How to paint extruded polystyrene foam on the outside

Painting of foam plastic is carried out in order to protect the material from external influences (ultraviolet radiation, dust, dirt), increase the aesthetics of the finish and hide the joints between the slabs and elements. The main problem arises when choosing paint: not all compositions are compatible with the structure of polystyrene foam or have sufficient adhesion to its smooth surface. There are no specialized brands; most often, water-based or acrylic-based varieties are used, selected based on operating conditions. Maximum resistance to moisture is required for wet facades.

What paint can be used to paint polystyrene foam?

The main requirements put forward include:

1. The absence of acetone, toluene, ethyl acetate and other organic solvents and ethers in the composition; any of these substances will corrode the foam and destroy its structure. For this reason, the material cannot be painted with alkyd paints.
2. Good adhesion and elasticity. The cheapest and simplest oil paint, thinned with drying oil, is not suitable due to cracking after drying and peeling off from the foam.
3. Resistance to precipitation for external surfaces, withstand wet cleaning for internal surfaces.
4. Providing good protection of foam plastic from ultraviolet radiation and insolation (relevant for facades and areas near window openings).
5. Sufficient coating density.
6. Decorative effect, color preservation during operation.

The requirements are partially met by two types of paints: water-based and acrylic. The first variety is valued for its ease of application to foam plastic, vapor permeability and harmlessness, but due to its low resistance to moisture, it can only be painted on internal surfaces. Acrylic paints are more versatile, but their limitations include high price and fragility.

Which type is better to choose for interior work?

In this case, preference is given to affordable and harmless water-based brands; Snezhka, Dufa, Tikkurila, Caparol have the best reviews. They are applied in several layers (one is not enough, the structure will be visible) on the foam ceiling, wall panels and baseboards using a spray gun or brush and dry quickly without emitting an unpleasant odor. Water-based suspensions are quite attractive and do not fade.

To create a complex and multi-colored pattern, ordinary gouache is used; in this case, foam ceiling panels and decorative elements are decorated according to a template or painted individually. In this case, it is recommended to first paint the surface with one layer of water-based paint (to create a background and improve adhesion with the future pattern). Important nuances include the need to thoroughly dry each layer; foam itself does not absorb moisture, so the process takes a lot of time. Also, all joints and seams are covered with sealant.

It is recommended to paint areas exposed to intense moisture and contamination with expensive silicone compounds; they are better able to withstand frequent washing. Despite their high cost, they are chosen to protect foam panels or baseboards in bathrooms, kitchens and children's rooms. An alternative option is to cover it with acrylic paints: aerosols without freon from cans or regular brands. But it should be taken into account that such finishing needs frequent updating.

How and with what to paint polystyrene foam outside?

In this case, they stop at specialized brands for facades on a silicone or acrylic basis: Tikkurila, Terraco, Düfa. The finishing process becomes much more complicated if the foam is located outside; almost all weather-resistant paints in one way or another contain substances that destroy the structure. Simply painting it with moisture-resistant and safe acrylic is not enough: the seams and dowels will be visible, and the coating itself will not last long.

Painting a foam plastic facade is allowed only after sealing and finishing the joints with tape, applying a thin layer of plaster or treating the slabs with liquid glass. The minimum number of layers is 2.

Regardless of the location of the surface, polystyrene foam should be painted in conditions of normal or low humidity and at an air temperature of at least +15 °C. Preliminary cleaning of overly dirty areas with water is allowed, but finishing work begins only after they have completely dried. When painting foam plastic boards, it is advisable to choose a brand that does not require dilution; it is recommended to move it well using a construction mixer immediately before application. Any tinting or additives are administered in small doses.

When using a brush, it is necessary to paint polystyrene foam in one direction; for processing relief elements and large areas, it is better to choose a spray gun. The compositions are applied in thin, even layers (up to 2-3 times), each subsequent one after the previous one has completely dried. It is advisable to paint baguettes, complex decorative items and ceiling skirting boards made of foam plastic before installation, but in this case special attention is paid to the joints. When applying paint, it is recommended to hide wallpapered walls or other areas adjacent to polystyrene foam with masking tape. The last condition concerns time - the internal elements are updated at any convenient time, but the facades need to be painted before the start of winter.

Advantages of painted material

Polystyrene foam is a very popular material in construction; it is used for both external and internal work. However, after some time it may lose its attractive appearance. In addition, the initially white decor may not match the color scheme of the room. These reasons force craftsmen to paint materials in a shade suitable for the interior.

Due to the fact that some compounds can destroy the structure of polystyrene foam, before starting work it is important to figure out what paint to paint it with. Foam plastic will retain its attractive appearance for a long time if this work is done correctly. In this state it will have more advantages:

• it will be protected from moisture, dust, grease stains and other aggressive influences;
• polystyrene foam that turns yellow over time will not become noticeable under a layer of paint;
• painting will make everyday care easier;
• the decor will harmoniously fit into the design of the premises.

How to paint a concrete floor with polystyrene foam varnish - see in this video:

The material is very light and easy to work with, so it is used by professionals and home craftsmen. It is widely used not only in interior decoration of premises. Elements made of foam plastic often decorate the facades of buildings, gardening areas, and insulate the facades of buildings with slabs. With the use of coloring agents you can realize many original ideas.

A correctly chosen coloring composition can keep structures and decorative items beautiful and attractive for a long time. In this form, they will be less sensitive to sunlight and other destructive factors.

Paint selection criteria

Foam products are sensitive to paints and varnishes. For this reason, you should carefully consider how to paint polystyrene foam so that it retains its appearance for a long time. Since this material does not tolerate acetone and other solvents, experts advise choosing water-based products. Such coatings are called water-dispersion. They can be:

Since foam does not tolerate solvents, the paint must be acrylic or water-based

• water-based;
• acrylic.

Any type of paint must meet basic requirements:

• it should fit well on the work surface;
• have high density and water resistance;
• be resistant to chemical influences.

All these parameters must correspond to the operating conditions of foam products.

However, not all foam items can be painted. The restriction applies, for example, to laminated plastic ceiling tiles. It just needs to be installed correctly, and it does not need painting.

Why plaster insulation?

Despite many advantages, insulation also has disadvantages:

1. Subject to mechanical stress;
2. Under the influence of sunlight it becomes deformed.

Therefore, this material itself needs to be protected from the effects of various environmental factors. And penoplex plaster is required. Most often, plaster is used for this. What mixture is suitable for plastering this insulation?

Let's try to figure it out.

Characteristics of coloring compositions

The range of coloring products is quite large. According to experts, it doesn’t matter what kind of paint you use to paint the foam, as long as it is water-based. This is due to the fact that the type of polymer almost does not reflect its properties. However, in order for the painting to be done efficiently, you should know the advantages and disadvantages of the compositions used.

The best paint option for polystyrene foam is acrylic.

Among the water-dispersed group of paints, acrylic paint has performed very well. This coating has the following positive properties:

• reliable protection against ultraviolet radiation;
• long service life;
• dries quickly and has no odor;
• health safety;
• ease of application;
• easy to clean if necessary;
• resistance to pollution;
• the composition is not affected by high temperature;
• a wide variety of shades.

Painted foam is easy to clean

In addition to the listed advantages, this coloring material has the only drawback - it is high cost. However, it is fully justified by significant advantages. A high-quality composition cannot be too cheap.

In addition to acrylic paints, you should pay attention to water-based coatings. They also have good properties. Among the advantages:

• environmental friendliness;
• lays down smoothly and has no odor;
• good vapor permeability;
• large color palette;
• average cost.

Ways to paint polystyrene foam for fishing: creating balls

Foam balls are used for fishing as bait. They can be painted in different colors. The need for painting is a controversial issue. Many people consider this action optional.

Painting the bait is done in several ways. This is how a permanent marker, a water-repellent felt-tip pen and a special aerosol are used. Working at home will cost more than buying ready-made bait. This process requires labor and time resources. That is why most fishermen buy ready-made balls and do not wonder how to paint the foam.

In addition to painting, you will have to add flavoring to the balls. To do this, the balls are sprayed with special aerosols. You can soak the foam in solutions with the addition of vanilla or garlic, dill, or cilantro. Such balls will be attractive to fish and guarantee a good catch.

Indoor work

The process of coloring foam products consists of several stages. Before you paint the foam, you need to prepare it. A primer is used for this. An aerosol composition is best suited for this purpose; it is simple and easy to apply to the desired object, the surface dries quickly and can be ready for subsequent work in a short time. This product is ideal for priming the desired element indoors.

Before you start painting parts, you need to prime them with an aerosol composition.

At the very beginning of work, you need to clean the surface with a damp cloth and wait until it is completely dry. When using an aerosol primer, it is recommended to shake the bottle for a few minutes before application and then coat the material with it.

The composition is sprayed quickly, applying a thin layer at a distance of 20 cm from the product. 3-5 layers of primer are enough to get a high-quality coating. After this, the material must dry completely. This takes approximately 30-30 minutes. Various irregularities or drips can be removed with a spatula, lightly touching the surface.

Dyeing technology

The process of giving the ceiling the desired color includes the following steps:

1. Treatment of hard-to-reach places. The joints of the tiles with the baguette are painted with a narrow brush, forming a strip 5-10 cm wide. The tool is immersed in the coloring composition up to half the bristles and squeezed out, removing the excess.
2. Distribution of paint over the surface. The layer is applied with a roller or brush in the direction of the light. The strips should touch each other's edges. The roller is moved from the corner to the center of the ceiling. To remove excess, the surface is treated with a semi-dry nozzle.
3. Reapplication. The painted foam is dried for 6-12 hours. The water-based emulsion is reapplied. The stripes are applied perpendicular to the previous ones.
4. Formation of the third layer. Start work from the corner opposite the window. The roller is moved parallel to the light beam. It is recommended to apply the last layer with a new nozzle. If it is missing, wash and dry the old one.

Sequence of actions during operation

To paint the outside and inside, select the desired type of composition. After choosing, you can start painting the product yourself. The easiest way to do this is to use a product in an aerosol package.

To paint polystyrene foam with your own hands, it is best to choose spray paint

Before starting work, shake the can for 1-2 minutes and then evenly cover the surface from a distance of 30 cm in 2-3 layers. Each time it must dry and only then can the next layer be applied. This method is considered the simplest if you learn how to work with a cylinder.

If the composition in a jar is used, painting is done using a brush or roller. The required amount of water is added to the paint to achieve a suitable consistency. If several tones are used, the composition should be mixed well before coating to obtain an even color. If the elements are painted in different colors, then the brush must be rinsed well with water each time.

To consolidate the result, you can use varnish. A special water-based varnish is often used in combination with acrylic paint to further protect the surface of the foam.

How to paint

The technology for painting penoplex depends on where the work is carried out.

Indoors

Interior work is carried out, as a rule, for decorative purposes. You can be less demanding when choosing paints for interior decoration. Such paint compositions may not have water-repellent, heat-saving and other properties required for outdoor work.

Inside the building, ordinary water-based paint can be used to paint penoplex. Before applying the coating, the penoplex is wiped with a dry cloth that does not leave lint behind.

Apply the composition in one or two layers, evenly, without the formation of drips or streaks. Use a paint roller on a wide surface; use a brush in hard-to-reach places. It is important to ensure that the pile of the roller is thick and short, otherwise the coating will lie unevenly.

How to paint a foam ceiling on a loggia, video

On the street

To paint penoplex outside the house, a mineral or facade dye is used.

• The first option contains lime and cement, so it is quite safe for penoplex.
• The second one also does not have components harmful to synthetic material, since it is made on the basis of silicate glass.

Before painting, penoplex is coated with an additional protective layer. For this purpose it is plastered. This not only increases the service life of the insulation, but also improves the appearance of the coating.

To apply coloring compositions outdoors, special sprayers are used. This painting technique allows you to quickly and evenly paint the entire surface. In a small space, you can use a roller.

Artistic coloring

Penoplex coated with a coloring composition is an excellent replacement for any interior decor. It makes interesting paintings and panels. To do this, it can be covered not with a uniform, but with a multi-level layer.

The technology for artistic painting of penoplex is carried out in the following sequence:

• the surface of the material is degreased;
• then the first (thick) layer of paint is applied, completely covering the space. A water-based pigment is suitable as a composition;
• after complete drying, draw the draft using a template and a simple pencil;
• the applied contour is painted over;
• if it is necessary to make a complex ornament, then it is applied in several layers;
• After each application the paint must dry. This will allow you to create a bright, three-dimensional drawing with clear, not smeared contours.

Additional painting tips

To avoid leaving streaks on the foam, move the brush in one direction. The purchased material for painting must have a high adhesion coefficient. In this case, it will easily lie on the material.

To paint foam plastic, you need to have two brushes, wide and thin.

If the paint contains solvents that are hazardous to polystyrene foam, then a layer of plaster should be applied to the surface to be treated. It will serve as protection against destruction.

For better quality painting, it is better to have two brushes: a flat one 4-5 cm wide and a thin round one for processing small details.

When working outdoors, paint should not be used if the temperature drops below +15 o C. The quality of the coating will be negatively affected by high humidity. It is advisable to use only waterproof material.

Acrylic paint cannot be used in low temperatures and high humidity.

Acrylic compounds tend to bubble if they are applied in a thick layer. Over time it will begin to fall off. Experts recommend using paints that are completely ready for painting. They will make the work easier for those who do not have the necessary experience in this matter and will help to obtain a high-quality result.

The process of painting foam plastic has many subtleties and pitfalls. However, following these tips, a home craftsman will be able to carry out painting efficiently and quickly.

Selecting colorants for polystyrene foam is a particularly difficult task. After all, this type of material does not tolerate contact well with organic solvents, on the basis of which most paint and varnish compositions are created. If we take into account the characteristics of polystyrene foam and the composition of the materials that create the decorative coating, painting polystyrene foam occurs quickly and efficiently.

Advice from professionals

• After priming the walls, sand off any hardened stains. Otherwise, the paint will make the defects more noticeable.
• Treating the foam surface with putty, plaster or liquid glass allows you to use paint with any chemical composition. The protection is applied to a fiberglass mesh. The resulting covering layer relieves the PPS from aggressive coloring compounds and increases its resistance to destruction.
• To avoid getting a blueberry-colored jar instead of the desired forget-me-not shade, first mix a test batch of the color with paint. And then - the main part in adjusted proportions.

Painting foam plastic does not require years of experience, and the result will not lead to disappointment if you approach the matter thoroughly. Choose suitable compositions, maintain uniformity and do not rush to apply the next layers. Bright works to you!

Popular paint and varnish compositions

The market offers a large selection of products that are widely used in exterior and interior work. But not every option is suitable for this purpose. Still, how to paint polystyrene foam? Let's look at each option in more detail:

• alkyd. To achieve optimal consistency, the paint is diluted with acetone, white spirit or solvent. Such components destroy the protective layer of polystyrene foam, making it unusable. Therefore, the option is categorically not recommended for use in this case;
• oil Drying oil is used in the production of paints. It does not have a negative effect on the surface of the panels, but its structure does not allow achieving the appropriate decorative effect. In this case, a “vitreous” coating is expected to appear. In addition, it has low strength;
• water-based. The products do not contain organic solvents. Therefore, water-based paint is considered the best option for creating a durable decorative coating. In addition, the acrylic pigments present in the composition have good adhesive properties. But when performing repair work, it is worth considering the type of material, since paint for external and internal work is produced separately.

Also suitable for this purpose is the use of acrylic aerosols that do not contain freon. If the finishing work is carried out correctly, the durability of such a coating is ensured. But unlike water-based paints, aerosols are more expensive.

Stages of work

A step-by-step work diagram is presented using the example of painting the facade of a building. In this case, all existing nuances and aspects will be affected, since the facade is regularly exposed to ultraviolet rays, precipitation and temperature changes in spring and autumn.

After the panels are fixed to the outside of the walls, you can begin to work, namely, to create a high-quality base for paint. The following work steps must be completed:

• surface leveling. It is necessary to make the existing joints as invisible as possible, and also to level the areas where the dowels were located;
• cleaning It is necessary to remove accumulated dust and dirt from the surface. Otherwise, the adhesive properties of the soil composition will be lower than expected;
• primer. For this you can use a regular acrylic composition. The primer is poorly absorbed into the surface of the panels, so during the work, characteristic smudges may form, which will subsequently need to be removed with a spatula, otherwise, when creating a decorative coating, the paint will repeat the relief of all the formed drops.

Preliminary work allows you to create a durable and uniform surface without protrusions and gaps. Once all steps have been followed, you can begin painting. The process itself is quite easy. If you have the necessary tools, it can be performed by a person without the appropriate education.

Required Tools

To work you need to buy:

When painting a large area, it is appropriate to use a special device - a spray gun.

The material must be given the appropriate shade and poured into a pre-prepared bath. Using a roller, the decorative coating is applied to the wall surface. The tool must be operated correctly. The roller should move in one direction, namely, down-up. Such movements help minimize the appearance of streaks on the surface.

After the first layer has dried, you need to paint the walls again in the same color. Compliance with the stages of work involves creating a beautiful and uniform coating with a perfectly even tone.

Our company sells materials for thermal insulation. The catalog contains high-quality and highly technical products. Here you can choose materials for insulating buildings for different purposes.