped with a mechanism to block the flow of fuel if the fire goes out or the body is overturned. In addition, remote control of the unit is also considered an important element of safety - if it is overheated, it is hardly safe to approach it to turn off or reduce the heating power.

Few outdoor heaters are designed to heat a space in all directions - usually the heat must have a certain direction and not be dissipated, so the unit is almost always equipped with a reflector. It is believed that the diameter of the reflector must be at least 80 cm, otherwise there can be no question of fully collecting the thermal energy emitted by the device. The large diameter of the reflector also helps to shelter the unit from wind or rain. In addition, a removable reflector looks preferable, since it significantly simplifies the installation and dismantling of the heater.

The power of the device allows you to understand how large a space the purchase can heat. For very rough calculations, they give a figure of 4–6 square meters heated by each kilowatt of power, but such indicators are typical only for relatively weak devices with a power of up to 12 kW (heating radius is approximately 7–8 meters). With a further increase in power, gradual overheating of the near zone is observed with a relatively small effect on the periphery, but the cost of the device increases quite significantly.

Most outdoor heaters are predictably made of stainless steel, but there is also just powder-coated metal - it is easy to distinguish by its characteristic gray color without shine. On the one hand, even this design of the body is considered impervious to negative street conditions, on the other hand, any metal sooner or later is subject to the destructive effects of rust, so powder-coated devices are still advised to be used only under a canopy.

In terms of design, most outdoor heaters resemble a cap in the form of a cone, expanding downwards - in the lower part there is a fuel tank, unless we are talking about an electrical device. At the same time, modern designers have long gone beyond the banal solutions of past decades, and the consumer may well find more original designs for any location.

Popular articles How to decorate the garden: 10 beautiful perennials for the garden

Finally, it is important to understand from what source the heater should provide heat. Gas is valued for its efficiency and low expenses for owners, while electricity is much more expensive, but the result is noticeable much faster

At the same time, the gas unit is much more autonomous, because it is not connected to a pipe, but consumes fuel from a cylinder, while its electric counterpart needs an outlet. Gas devices perform best at a temperature of +5–10 degrees; with a further decrease in temperature, the functionality of the device may be impaired, and fuel consumption increases significantly. Considering that the gas is stored in a cylinder, you also need to focus on its volume - the optimal indicator, convenient for transporting not too frequent refills, is considered to be 27-30 liters, which on average is enough for a week. Some gas units operate on both butane and propane, but if the model is not universal, it is better to choose butane - in terms of heat generation it will be more profitable.

Rating of quality outdoor heaters

10 Aesto A-03

The review opens with a Chinese-made model Aesto A-03. Floor lamp option. It uses propane or butane as fuel in a standard 27-liter cylinder, the supply of which is enough for 3-4 cool evenings. Safe operation is ensured by a gas control sensor. When the device falls under the pressure of a strong wind, the tilt angle sensor is activated, cutting off the fuel supply when a critical roll of 45° is reached. The burner is located at the top point of the “floor lamp” under the reflector, at a height of more than 2.0 m.

The control panel under the burner has a gas supply regulator and a piezoelectric element button for igniting the torch. Infrared radiation maintains a comfortable temperature within a radius of 4-5 meters. The device is not intended for heating enclosed spaces. Works great on verandas, gazebos and other open areas. The average cost of the device is 9,250 rubles.

Aesto A-03

Advantages:

• affordable price;
• safe operation;
• stylish design.

Flaws:

• small heating area.

Model name / birthplace of the brand Characteristics Average price

9 Sundays PH01-SSB

Another Chinese-made device is Sundays PH01-SSB. Unlike the previous device, this model, with almost the same thermal power, is capable of heating an open area within a radius of 6-7 meters from its axis. Otherwise, these two samples of thermal devices are very similar to each other. Floor lamp type design with a reflector above the burner. The control panel is equipped with a piezo ignition button and a gas flow regulator. The weight of the device without a cylinder is 16 kg. For ease of movement, there are transport rollers at the base of the cabinet. The safety equipment is the same: gas control and tilt angle sensors. The cost of installation is 13,500 rubles.

Sundays PH01-SSB

Advantages:

• smooth power adjustment;
• large heating area;
• The stainless steel body is not subject to corrosion.

Flaws:

• not identified.

Model name / birthplace of the brand Characteristics Average price

8 Ballu Vela Bogh-18

Floor lamp for heating outdoor areas. Capable of maintaining a comfortable temperature over an area of ​​18 m2. Made of stainless steel. The safety automation includes, in addition to gas control and tilt sensors, a carbon dioxide (CO2) level analyzer. The height of the device is 2.22 m, weight - 15 kg (without cylinder). Repairs under warranty are carried out within a calendar year. The manufacturer declares the performance of its product for five years.

Ballu Vela Bogh-18

Advantages:

• quality materials;
• stylish design;
• safe operation.

Flaws:

• small heating area.

Model name / birthplace of the brand Characteristics Average price

7 Jax Jogh 13000-PG

Before us is a gas IR emitter of the “pyramid” type, developed in Australia. A perfectly suitable device for the warm Australian climate. In our latitudes it is able to create comfortable conditions for a friendly autumn party on an area of ​​15 m2. The set of automatic safety sensors is standard: structure tilt control, gas control, CO2 level. The flame is formed in a quartz glass flask, closed, for safety reasons, with a mesh fence made of stainless steel wire. Jax Jogh 13000-PG consumes 1.0 kg of gas per hour. This is slightly more than the same parameter of previous samples. The height of the pyramid and its weight are 227 cm and 24 kg, respectively. The average cost of the device is 19,593 rubles.

Jax Jogh 13000-PG

Advantages:

• high-quality materials and assembly;
• stylish design;
• good evening lighting.

Flaws:

• increased gas consumption.

Model name / home of the brand Characteristics Average price

6 Heliosa 55 2000W

Electric infrared emitter from the Italian company Star Progetti. It is used for heating enclosed spaces with an area of ​​20 to 40 m2. On open terraces and verandas it gives a feeling of comfort and warmth on an area of ​​16 m2. It is mounted on the walls and installed on the floor, with a special stand. Powered by a 220 V network. Heliosa 55 2000 W has proven itself in small cafes, boutiques, greenhouses, and open areas. The average cost of the device is 20,215 rubles.

Heliosa 55 2000W

Advantages:

• small size and weight;
• Possibility of use indoors and outdoors;
• large heating area;
• stylish design.

Flaws:

• not identified.

Model name / home of the brand Characteristics Average price

5 Hugett Floor-R

Electric IR emitter of floor lamp type. Widely used in indoor and outdoor areas. The terraces, verandas, and patios of restaurants equipped with it attract guests until late autumn. In addition to warmth, it perfectly illuminates everything around, replacing several stationary lamps. The metal lampshade reflects the heat of the 3.0 kW halogen lamp, directing it directly to guests and objects. The height of the stand can be changed, creating a heating cone at your discretion. The low center of gravity of the device prevents it from falling. The lamp can work continuously for 5000 hours.

Hugett Floor-

Advantages:

• ease;
• sustainability;
• stylish design;
• safe operation.

Flaws:

• significant energy consumption.

Model name / home of the brand Characteristics Average price

4 Master Leto ML-5 Bronze

Outdoor heating gas unit from a Russian manufacturer. The design is a tetrahedral pyramid. The gas burns in a quartz glass flask, heating objects within a radius of 2.5 - 3 meters. If the veranda or gazebo is fenced with glass or film on at least three sides, the radius of spread of thermal radiation will double. At the base of the pyramid there is a cabinet for installing a cylinder with a capacity of 27 liters. Transport rollers are provided to move the structure. The set of safety devices is standard for equipment of this type: gas control and tilt angle sensor. Electric ignition is performed by pressing the piezoelectric element button. The average cost of the unit is 25,950 rubles. According to buyers, this is good value for money. For the specified amount, the user receives a heater with a lamp function and a garden design element.

Master Leto ML-5 Bronze

Advantages:

• reliability;
• durability;
• stylish design;
• safe operation.

Flaws:

• not identified.

Model name / home of the brand Characteristics Average price

3 Gardensun Heather Pyramid Black

Products of the Chinese company Jiangsu Gardensun Furnace Co. Ltd, is represented in the review by the Gardensun Heather Pyramid Black model. A pyramidal device that organically combines the functions of an outdoor heater, a lamp and decoration of a suburban area. The main purpose is to maintain a comfortable temperature on the terrace or veranda, within a radius of 4-5 meters. With the onset of dusk, the flames behind the tempered glass of the pyramid illuminate the site with oscillating tongues of living flame.

The structures are made of stainless steel. Operational safety is ensured by gas control and tilt angle sensors. A guard made of stainless steel rods protects the user from accidentally touching the hot glass. Transport rollers are provided for moving along the flooring. Piezoelectric ignition. Power adjustment is carried out manually by turning the gas valve handle in the indicated direction. The purchase will cost 24,990 rubles. This is the average price.

Advantages:

• stylish design;
• safe operation;
• advantages of a lamp and a heat wave emitter in one housing.

Flaws:

• high price;
• small heating area.

Model name / home of the brand Characteristics Average price

Recommendations for arranging the interior of a veranda

Veranda in colonial style.
Insulating and heating the veranda is half the battle; to make it pleasant and comfortable to be on, you need to decorate it in accordance with your tastes and preferences.

Interior design is a creative process; it is, as it were, the most pleasant and interesting stage of work. In order for the winter terrace to become a favorite vacation spot for all household members and guests, you need to decide in what style you want to see the fruits of your hands.

The design of the veranda can be made in the same style as the interior of the entire house, then simply decorate it with the same materials as other rooms, install similar furniture, hang curtains that echo the overall composition and decorate with suitable elements. But if you decide to take the interior of your veranda in a completely different direction, then we can offer some options for a winter veranda, finished in various styles.

Provence

Veranda made in Provence style.

This style is perfect for a country house or cottage; soft pastel colors with rare contrasting splashes harmoniously intertwine with the emerald greenery of the garden outside the windows in the summer, and surround you with warmth and comfort on frosty days.

Provence involves finishing with natural materials. For the walls I use wallpaper with small floral patterns, wooden lining, painting with “breathing” acrylic paints, and rough plaster.

The floors are covered with tongue-and-groove boards, floor slats or laminate with a pronounced wood texture, covered with colorless varnish or impregnation that does not hide the pattern. The furniture used is preferably wooden, made of solid wood; wicker or forged furniture with many cushions, little thoughts, frills and frills is also welcome.

The individuality of the style is emphasized by light curtains with floral patterns, wooden blinds, soft colorful homespun rugs, as well as many potted plants. Do-it-yourself room decoration elements are especially welcome.

Modern style

Winter insulated veranda in a modern style.

If you are a supporter of this direction, then there are no restrictions. You can use any modern materials in decoration, from plastic to glass and metal. All the latest technical advances in the production of furniture, lighting fixtures, and decorative elements will be appropriate on such a veranda.

The interior can harmoniously coexist with plastic chairs, a table with a glass or mirror top, a large TV on the wall, porcelain tiles with an incredible pattern on the floor, a huge soft transformable sofa, and an electric fireplace against the wall.

The rule of modern style is comfort and coziness for the owners, and it doesn’t matter whether the guests like it or not, the main thing is how you feel in such an environment. The photos we present will help you get a more complete idea of ​​the styles.

Eclectic

Eclectic style on the veranda.

This direction involves a mixture of several styles that are similar in spirit; it is a cocktail of old and new, for example, baroque and modern, classic and empire, ethnic style and high-tech. Usually there are 3-4 bright shades, one of which serves as the main tone, and the rest are used as finishing.

The walls can be painted with water-based paint in a single color, or the lower half can be finished with wood panels or ceramic tiles to match the upper half. The combination of different materials is the main highlight of the direction; the main thing is that all interior elements are connected by a single stylistic scheme.

The floors are made of mosaics, ceramics, and boards. It’s good if the pattern on the tiles is combined with the pattern on the curtains, the color of the sofa upholstery is duplicated in a bright print on the wall, and the smooth lines of the backs of the chairs are reflected in the curves of the frame of the large mirror.

You can talk for a long time about styles and trends in design; we have described the most commonly used design solutions for verandas. Beautiful winter verandas are made in Italian, ethnic, oriental styles; art deco and hi-tech look original and fresh.

The choice of direction depends only on your tastes and preferences; the video in this article will provide more complete information on this topic.