Installing a boiler in a heating system: description of design, installation and operation specifics


Is it possible to make heating using a water heater?

Initially, the idea seems difficult to implement, but with proper calculation and proper implementation, it is quite possible to heat a house using a boiler. It is important to consider several nuances here

  1. the capabilities of this equipment will be sufficient to service small areas on average from 30-100 m2
  2. A prerequisite for the operation of such a system is the connection of a circulation pump
  3. in some cases, it will not be possible to provide both hot water supply (DHW) and heating from a boiler made by yourself due to the limited resource of this device
  4. special attention should be paid to the issues of thermal insulation of the storage tank, as well as the heated room

For the most efficient operation of the complex, it is important to accurately calculate all the parameters of the future homemade boiler, additional devices, and the engineering system itself.

Main technical characteristics

  1. Power. Its choice depends on the heated area. On average, the calculation is taken from the ratio of 1 kW boiler – 1 m2 of room area.
  2. Storage tank volume. The amount of coolant in the system directly depends on this indicator, so the larger it is, the more productive it will be. The best option is to choose a container of 300 liters or more.
  3. Location of pipes. It is advisable that the cold water inlet be at the bottom and the hot water outlet at the top of the housing. In this case, heating from the boiler will be effective since the scheme with opposite placement of connections implies the impossibility of mixing flows with different temperatures. As a result, the maximum heated coolant will flow from the device into the system.
  4. Diameter of connections. Most often, ¾-inch pipes or flexible connections are used to install a water heater. To install a heating complex, it is recommended to use wiring with a diameter of 2 inches.
  5. The degree of branching of the complex. The fewer circuits and consumers, the easier it will be to maintain a comfortable temperature.
  6. Circulation pump flow. Determines the ability to pass a certain volume of working medium per unit of time. The larger it is, the faster the coolant will move through the pipeline.

What to do if the boiler produces less hot water

Don't worry if you notice that your heater is producing less hot water than usual.

If you decide to use a water heater (boiler) during the cold season, please note that the temperature of the water entering the water heater tank is significantly lower than in other seasons. Thus, the time required for heating increases, and accordingly, your waiting time also increases. Another reason for a decrease in the amount of hot water may be an unclosed riser

If you don't screw the faucet tightly and don't turn off the water, then all the neighbors in your house will also be able to enjoy a hot bath. Therefore, it is better to once again check how tightly the tap is closed, and whether the water supply is turned off

Another reason for a decrease in the amount of hot water may be an unclosed riser. If you don't screw the faucet tightly and don't turn off the water, then all the neighbors in your house will also be able to enjoy a hot bath. Therefore, it is better to once again check how tightly the tap is closed, and whether the water supply is turned off.

Advantages and disadvantages of heating using a water heater

Like any system, this one has its pros and cons. Let's consider the benefits

  1. reduction of cash costs for the purchase of equipment. Boilers are an order of magnitude more expensive than heaters, and using an old tank will generally reduce costs to a minimum
  2. ease of installation. Installing heating from a water boiler only with your own hands without involving third-party specialists is a completely solvable task
  3. minimal energy loss. Any heater model includes a thermal insulation layer, which is almost always absent from the boiler.

The disadvantages of such a complex include the low power level. It will not be possible to achieve high performance, even if you use a device with a high-performance heating element and a significant tank capacity. The maximum that the design is capable of is the preparation of coolant for hot water supply and heating of a small private house, cottage, or apartment. In addition, the life of the boiler is not designed for uninterrupted operation, which is necessary to maintain a comfortable temperature in the premises. Operating at maximum capacity can lead to a significant reduction in its service life.

Instructions for the first start-up of the BKN system

After the BKN is completely connected to the coolant and the hot water supply line and pressurized for leaks, proceed to its first start-up:

  1. Open the taps on the supply and return of the coolant from an external heating source.
  2. Open the hot water tap on the mixer and release the air until a steady flow of water comes out of the tap, after which the water on the mixer is turned off.
  3. Set the heating temperature using the thermostat and wait for the water to heat up to the desired temperature or control it using the readings of a dial thermometer.

During the heating process, a thorough external inspection of the structure is once again carried out for density and the thermal insulation qualities of the tank are checked.

During the first start-up, the heating time of the boiler at maximum coolant parameters is monitored, as well as the operation of the automatic control and safety system.

Selection of design and materials for installation

First of all, you need to decide on the type of water heater that will act as a boiler. This characteristic will largely affect the installation and connection algorithm. Here you can use one of three types of equipment

  1. Gas. In order for heating from a water heater equipped with your own hands to be energy efficient, it is recommended to use flow-through devices that operate online. They usually have sufficient power and performance, in addition, gas as a fuel is economical. When organizing such a system, it is important to pay special attention to safety issues, since overheating, burner extinguishing or lack of draft in the chimney can lead to emergency situations.
  2. Electric. In this case, the heat generator is created on the basis of a storage tank with a heating element. It is better to choose models with a “dry” heating element, as they are less susceptible to corrosion. It is also necessary to take into account its power, which should be from 8 kW. It makes no sense to install devices with smaller parameters in the heating system. It is also important to pay attention to the condition of the wiring, which must be able to withstand peak loads. It would be a good idea to calculate the operating costs of the complex, since electrical equipment is more expensive than fuel-powered units.
  3. Indirect heating. Such equipment is a storage tank equipped with a coil that is connected to the boiler. The heated working medium circulates inside this tube. In this scheme, the boiler acts as an energy accumulator, which, after turning off the main unit, heats the coolant in the coil. Here, heating from a water heater is created with your own hands to increase the power of an existing complex. At the same time, it is possible to provide hot water supply in full. The main thing is to correctly calculate the tank capacity.

Boiler market overview

Today, there are many Russian and foreign manufacturers on the domestic water heater market, although the latter are predominantly dominant: MTS, Lorenzi Vasco and others.

Many manufacturers are opening full-cycle production in Russia, producing basic components. This allows us to reduce the price on the domestic market and increase the availability of products for a wide range of consumers. One of these developers is considered to be the Italian corporation Ariston, whose heaters have actually already become a domestic brand.

It has been successfully operating in the Russian market for a long period of time, opening its factories and providing Russians with high-quality heaters. The range of models includes various types of water heating equipment.

Ariston is one of the most recognizable brands of water heatersSource goods.ru

The prevalence of Ariston boilers among buyers is quite high due to the quality of the products and the regular introduction of innovative technologies.

Before using the Ariston water heater, let’s consider its technological and design features:

  • the model range includes round and flat heaters of various sizes with a bright design;
  • high-quality thermal insulation of boilers and automatic control of operating modes make it possible to save on electricity;
  • heater tanks are made of special stainless steel with increased anti-corrosion resistance;
  • different models use electronic and mechanical control, which makes it possible to control the water heating process;
  • in instantaneous boilers, the heating module is made of copper, which increases its service life;
  • In a number of boiler models, the internal coating of the tanks is covered with bioglass porcelain, which completely eliminates the occurrence of corrosion.

In addition, the product range includes electric heaters with a mixed water heating system.

Ariston water heater with touch controlSource santeh.ks.ua

How to make your own heating

Depending on what type of boiler: gas, electric or indirect was chosen, the connection algorithm is slightly different

Scheme with a gas water heater

To adapt the device to new operating conditions, it is necessary to take a number of measures

  1. install a circulation pump into the supply line of the system, which will regulate the speed of the coolant
  2. install a hydraulic arrow. Then the heating from a water heater assembled with your own hands will be more balanced. In addition, it will ensure the safe operation of the complex in the event of all radiators being turned off.
  3. organize fresh ventilation in the boiler room, which will ensure the presence of a sufficient amount of air for burning gas in the burner

System with indirect water boiler

This option is the easiest to implement, as it requires minimal system reorganization. In this case, the device simply cuts into the supply line as close as possible to the boiler in order to avoid heat loss as much as possible. The coil of the main energy source passes through the tank, is heated by the hot water accumulated in it and is discharged further into the heating network. Additionally, the boiler is connected to the DHW to meet its needs.

Electric boiler from a water heater

Equipment calculated based on power and tank volume must first be connected to the network. To do this, it is recommended to draw a separate grounding line from the panel, which must have an RCD (residual current device) on it. The boiler is connected to the heating pipe of the house by the corresponding pipes: the inlet for the return line, the outlet for the supply. The forced movement of the working medium through the system will be provided by a circulation pump.

Although it is possible to construct an electric boiler from a water heater with your own hands, it is unlikely to be able to ensure that it covers the needs of the hot water supply. The reason for this is the limited resource of the equipment. If you use the boiler as a double-circuit boiler, its service life will be reduced to a minimum.

Installation of a heating water heater

The body of the unit is placed on the floor, as it has significant weight. The equipment may include height-adjustable legs. If they are not available, to install it, it is recommended to pour a separate concrete platform and put a layer of thermal insulation on it. It is important that the tank is positioned strictly vertically, which must be checked for level.

Do-it-yourself heating from a water heater is installed in a standard manner, for which the diagram is shown in Figure 1. A safety valve is installed at the inlet to regulate the pressure, and at the point of supply from the cold water complex, a shut-off valve is connected to prevent the reverse movement of the coolant.

A circulation pump is installed on the supply line after the hot water supply comb, ensuring forced movement of the working medium through the heating system. If DHW is not provided for in the engineering complex plan, the boiler is connected directly to the heating distribution.

Required Tools

In order for the scheme to connect the boiler to the water supply to be implemented without problems, it is necessary to prepare everything necessary in advance.

The list of tools and materials includes:

  • measuring devices (ruler or tape measure),
  • impact tool for drilling and drill bits in a set (you can use a hammer drill or a drill with an impact function),
  • fastening elements for mounting the unit on the wall (brackets, anchors),
  • mounting keys for connecting elements (it is optimal to supplement the kit with pliers and an adjustable wrench),
  • tees (fittings designed for insertion into water pipes),
  • shut-off valves (they should be installed at the entrances to the boilers to ensure that the equipment can be turned off, for example, for repairs)
  • materials to ensure the tightness of connections (tow, special paste, sealing tape),
  • flexible hoses (with their help, liquid is introduced into and out of the heater).

When preparing materials and tools, take into account the individual characteristics of connecting the water heater to the water supply system - the scheme may involve extending pipes or creating a bypass line. In this case, you need to purchase pipes, choosing them according to their technical characteristics (it is important to remember that not all materials are resistant to high temperatures).

Find out what rules exist for installing water meters in an apartment. The article also describes the sequence of installation of devices.

Recommendations for use

Ensuring long-term and uninterrupted operation of the heater is possible with systematic maintenance, which includes

  1. Cleaning the storage tank. If this is an electrical device, then so is the heating element. It is necessary to remove scale, which quickly corrodes metal walls.
  2. Timely replacement of the magnesium anode. This point also applies to electric boilers.
  3. Check the integrity of the thermal insulation layer, as damage to it will cause serious heat loss.
  4. Checking pipe connections and fittings for leaks. A leak that is not detected in time can cause a decrease in the efficiency of the entire system.
Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]