Universal 8 kW diesel heater for garage, camping or greenhouse

Distinctive features

A stove assembled by yourself has a number of advantages:

• it saves fuel;
• if desired, you can design a stove of any size, which will be the most suitable option for a given room;
• easy to transport;
• ease of use;
• The oven dripper can be used for cooking. To do this, when constructing a stove, the pipe is placed on the side.

Diagram of a diesel-powered dropper stove. This is a very economical design. Complete combustion of compounds occurs in the furnace chamber

When making a drip stove with your own hands, you need to follow fire safety precautions:

• the device must be located in a draft-free room;
• flammable objects should be absent near the stove; it is advisable to have free space next to it (about half a meter);
• Do not use water to extinguish or cool the stove.

Materials needed to build the furnace:

• sheet metal;
• copper pipe;
• pipe branch;
• rubber hose;
• gas cylinder;
• screws;
• medical burner.

The main tools that will be useful for the job are a welding machine, a drill and a clamp.

A popular do-it-yourself device is a drip stove made from a gas cylinder

Step-by-step instruction

Wood-burning garage stoves, for example, the same potbelly stove, “eat” a lot of fuel. Now, if the consumption were lower, there would be no price for it. However, craftsmen came up with an alternative that solved this problem - a long-burning stove. Such a stove can use any solid fuel with minor modifications. The essence of the operation of such a stove is that combustion is replaced by smoldering - one bookmark is enough for 15 hours of operation.

Materials and tools

To make such a stove with your own hands you will need:

• an ordinary metal barrel;
• steel pipe, two sections with a diameter of 10 and 15 cm;
• steel sheet + channel;
• tools for working with metal: welding, hacksaw, hammer;
• roulette

Additionally:

• masonry material: mortar + brick (no more than 50 pieces);
• sheet of metal for the reflector.

Technical process

First of all, you need to carefully cut off the top of the barrel (we will need it later, so the work must be done carefully). Next, cut out a circle from a sheet of metal with a diameter slightly smaller than the diameter of the barrel. To this circle, on one side, you need to weld a channel (height - 15-20 cm), and on the other side, weld a pipe with a diameter of 10 cm. Be careful here: the length of the welded piece of pipe should be 20-25 cm longer than the height of the barrel. As a result, we got a steel pancake with a long handle that will move inside the barrel body and push through, “compact” the burnt fuel.”

Now we need to strengthen the stability of the structure. We weld a round or square steel sheet larger than the diameter of the barrel to the bottom of the barrel, thereby improving the stability of the structure.

Next, we cut a hole on the barrel itself and make a door for storing fuel (we cut this hole slightly above the middle of the barrel. And we make a second hole and a door at the bottom of the barrel body to remove spent fuel. Next, we adapt the previously cut off top of the barrel as a lid for a furnace, having previously made hole for passing a pipe with a diameter of 10 cm.

DIY potbelly stove

We make a pipe for the chimney from the second piece of work, 15 cm in diameter, welding it vertically closer to the upper edge of the stove and slightly to the side

Important! The vertical piece of the chimney must be longer than the diameter of the barrel, and then it can be mounted at angles, but not more than 45 degrees. The oven is ready

Further, if desired, the stove can be lined with brick.

Self-production

To do this, you will need a tank with a volume of at least 2 liters. There will be no smoke or soot during stove operation. During the process of igniting the stove, it will, so this process is recommended to be carried out outdoors.

Diesel from the fuel tank enters the wick cup. Using the dispenser, you can regulate the amount of incoming fuel. In the combustion cup, the fuel is heated until a gaseous mixture is formed, which then enters the combustion chamber. The spiral, which is located at the top of the chamber, is heated to a temperature of 800 °C. The smoke escapes through the chimney.

You can make your own apparatus weighing six kilograms. Diesel fuel is a fuel with a fairly high density, so its consumption is minimal. Overall, this stove is an efficient and easily transportable design.

Description of the heating device

The stove uses liquid fuel during operation, it can be diesel fuel or kerosene. From the fuel tank, diesel fuel enters the wick compartment under its own gravity or gravity. This feed is regulated by a special device. After heating, diesel fuel releases volatile substances that enter the combustion chamber and release additional heat during combustion. In store-bought versions, the designers have provided for compact vapor distribution, which leads to uniform combustion.

The design includes a removable fuel tank with a valve and screw for adjustment. A block with a valve is installed, the grille is removable, there is a reflector and a burner. The reflector is treated with a powder-based dye, which increases heating.

It is actively used by private owners in non-residential premises, for example, garages, basements, greenhouses, tents. They perfectly complement the recreation of tourists and fishermen, but are rarely used in residential premises if there are no alternative heating options and there is no electricity.

Positive and negative sides

The advantages include:

• uniform heat distribution in the room;
• does not depend on the electrical network;
• the combustion process is completely under control;
• the cost of the unit is affordable for all users, installation is simple;
• no soot or smoke is emitted during proper operation;
• works economically, can be rearranged and carried due to its low weight and dimensions;
• a fire-safe option.

Disadvantages are manifested in shortcomings:

• does not work on unrefined oil;
• not used in unventilated rooms due to the unpleasant odor from combustion;
• low-inertia unit.

Safety requirements

For normal operation without unforeseen situations, certain measures must be observed:

• the heating unit is not located near flammable objects and materials, and the installation site is not cluttered;
• Do not place containers with contents weighing more than 5 kg on the cooking grate;
• if there is no ventilation system or blind window openings, then you cannot use a miracle stove using liquid fuel;
• the stove is placed on a base that is covered with refractory material (asbestos, ceramics, brick);
• do not use other types of fuel other than those specified in the instructions;
• prevent water from entering the fuel tank.

Waste oil dripper stove

One type of cheap fuel is used oil. The stove can heat up to 800-900 °C. At the outlet the temperature will be 90 °C.

Pour a portion of oil and add 50-100 g of ignition agent (special fluid, heating oil, kerosene or diesel fuel). This is necessary to quickly ignite the stove. Wait until the combustion process stabilizes. Then you can pour in the next portion.

If there is any spilled oil, it must be removed immediately. Combustion occurs inside the pipe. This is a safe process. Fuel consumption is from 0.5 to 1.5 liters per hour. When the stove lights up, you can heat the water.

Waste oil dripper stove

Recommended for use: diesel oil, fuel oil, waste oil, heating oil. Do not use gasoline, acetone or other solvents. Avoid getting water into the fuel.

Special literature contains a large number of detailed instructions on how to make a drip stove with your own hands. Each of these designs is unique and has its own advantages and disadvantages. You can also use a store-bought version of the stove, but modify it at your own discretion.

Security measures

Please note that when installing a diesel stove, you should take into account safety regulations and recommendations of specialists:

• the length of the chimney must be at least 4 m;
• Instead of diesel fuel, used oil can be used;
• the oven requires periodic cleaning - every two weeks with regular use;
• for kindling you need a rag or a piece of newspaper soaked in diesel fuel - it needs to be set on fire and placed in the combustion chamber, the rest of the fuel will ignite when the required temperature is reached;
• the heated room must be protected from drafts, but at the same time ensure high-quality ventilation;
• toxic combustion products are formed only during the ignition process - a special outlet can be built for them;
• The stove must be installed at a distance from flammable objects to avoid fire;
• There should be at least 50 cm of free space around the stove on all sides.

Diesel heaters: specifics of the device and options for self-production

Storing a vehicle in a heated and dry garage significantly extends its service life, and also allows you to significantly reduce the cost of purchasing antifreeze and car maintenance.

In addition, in a dry and warm room you have the opportunity to maintain your vehicle yourself. A diesel heater will help organize inexpensive, but at the same time high-quality heating in the garage. Now we’ll try to figure out how such a miracle stove works and how you can assemble it on your own.

Design of heating equipment running on diesel fuel

A factory or homemade diesel garage heater is multifunctional equipment. It can be used as the main, additional or alternative source of thermal energy if there is a heating system already installed in the room.

If necessary, the stove can be used as a hob: food can be quickly heated on it and the kettle can boil.

Important! Diesel heaters are strictly prohibited from being installed in poorly ventilated areas. And if during operation the stove almost does not emit harmful substances into the atmosphere, then during the ignition and extinguishing of the fire, emissions of a small amount of compounds hazardous to human health are observed in the smoke.

Many models of diesel stoves can operate not only on DP, but also on other types of liquid fuel. Judging by reviews from consumers and some experts, the best option in this case is kerosene. But due to a huge desire to save money, people prefer diesel fuel.

Heaters of this type consist of a fuel tank - in most cases it is removable, equipped with a valve, a replaceable block with a wick, an adjusting screw, a reflector and the burner itself. All structural elements are located in a common housing.

If we are talking about homemade equipment, then a barrel, a tank welded from sheets of heat-resistant steel, or even a used gas cylinder will work as a body.

The burner is placed in the center of the structure. Fuel is supplied to it from a tank located at the rear wall of the device body. In order to achieve the required temperature, an adjustment screw is used. And due to the reflector included in the design, quick and reliable heating of the room is ensured.

If you plan to purchase a factory heater, then it is better to give preference to compact models weighing 10-20 kg. Such equipment, if necessary, can be easily moved to another location using your own resources.

Tools

You only need cutting tools: grinder, jigsaw, knife. All work is carried out manually and does not require special equipment.

Installation diagram

There are several types of chimneys; the most suitable type of design is selected individually.

Installation methods

It is important to take into account the collection of condensate in the system, so it is necessary to have a plug, a condensate drain and a container for collecting condensate. If the potbelly stove is installed through a wall from a pipeline located on the street, then it would be advisable to lead the chimney through a window so that you do not have to prepare a hole for the pipeline in the ceiling

If the potbelly stove is installed through a wall from a pipeline located on the street, then it would be advisable to lead the chimney through a window so that you do not have to prepare a hole for the pipeline in the ceiling.

The outer part of the chimney is insulated using thermal insulation and covered with protective material. A fungus is installed at the end of the pipe, which will protect the chimney from debris, rain, various small animals and foreign objects.

Floor preparation

The chimney pipe for a potbelly stove is most often installed in such a way that it passes through the ceiling, therefore, before installing and fixing the pipeline structure, it is necessary to make a hole for it in the ceiling: using a jigsaw or other cutting tool, having a diameter suitable for the passage of a glass for elbows of the internal chimney.

Example of a hole for a chimney pipe

Pass-through glass

The passage glass is installed in the hole before the chimney for the potbelly stove is assembled. The diameter of the glass should be selected according to the diameter of the inner pipe, although sometimes the joint is made before the chimney passes through the ceiling

It should be understood that it is important to secure the glass tightly - it serves as a retainer. But in addition to this, the pipeline must also be attached to the wall surface

If installed incorrectly, the following consequences may occur:

If there are easily flammable materials, insulation or wooden parts in the ceiling, then they must be removed so that they do not come into contact with the passage glass.

Once the pipe has been inserted, the whole thing needs to be sealed with a fire-resistant material, such as heat-resistant sealant or special fire-resistant wool.

The following stages of work are shown in the photo:

Sealing

Pipe outlet to the roof

Roof work

At the last stage you need to put a deflector on the pipe

Tips for working

• The pipes used in the structure are located exclusively in a vertical position; to fix them, it is best to use special brackets with dimensions corresponding to the elbows of the system. To save money, you can make the brackets yourself using a metal corner.
• All connections must be treated with sealant so that there are no holes through which smoke can escape into the room air. There is a large selection of sealants on the market that are suitable for sealing pipeline seams for smoke exit:

1. High temperature sealants;
2. Heat-resistant sealants;
3. Heat-resistant sealants;
4. Heat-resistant sealants;

High temperature and heat resistant sealants are used to seal areas that reach temperatures of 350 degrees Celsius. Since the chimney for a potbelly stove heats up to higher temperatures, these types of sealants are only suitable for parts outside the piping system.

Heat-resistant and heat-resistant polymers can withstand enormous temperatures, up to 1500 degrees Celsius - they are the most suitable choice for a potbelly stove chimney.

Connecting the chimney to the stove

The chimney coming out of the potbelly stove, called internal, is connected to the street, external pipeline, in the attic or in the under-roof part of the roof. The beginning of the internal chimney is the segment coming out of the stove pipe, which is joined at the elbow to the ceiling.

When installing an internal chimney, it is important to correctly connect the pipe to the stove pipe - since if this is done incorrectly, smoke may escape into the air in the room, which will make it impossible for the heating system to function properly. Expert opinion

Expert opinion

Pavel Kruglov

Stove maker with 25 years of experience

The chimney is connected to the potbelly stove using a heat-resistant seal and a special clamp

It is important to make a completely sealed structure, since any breakthrough of gases can lead to poisoning of those inside the room

Chimney connected to potbelly stove

Homemade stoves: assembly options

If you want to save money, you can try making a diesel stove for the garage on your own. Let's consider the most basic design options of this type and understand the specifics of their manufacture.

Option No. 1 - from a used gas cylinder

A diesel fuel stove can be made from a used gas cylinder. And if there is one, then consider that half of the structure is already ready. The main requirement for the manufacture of such a design is the thickness of the cylinder wall - it should not exceed 1.5 mm.

The next step is selecting a pipe for the chimney. A piece of pipe with a diameter of at least 10 cm will do. The length of the chimney must be at least 4 meters. The recommended metal wall thickness is 2 mm.

To make a diesel stove for a garage on your own, in this case you will need the following tools:

• Bulgarian;
• drill;
• welding machine;
• roulette;
• building level.

Algorithm for creating a diesel heater:

1. We free the container from condensation and rinse it from the odorant.
2. Using a grinder, cut off the top part where the valve is located.
3. The lower part of the cylinder will act as a chamber - we weld the legs to it, which are steel corners. The upper part is the lid of the future stove. In order to ensure the possibility of adjusting the fuel supply, a special valve is mounted in it.
4. After the stove is assembled and installed in the required location, we proceed to installing the chimney. It must be positioned strictly vertically. This nuance should be taken into account when choosing a place to install the heater: it should be located only in a place where it is possible to mount a chimney pipe without bends or slopes.

For reference! The cylinder can be placed both vertically and horizontally. In the first case, it is possible to use the metal legs of the structure as air ducts.

This type of design operates exclusively on diesel fuel or purified waste oil without water and alcohol impurities. The use of gasoline and kerosene as fuel is strictly prohibited.

Option No. 2 - from a welded tank

The structure can be made by welding sheets of heat-resistant steel, 4-6 mm thick. The only thing is that you will need to purchase or rent a sheet bending machine. Other consumables and tools are more freely available.

Most of them are in the arsenal of any man, while others can be purchased at a hardware store.

It is possible to implement this version of a diesel furnace with the following tools and consumables:

• steel corners with a shelf size of 20 mm - future legs of the structure;
• burner pipe;
• smoke exhaust pipe – Ø10 cm and 4 m long;
• roulette;
• Bulgarian;
• file;
• welding machine;
• building level;
• hammer.

The result should be a compact -70x50x35 mm and relatively light heater - about 26 kg. The design, when assembled correctly, is stable, easy to use and effective in terms of the speed of heating the room. Also, if there is an opportunity and desire, such a device can be connected to a water heating system.

For reference! Heat-resistant steel stoves are characterized by high durability. Garages and workshops are often equipped with these. Such devices can operate on diesel fuel, waste oil and diesel fuel.

The bottom of the fuel tank and its lid are made of thick steel sheet - 6-7 mm, and the tank itself is made of sheets 4 mm thick. First of all, you should choose a diagram of the future design - it can be found on the Internet.

According to the chosen scheme, sheets are cut out, which then need to be welded together, and the seams processed with a file.

The tank pipe is not difficult to make: we cut out a strip of metal 4 mm thick and 115 mm wide, bend it into a ring and weld it to the tank. The result should be a pipe Ø34-34.5 cm. It must be equipped with a lid: it is cut from a sheet 6 mm thick and welded to the pipe. And then we move on to making the legs.

The fuel tank is made of steel sheets 6 mm thick. We cut out a round piece Ø35.2 cm and a strip 6 mm wide. In the center of the circle we drill a hole for the future chimney - its diameter depends on the diametrical size of the chimney.

The optimal hole size for efficient operation of the structure is 100 mm. You will also need another hole for filling oil. It is slightly smaller in size than the previous one - 50-60 mm, and is located at a distance of 40 mm from the smoke exhaust duct.

From a sheet 6 mm thick, cut out a rectangular partition 7x33 cm and weld it to the circle, moving it closer to the pipe. The exhaust pipe is made from a section of a smoke exhaust pipe - a length of 13 cm will be quite enough.

To make a burner, we drill 48 holes Ø9 mm in the pipe with a pitch of 60 mm from each other. As a result, we should get 6 rows, each of which has 8 holes.

Now we move on to installing the burner: we place it evenly and tightly in the tank lid, correcting inaccuracies with a file. A Ø16 cm pipe is inserted into the fuel tank, after which we connect the upper and lower parts without using a welding machine.

To seal the structure, it is advisable to use a Ø35.4 cm ring. All that remains is to completely assemble the structure and install the sliding plate into it.

Option No. 3 – drip type model

To implement this version of the stove, you will need a regular rubber burner with a hose with a volume of 2 liters. We attach a copper tube 1-1.5 meters long to the hose, having previously bent it into the letter G.

Next, bend the hose in half and secure it with screw clamps. The burner itself is placed on the wall and fuel is poured into it. The fuel supply intensity is adjusted via a screw.

Our wick will be made of rags: we form it using flexible metal wire, which must be wrapped in a rag and soaked in diesel fuel. The best option would be to use an old mattress, which must be chopped into fuel briquettes measuring 20x10x4 cm.

These briquettes soaked in fuel will burn perfectly. If the stove is large, then it is advisable to place a brick under the wick, thereby increasing the efficiency of the heating equipment.

If you make this hole on the side of the barrel, then the stove can be used not only to heat the room, but also as a cooking surface.

Design examples

Potbelly stove

The easiest way is to convert a potbelly stove for diesel fuel. Thermal power will be up to 5-7 kW with a fuel consumption of 300-500 ml/hour. Fuel equipment of the same design can be used practically without changes in more powerful diesel heating boilers, as well as for starting with exhaust and kerosene.

The scheme for modifying a potbelly stove for diesel fuel is shown in Fig. below. Deflectors prevent fuel vapors from cooling before they burn. By the way, deflectors increase the efficiency of the stove when running on wood and coal. The height of the side of the flame bowl is 60-80 mm; its capacity should not be less than the capacity of the feeding reservoir (see below). The operation of a liquid fuel stove, so to speak, is reversed: air enters the wide open door of the firebox; the vent is closed. Otherwise, the stove becomes voracious and quickly becomes coked (overgrown with soot).

How to convert a potbelly stove to liquid fuel

Power, starting and running

A diesel fuel dropper stove will be quite safe and will show all its advantages only if the fuel equipment is assembled and adjusted correctly. The drip furnace must be fed in a 2-stage manner, with a buffer feed reservoir. The reason is a rather strong dependence of the drop frequency on the outside temperature and pressure in the supply pipeline. The pressure, in turn, is determined by the level of fuel in the tank or the degree of its pressurization. It dripped less often - the evaporator cooled down, the stove went out, the bowl overflowed and fuel flowed out. It began to drip more often - the drops did not have time to evaporate, there was a smoky flame in the bowl, the stove wasted fuel. If there is no nutrient reservoir, it can lead to disaster: a flaming stream will flow from the stove. Therefore, manufacturing and launching liquid fuel stoves with single-stage power supply is an activity for rabid extreme sports enthusiasts or those who have nothing else to lose and really want to sleep.

Both capillaries (see figure) are made of red copper. The point here is the wettability of the metal with fuel: it either will not leak through a narrow tube made of another material, or the power system will not be able to be established. Setting up begins with selecting the length of the safety capillary dia. 1.5 mm. The volume of the nutrient reservoir is required 0.25-0.5 l; its height is 7-12 cm. The length of the safety capillary is adjusted so that when the nutrient reservoir is filled to the top, the drop frequency is 25-30 drops per 10 s.

Next, adjust the nutrient capillary to dia. 0.6 mm; the fuel in the tank must be filled to full pressure H. With the needle valve fully open and the minimum permissible outside temperature, the frequency of drops from the fuel line into the feed tank should be 2-3 drops per 10 s less. The same drop frequency is set using a needle tap when starting the furnace at a higher outside temperature.

To start the furnace, a burning wick is placed in the fire bowl (see above). When it burns out as it should, pour fuel into the nutrient reservoir and let drops flow from the fuel line. The stove will be running for 4-5 hours; if shorter heating time is required, close the needle valve. Only from the nutrient reservoir the furnace operation will last 1-1.5 hours.

Drawings of a stove with a heater suitable for conversion to diesel fuel

For garage

Diesel and exhaust stove for garage

A diesel fuel stove for a garage should also be started during testing. The optimal design of a garage miracle stove is shown in Fig. on right; the flame bowl under the drips (extended) is also a container for non-pressure combustion of oil. Power - up to 5 kW per one afterburner column (riser), but making a stove with more than 2 risers is unacceptable, it can explode! Design data:

• Materials – square corrugated pipe 180x180x6 for the bed (combustion chamber) and afterburner, and 100x100x6 for risers.
• The length of the bed is 380 mm, the afterburner is 1000 mm, the height of the risers is 500 mm.
• There are 8 holes in the risers with a diameter of 10 mm on all 4 sides, evenly distributed along the axis.
• To start the furnace during mining, the feed tank must be disconnected and the dropper pipe must be plugged from the outside.
• A separate deflector is not needed; the sunbed cover serves as one.

Rules for the safe use of heaters

It is known that the garage is a place of increased fire danger.

And given that it is planned to be heated with liquid fuel equipment, it is worth taking the issue of placing the heating unit with full responsibility:

1. The oven is located in a place where there are no drafts. Also, it should not be near flammable liquids and objects.
2. There should be enough free space around the heating device - at least within a radius of 50 cm.
3. The most optimal would be to place the structure on a sheet of asbestos, metal or other non-combustible material.
4. Fuel, wicks and other consumables should be stored as far as possible from sources of fire.

Slobozhanka with a mushroom hat

The traditional Slobozhanka has disadvantages:

• It does not accept fatty and tarry fuels. Household waste, chipboard and fiberboard waste form hard deposits on the edges of the holes in the internal casing and the perforated casing of the air duct.
• Careful refueling of the unsmoldered filling is required, since at least a small smoldering area should remain free near the perforation of the casing. If this is not provided for, after the filling burns out, the stove will cool down.

The design with a central conical perforated air duct with a mushroom cap is the development of one of the Soviet mailboxes. Created on the basis of Slobozhanka. The cone was freely installed in the discharge hatch of the firebox and removed for cleaning.

The edges of the cap threw fuel to the edges, and a smoldering ring was formed under it, necessary for lighting the stove. Additional loading could be made in any quantity and at any time. Due to the edges of the hat, air was directed to the smoldering zone, which ensured the omnivorous design.

The disadvantage of the “slobozhanka with fungus” was that when burning household waste or damp pine it was necessary to check the soot. The cone could have become stuck tightly. In this case it was difficult to remove it without distorting it.

Advantages and disadvantages

Diesel stoves have a number of advantages over solid fuel boilers:

• compactness, mobility. Typically, such a device is small in size and occupies a small area. In addition, the diesel stove can be moved to any convenient place;
• high efficiency with low diesel consumption;
• lack of a chimney pipe. The construction of a chimney pipe in any room involves violating the integrity of the attic floor and roofing, which entails additional financial expenses both for the construction of the pipe itself and for the installation of heat-resistant materials in places where the pipe passes through the building envelope;
• combustion products during operation of a diesel fuel stove do not enter the room, which means you can be in it without fear for your health;
• the ability to adjust the temperature depending on the room temperature;
• the stove does not require blowing to reach full power.

The disadvantages of heating with a diesel stove include:

• the release of smoke and an unpleasant odor at the time of ignition, so to carry out this procedure it is better to take the unit outside;
• Diesel fuel has a specific smell, which is felt most strongly when refueling the device.

Where are they used?

Regardless of what type of fuel is used in heaters, all devices have one important advantage. They are able to work for quite a long time, without human participation and control.

As you already understand, heaters running on diesel fuel will be an excellent help in a greenhouse or garage. With their help, you can effectively heat a warehouse or industrial space. Portable, non-volatile models are convenient to take with you to the forest or fishing. With their help, you can not only heat your tent, but also quickly prepare hot food.

Infrared diesel heaters are successfully used on open verandas and work sites. And of course, with the help of such devices you can effectively heat a dacha or a small country house.

Device types

A diesel stove for a garage can have the following types of device:

double-circuit gas-air or heat gun. It warms up the room instantly, but uses a large amount of fuel. Difficult to manufacture, as it requires the use of turned, milled and stamped parts from heat-resistant materials;

wick furnace. Its device is similar to kerosene gas, only with increased consumption of flammable substances. When manufacturing it, it is important to observe the geometric parameters of all parts and assemblies, since in devices working with a wet wick, the amount of heat generated when the dimensions of the device increases grows much faster than it is released. A stove with an unfinished design may explode from overheating. This drawback limits the increase in thermal power;

A drip unit is an efficient, fuel-efficient, technically uncomplicated heating device, which can be easily built with your own hands from auxiliary materials.

How should the heating be in the garage?

For many motorists, the garage is almost a second home. Here they delve into their hobby, take a break from the hustle and bustle and take care of the car. Therefore, first of all, you should think about the comfort of the person who spends hours indoors.

Heating is also necessary for the car, because... low temperatures negatively affect its technical condition and significantly reduce its service life.

When it gets cold, the garage becomes too humid. Condensation forms on metal parts, which provokes corrosion processes. In a cold room, the car body quickly rusts and becomes unusable.

To keep the garage dry, you should take care of good waterproofing and ensure the normal operation of the ventilation system. However, moisture still gets into the room on the wheels of the car. It evaporates and drops of water settle on surfaces.

If there is no heating, moisture accumulates, causing fungus, mold, and rust to appear. To prevent this from happening, heating is necessary.

Low temperatures cause the oil to thicken and reduce battery capacity. This makes it difficult to start the engine and increases fuel consumption. Therefore, it makes sense to spend time and effort assembling a miracle stove

Features of garage operation determine the requirements for heating systems:

• Efficiency . The oven must heat the air quickly and maintain the desired temperature for several hours.
• Easy to use . When coming to the garage, its owner should spend a minimum of time and effort heating the room.
• Ease of maintenance . The stove must be inspected, cleaned, and repaired in a timely manner, so its design must be simple and understandable, and its parts must be easily replaceable.
• Availability of energy source . When choosing a heating system, fuel availability is of fundamental importance. A stove using diesel fuel, diesel fuel or waste oil is well suited for a garage.
• Safety . There is always some amount of flammable substances in the garage. Since these premises often serve as workshops and sheds, flammable materials will often be found here. Therefore, heating must comply with all fire safety standards.
• Cheapness. The costs of servicing a car and arranging a garage are already high, so saving on heating without compromising its quality is a pressing issue.

When choosing a suitable heating device, you should set priorities, because... the ideal is unattainable. The easiest to use are electric heaters. This energy source is available in almost any location.

However, the price of heating with electricity is too high, so it is worth considering other options.

Image gallery

Photo from

Heating with infrared heater

Homemade potbelly stove using solid fuel

Gas heat gun in the garage

Miracle diesel stove

The Miracle Oven is a great option. Such heating is cheap, and fuel (diesel fuel, kerosene or diesel fuel) is available and affordable.

There is a huge advantage in assembling a diesel stove with your own hands: you choose the design yourself and make a model that is ideal for specific operating conditions. You do not have to adapt the heating device or adapt to the peculiarities of its operation.

Criterias of choice

The main criteria for choosing a factory-made diesel fuel stove are:

• thermal power range;
• material of manufacture;
• product configuration and dimensions.

The device body must be made of corrosion-resistant and heat-resistant material. The best according to this criterion will be stoves made of stainless steel or cast iron.

The main part in factory models of diesel stoves is the burner or flask. After all, it is with its help that heat is generated. It can be made from:

The metal type of metal burner is less efficient than glass, but is more durable and can be used for cooking in the summer. If the device will be used only as a heating device, then it is better to choose a model with a glass burner. But it is better not to cook on it, since accidental ingress of water can lead to cracks on its surface.

The price of the device depends on the power of the device, the number of burners, dimensions and manufacturer. A domestically produced stove can be bought for 1,800 - 5,000 rubles; imported appliances of the same power are more expensive, ranging from 30,000 to 50,000 rubles.

Control systems

The device must be equipped with special automation that will turn it off when the flame control system overheats, regulate the temperature, and dose the diesel fuel to the burner. Therefore, it will be possible to leave such a stove for a long time without constant control from the owner.

Other versions

There are a large number of types of equipment for autonomous heating. Each type of garage heater has its own installation and application features. To correctly select a heating option that would be suitable for a particular room, you need to familiarize yourself in detail with the technical parameters of the heaters. Among the effective, efficient solutions are pellet stoves and coal-fired devices.

Pellet stoves

Pellet stoves are boilers that burn pellets made from pressed wood or wood waste.

Advantages of devices that run on this fuel:

• when the system runs out of fuel or the door suddenly opens, the device turns off automatically;
• pellets are much more efficient in terms of heat release than analogues that run on solid fuel.

Disadvantages of such systems:

• overpriced heaters compared to gas or electric counterparts;
• in garages remote from the city it is quite difficult to provide service;
• old models will need to be thoroughly cleaned (at least once every 15 days);
• Imported models are often not designed for use in harsh winters, since regular power surges can quickly cause breakdowns.

Pellet stovesPHOTO: avito.ru

Coal ovens

When installing any wood or coal heaters in a garage, it is necessary to ensure proper natural or forced ventilation. Advantages of such a device:

• simple design that you can make yourself from scrap materials;
• the device operates on any type of solid fuel;
• One load of the heater will provide positive temperature readings in an insulated garage throughout the day.

Disadvantages of the device, which are mainly characteristic of homemade designs:

• homemade appliances do not provide 99% of the efficiency that factory boilers provide;
• it is inconvenient to pull out the ash when there is no ash pan at the bottom;
• From the outside, the device has an unpresentable appearance; when aesthetics are required, it is recommended to buy a factory model.

Coal stoves PHOTO: drive2.ru

Popular models

Affordable, compact, economical, and not polluting the air with soot and harmful substances - solargas autonomous heaters are just such devices.

They have a simple design, are not picky about the quality of fuel, are made of stainless steel, therefore they are heat resistant, resistant to corrosion and do not rust. The characteristics of several models are shown in the table.

PO-1.8

PO-2.5

S-4.0

PO-5.0

Aeroheat HA S2600 BOXER

Aeroheat HA S2600 BOXER heaters use regular diesel fuel or kerosene to operate. They have great heat transfer and are able to heat a room of up to 30 square meters. meters.

• power -2.6 kW;
• fuel consumption - 0.2 l/h;
• fuel tank capacity - 2.5 l;
• weight - 4.5 kg;
• dimensions - 35 x 29 x 27 cm;
• burning time at 1 filling - 10-14 hours;

Master B35

Heat guns Master B35 CED (Italy) are of high quality. They are easy to use, do not create noise during operation, and ensure waste-free combustion of diesel fuel without polluting the air with combustion waste. The approximate price of products is from 18 to 20 thousand rubles.

• Efficiency - almost 100%;
• power - 10 kW;
• fuel consumption - 0.6 l/h;
• tank capacity - 15 l;
• air flow - up to 280 m³/h.

More powerful heating devices AOZH - 8.7 brand TRITON - are used for heating a room with an area of ​​60 - 70 m2.

• power -8.7 kW;
• fuel consumption - 0.18 - 0.8 l/h;
• fuel tank capacity - 2.5 l;
• weight - 45 kg;
• dimensions - 500 x 450 x 780 mm;
• burning time on 1 fuel fill is 10-14 hours.

Blitz tips

To summarize, here are the latest recommendations for the use of such stoves:

1. The intensity of the odor depends on the power of the stove, the quality of the fuel and the duration of operation. It is for this reason that they are rarely used for heating residential premises.
2. You can use not only diesel fuel as fuel, but also used engine oil. Its low cost allows you to significantly save money.
3. It is recommended to clean the stove from accumulated combustion products every 1-2 weeks; such care can significantly increase its service life.

How to do it yourself?

Materials and tools

First, you need to prepare a set of tools and necessary materials so that they are at hand and the process of assembling the stove is not interrupted for a long time. It should consist of:

• 50 liter cylinder for gas transportation;
• pipes Dn = 100 mm;
• profiled pipe 7x14 cm for making a fuel tank;
• copper alloy tubes;
• steel corner;
• sheet steel;
• welding unit;
• electric drill with a set of drills;
• roulette and level;
• hammer, pliers.

There are several options for the design of a diesel fuel stove for a garage, which you can make yourself. For example, consider a device based on an old gas cylinder. Pechnoy.guru will provide several examples of drawings, and the decision on implementation is up to you:

What the industry offers today - a review of economical garage stoves

Car radiator as a heat source connected to a wood stove