Water heater Ariston Ariston 80 liters. Instructions for connection and operation. Reviews. Video

How to choose the volume of a water heater

The capacity of the boiler is one of the main criteria that must be taken into account when purchasing.
Customer reviews and statistical analysis made it possible to determine the required amount of hot water depending on the number of consumers. For one person, a 30 liter Ariston heater is enough. If two people live in one apartment at the same time, a 50-liter Ariston will fully meet the need for hot water. A family of three or four people will need an 80-liter Ariston. If we are talking about providing a private cottage or a small restaurant, the best option would be “Ariston” with a capacity of 100 liters or more.

Boiler does not turn on

First of all, check the power supply to your storage water heater. Pay attention to the condition of the outlet, whether it is burnt or melted; this can happen due to inappropriate parameters of the outlet and the power of the device.

Test the wire with a tester or an indicator screwdriver; the wire may be broken. In a working wire, the indicator lights up only on the “phase”; there is no signal on “zero” and “ground”. Check the contacts connecting the wire and the water heater; over time, the contacts oxidize and “boil.”

If this happens, unscrew the wire, clean the contacts, then reconnect the power cable. Check the serviceability of the RCD by pressing the “Test” button; if the device turns off, this indicates that the RCD is serviceable. Check whether the wires on the electrical panel are securely connected; if the wire is unscrewed or loose, tighten it.

The reason may be that the fuse switches off during power surges or when the wire does not correspond to the parameters declared by the manufacturer. For Ariston 80 l, the cable must be marked H05VV-F 3 * 1.5 sq. mm, with a diameter of 8.5 mm, this should be taken into account in case of replacing a faulty cable.

Checking for correct operation

It’s great if the water heater is connected to a separate machine. If problems arise in its operation, this will not affect the power supply to other appliances in the house.

If after starting the heater the circuit breaker is knocked out, you can turn it on again. If the situation repeats itself, then there is a serious problem. The unit must be de-energized and a technician must be called.

Here are a few more details that need to be checked after putting the boiler into operation:

Inspect the hot water pipe to see if there is a leak. The fact is that a water heater can create more pressure than in risers. And if the gaskets are already worn out somewhere, but withstood the load from the central water supply, now they can give up.
Make sure that the light indicating the supply of voltage to the heating element comes on.
Take readings of how many degrees the meter shows at the very beginning of operation of the device, and then look at the temperature again after 20 minutes. If the data has increased, the heating element has successfully survived the rest period and is heating properly.

Due to their compact size and ease of use, instantaneous water heaters are in great demand. But you need to correctly assess your capabilities before deciding to install such a device yourself, because this process requires compliance with a number of rules. How to connect an instantaneous water heater: installation tips. read carefully.

You may be interested in the following information: how to drain water from a water heater and when it is necessary, read here.

Read about connecting the water heater to the water supply and to the electrical network here: https://microklimat.pro/otopitelnoe-oborudovanie/vodonagrevateli/ustanovka-svoimi-rukami.html. And also everything about choosing a place for the boiler.

How to turn it on

The design of all boilers (storage water heaters) is the same, so it depends little on the model and brand. Considering that, according to statistics, the most popular manufacturers among Russian consumers are Thermex and Ariston, using their example, we will tell you separately how to turn on the Thermex boiler and how to turn on the Ariston water heater.

The initial installation of equipment is mainly done by specialists, but switching on must be done by the users themselves.

So, how to turn on a Thermex water heater so as not to damage it and prevent mistakes. Connecting an instantaneous water heater is not fundamentally different - the air is also vented, the hot water pipe is shut off, the settings are set and it starts up. The only difference is that the storage one takes 2.5-3 hours to heat the water, and the flow-through one dispenses it after 5-15 seconds.

The shut-off valve on the hot water pipe is closed.

Even if a tap is installed on the pipe, shut-off valves are still used. The taps can let water through, and then the water from the boiler will go into the common riser.

Air is released from the system by opening the hot water tap and the outlet of hot water from the boiler itself; lastly, open the cold water tap. The presence of air can be determined by a ragged stream - it will flow intermittently and a “snorting” sound will be heard.
After the water flow has leveled off, close all the taps, including those on the device itself. Next, connect it to the network.

A separate grounded socket is always used for connection.

Before turning on the boiler, set the temperature and check the operation.

To make sure it works, do the following:

check the indicators;
check the temperature;
If the device is working properly, the temperature will rise after 15-20 minutes.

If the water heater does not turn on

The first thing you do is check the network elements - electricity, sockets, RCDs, automatic devices. Use a tester to check the voltage in the boiler to rule out a broken cable.

The most common problem is electronics. If power is supplied, but the Thermex water heater does not turn on, look at the error code on the display and check the instructions to see what it means.

breakdown of the heating element, contamination of the heating element with lime and calcium deposits;
thermostat failure - when the water temperature rises above 90-92 degrees, the RCD may be triggered;
there is no water in the tank - if there is water in the system, but it does not flow into the boiler, the reason may be that the air has not been bled.

Even if there was water in the tank before turning it on, but it has not been used for a long time, you should first drain the water, and then be sure to drain the air.

Let us repeat that there is no fundamental difference in connecting storage devices, so we will schematically describe how to turn on an Ariston boiler.

If we are talking about an apartment or house with a centralized supply of hot water, close the pipe with shut-off valves.
Open the tap in the place where the unit is installed and drain the water, close it.
You bleed the air from the boiler, for which you first open the inlet tap (the pipe is marked in blue), then the heated water tap (marked in red). Wait until all the air comes out and the water flows in an even stream without interruption.
Do not close the cold water supply tap - its quantity in the boiler is regulated automatically.
Plug it in and set the temperature on the device.
Check the functionality - after a few minutes the temperature in the tank should begin to increase.

What errors can you encounter during operation?

Peculiarities

The main feature of water heaters is a built-in tank in which the water maintains the temperature set by the program for quite a long time. This type of heater is suitable for people who often have problems with hot water. The most common is a water heater with a volume of eighty liters. It runs on one heating element and has a power of 1.5 kW. Accordingly, it can heat water to a maximum temperature of seventy-five degrees in three hours. This heater will be enough for a family of three people. The Ariston model, which has a capacity of 120 liters, has a power of 1.8 kW. As you can understand, the entire line is very economical, but at the same time not very fast.

Of course, externally such a water heater only benefits from this, but ease of use is much more important. By the way, it is worth noting that turning the boiler itself on and off is also done using a rotary knob. This approach to design leads to the fact that only the light indicator and thermometer are visible to everyone. But, despite minor shortcomings, all Ariston equipment has many advantages. Water heaters are no exception to the rule.

Stylish design will help decorate any interior.
Each model is created using new technologies.
Water heaters from this company have a long service life. This is achieved due to the fact that the inner sides of the storage tank are covered with a layer of modern material that protects it from the appearance of rye and plaque.

Supplemented with dividers that prevent mixing of cold and heated water.
Thanks to built-in temperature control sensors, the Ariston water heater has protection against overheating. A guarantee of safe use is a protective device that can operate in case of any voltage surges. Even if there is no water in the system itself, you don’t have to worry about it turning on by itself, because it has special protection.
Heaters from this company help save gas and electricity consumption. This is facilitated by thermal insulation, which keeps the water hot for a long time.
Many of the models are equipped with protection against the appearance of any bacteria. Thus, the water is already purified.

But when creating water heaters, it is impossible to do without disadvantages. There are not many of them, and the main problem is that some design parts fail from time to time. Very often the magnesium anode breaks, and then the water heater needs to be sent in for repairs. And the safety valve may also fail. All this is quite expensive.

What are the consequences of excess moisture in the soil?

You can see the results of this phenomenon yourself - trees and shrubs die. Why is this happening?

the oxygen content in the soil decreases and the carbon dioxide content increases, which leads to disruption of air exchange processes, water regime and nutritional regime in the soil;
oxygen starvation of the root-forming layer occurs, which leads to the death of plant roots;
the supply of macro and microelements by plants (nitrogen, phosphorus, potassium, etc.) is disrupted, because excess water washes out mobile forms of elements from the soil, and they become unavailable for absorption;
intensive breakdown of proteins occurs and, accordingly, the processes of decay are activated.

Plants can tell you at what level groundwater lies

Take a close look at the flora of your area. The species inhabiting it will tell you at what depth the groundwater layers are located:

perched water - it is best to dig a reservoir in this place;
at a depth of up to 0.5 m - marigold, horsetails, varieties of sedges grow - bladderwrack, holly, foxtail, Langsdorff's reed;
at a depth of 0.5 m to 1 m - meadowsweet, canary grass, ;
from 1 m to 1.5 m – favorable conditions for meadow fescue, bluegrass, mouse peas, rank;
from 1.5 m - wheatgrass, clover, wormwood, plantain.

What is important to know when planning site drainage

Each group of plants has its own moisture needs:

with a groundwater depth of 0.5 to 1 m, vegetables and annual flowers can grow in high beds;
depth of water layer up to 1.5 m is well tolerated by vegetables, grains, annuals and perennials (flowers), ornamental and fruit shrubs, trees on a dwarf rootstock;
if the groundwater is more than 2 m deep, fruit trees can be grown;
The optimal depth of groundwater for agriculture is from 3.5 m.

Is site drainage necessary?

Record your observations for at least some time. You yourself can understand how much drainage is needed.

Maybe it makes sense to simply redirect melt and sediment water along the bypass channel, rather than allowing it to flow through your site?

Perhaps it is necessary to design and equip a storm drain and improve the composition of the soil and this will be enough?

Or is it worth making a drainage system only for fruit and ornamental trees?

A specialist will give you the exact answer, and we strongly recommend calling him. But after reading this article, you will gain some awareness on this issue.

Upon completion of the technological and production tasks associated with the arrangement of a sewer system in an apartment building, industrial building, as well as in a private household, it is necessary to test the involved system using the forced flow method. This task is used to identify possible defects or improper installation of the entire involved sewerage part, and the test report for internal sewerage and drainage systems will be material evidence of the work on acceptance of the facility.

A visual inspection should be accompanied by inclusion in the test report of internal sewerage and drainage systems according to SNIP, which is currently represented by the current regulations of the “D” series appendix, which corresponds to SP 73.13330.2012 “Internal sanitary systems of a building”, recently a new one has been applied updated working edition according to SNiP 3.05.01-85.

Installation

Installing an Ariston water heater with your own hands is not difficult if you carefully read the instructions and follow its instructions. Of course, you can invite specialists who will do everything quickly and efficiently. The only “but” is the price of this service. For example, in Moscow it ranges from $100. Meanwhile, having minimal skills in working with plumbing, you can cope with this task in just 2-3 hours. Considering that you will spend some money on supplies, the net savings will be approximately $60.

Water heater connection diagram.

When assessing the pros and cons of installing a water heater with your own hands, take into account the risk of flooding your neighbors below; if something goes wrong, balance your strengths. The advantages of solving this problem yourself include:

saving time and money;
acquiring the skills you will need while operating the water heater.

Access to the storage water heater (boiler) must be absolutely free, and the wall for mounting must be strong, capable of supporting double weight (for a unit capacity of 50 liters, calculate the load of 100 kg). Determine the condition of your electrical wiring: is it capable of handling the significant additional load? For example, for a 2000 W water heater the copper wire cross-section should be 2.5 mm². Keep in mind that if there are old water pipes in the apartment, sometimes you have to first replace them and only then connect the boiler. Find out what amperage your electric meter is designed for. If it is less than 40 A, you will have to replace it too.

Main selection criteria

Thermal insulation material.
Control method.
What material is the tank made of?
Power consumption.
Duration and method of operation.
Availability of a protective system.
Quantity and quality of heating elements.
Water heating time and its maximum temperature.

The cost of a water heater depends on the following factors: manufacturer, tank volume, materials of manufacture, power, warranty, additional functions. Prices for electric boilers range from 5,000 to 10,000 rubles. As for gas water heaters, their cost ranges from 13,100 to 23,500 rubles.

Blitz tips

A few tips that will allow you to extend the life of the device without overpaying for electricity:

Do not unplug the device. Maintaining a set temperature takes much less energy than heating it up. This is especially true in winter, when the water temperature is especially low.
If hot water is needed less often than once a day, then it is better to turn off the device. In this case, heating will take less energy than maintaining the temperature.
Significant savings are achieved through controllers. The unit can be programmed to heat water at the desired time.
If possible, use the controller mode marked “E” (Eco).
Do not allow water to flow aimlessly. Once again, turning off the tap for a couple of minutes will save you a lot of energy and money.

By following these simple tips, you will not only extend the life of your boiler, but also significantly save on electricity.

Reviews

Maria Alexandrovna, Kaluga: We have two children in our family who need to be bathed regularly. Therefore, it was necessary to urgently resolve the issue of purchasing a water heater. We chose an 80-liter Ariston machine via the Internet. So far we have never regretted it. The device consumes 1.5 kW per hour. Heats water up to 75 degrees. The temperature stays for quite a while.

Evgeniy, Perm: I have a flat Ariston at home. I chose it for the toilet room. Fits perfectly. The lighting is so powerful that it illuminates the entire toilet. Now I save twice as much.

Oleg Eduardovich, Kirov: I am always at the dacha, so I decided to put the water heater there. I like the fast heating mode. I don’t save water; 80 liters is enough for almost all needs.

Mikhail, Yekaterinburg: I don’t know about other boiler manufacturers, but I definitely like Ariston. I bought Ariston ABS Velis Inox 80 in the spring, now it’s winter and no complaints. We couldn't be happier. Consumes little electricity. I would like to draw your attention - take stainless steel devices. 7 year warranty! Enough for the whole family to wash themselves and there is some left over for laundry.

Tishchenko Galina, Saransk: We needed a stylish, inexpensive compact model. Our choice fell on Ariston ABS VLS PW 80.

The model has an excellent design, glossy surface with silver details. Black control panel, blue backlit buttons. It is compact, flat, and fits perfectly into the bathroom.

Clear controls. The desired temperature can be easily adjusted. There is a fast heating mode. Over several years of operation, there were no complaints about the operation of the water heater.

Ariston water heater review (video)

To install wall-mounted models, the equipment is fixed using anchors or bolts. The optimal standard fastener diameter should be 10 mm or more. Installation of hundred-liter water heating tanks has some features. In this case, the fastening must be carried out with fixation on the other side of the wall. It is for this reason that experts recommend installing water heating devices before starting the main finishing work.

It is important to remember that when connecting different types of metals, it is mandatory to use dielectric adapters, through which differences in the degree of expansion of materials differing in parameters are compensated. The input must be connected using a standard valve, and a pipe is installed on the output

At the final stage, the installed water heater must be turned on and checked for correct connection, absence of leaks and operability.

During the operation of manufactured water heaters, difficulties do not arise, but it is necessary to take into account some rules that affect the durability of the device and its performance. Preventive measures are carried out periodically, including inspection of the internal parts of the equipment, descaling and replacement of heating elements that have become unusable. The average operating time of all mechanisms of a particular model can be found from the manufacturer's instructions. It must be remembered that timely replacement of the anode allows you to extend the service life of the water heating mechanism. In accordance with the recommendations of professionals, it is not advisable to set the thermostat to the maximum heating level.

Possible breakdowns

with an increased degree of reliability

According to the repair service employees, the most “popular” breakdown is the failure of the electronic display. There is no need to panic, nervously leafing through the instructions; this does not affect the overall operation of the water heater. Experts also recommend using not the maximum temperature, but within 60C.

Heating elements for Ariston 80 liter boilers need to be changed from time to time. No matter how powerful the anti-scale protection is, the quality of our water still does not improve. Therefore, after two to three years, your heating element will turn into a small pebble. If you do not open the water heater, you can determine the presence of this unpleasant feature by increasing the heating time.

The water heater instructions indicate the markings of frequently generated errors:

E2 – attempt to turn on the boiler with an empty tank;
E3 – the temperature sensor has become depressurized and a short circuit has occurred;
E4 – in case of heating water to 90C.

If you see any of the above on the water heater control panel, you need to contact a service center.

So, we looked at the main characteristics of one of the popular models represented by Ariston 80 liter water heaters. With proper use and compliance with all instructions, this reliable device will serve you for many years. And a wide network of official service centers will reduce discomfort to zero in the event of a breakdown.

Shuttle Ariston electric water heater: instructions for using boilers, diagram

After purchasing such an assistant as an Ariston 80-liter water heater for your home, the instructions should be the first document that should be carefully studied before you start using it. This will help you understand all the nuances of working with the boiler and extend the operating life of the device.

An Ariston 80 liter water heater is used to supply the house with hot water. Many positive characteristics contribute to the choice of this series of heaters.

The Ariston 80 v water heater has the same design and instructions for use as all models in this series. Installation should be carried out in accordance with the attached diagrams.

How to disassemble a boiler. Boiler cleaning

If your device begins to heat water slowly or stops heating altogether, the problem may be scale and it’s time to clean the heating element or replace it (if it’s burnt out). Fortunately, the design of these models easily allows you to get to the heating element and other insides of the tank.

Here's how it's done:

Turn off the device from the network (required);
Shut off the water supply;
Drain the water (for this we installed a tee with a valve above the valve);
We unscrew two screws and remove the protective box;
Use a wrench to unscrew the nut securing the flange;
Carefully remove the old heating element along with the anode;
We clean the tank and the heating element with the anode from scale (replace if necessary).
Reassemble in reverse order. If necessary, replace the gaskets.

As you can see, there is nothing complicated. We hang the device in place, fill it with water, turn it on, check it.

Price

The Ariston model range is very diverse. We also see a wide range in terms of the cost of devices. From economy class models to very comfortable ones. Let's look at several samples from the 80 liter line, but at different prices.

Let's start with the most modest:

Ariston SUPERLUX NTS 80V price 5,650 rubles. Tubular heating element, maximum temperature 75 degrees, power 1.5 kW number of heating elements - 1. Mechanical control, heating time 186 minutes. The inner coating is enamel. Maximum pressure up to 7 atmospheres.

Now let's look at a more expensive model:

Ariston ABS PRO ECO INOX PW 80V price 11,046 rubles. Temperature up to 80 degrees. Power 4 kW. Number of heating elements – 2. Electronic control (buttons). Internal covering – stainless steel. Protection against turning on without water and protection against overheating. Accelerated water heating.

As you can see, there is a difference. Let's look at an even more expensive model:

Ariston VELIS INOX 80 l price 22,990 rubles. The internal tank is made of stainless steel with special protection. Ultra-fast water heating. Protection against: electric shock, switching on without water, power surge, bacteria. Ultra-precise temperature control. Automatic error diagnosis. Improved magnesium anode. Electronic control. Polyurethane foam thermal insulation. Power 1.5 kW.

That's the difference. If any of the listed data is important to you, you can pay extra and buy yourself a more expensive device. If not, then a budget model will suit you just fine.

Installation and connection of the boiler

Installing a water heater is not particularly difficult. If you wish, you can do this yourself, but it is better to entrust this operation to a professional. If you decide to do it yourself, let's immediately discuss the issue of electricity.

Important: no extension cords with adapters. Single outlet only

If you can do it yourself, do it. No, call an electrician you know and run a separate line from the distribution panel. The socket must be located in a safe and dry place.

Step by step:

We decide on a location, drill holes for fastenings and hang the heater. It is better to do all this with the help of a level to avoid unnecessary distortions.
Next, you need to cut the tees into the distribution pipes. If they are metal-plastic or polypropylene, then there will be no problems with this. What to do when the pipes are metal? There are two options: either use a grinder and a screwdriver (thread cutting machine), or connect to a mixer.
We drilled holes, hung the apparatus, and cut tees with taps into the pipes. It is necessary to install a valve on the cold water supply in order to be able to shut off the water to the boiler.
We screw the valve to the cold water outlet (it should be included in the kit). Don’t forget to wrap flax or fum tape around the thread. The valve has a dual function. On the one hand, it discharges water at high pressure, on the other hand, in the event of a shutdown, it does not allow water to leak out of the device and thus leave the heating element dry (which is unacceptable).
It is advisable to install a tee with a tap above the valve to drain the water. This will make your life much easier if you decide to remove the unit one day. We screw American ones onto the valve and hot water outlet. Why them? The reason is the same. If you decide to remove the device for repair or replacement, you won’t have to worry about connections; American ones can be easily disassembled and assembled. We connect the connections from the pipes to the boiler.
The launch proceeds as follows. Without turning on the water heater, open the cold water supply. Don't forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors. We open hot water in the bathroom in order to release the air from the boiler. As soon as water flows confidently from the tap, you can turn on the water heater.

Now briefly about how to connect the device to the mixer. This is not difficult to do. You need to find a pair of tees that have external threads on both sides and internal threads on one. Carefully remove the mixer. We unscrew the eccentrics from their sockets. We screw in tees in their place.

The external threads in the middle should face up. We screw the valves onto them. We screw eccentrics into the internal thread and put on the mixer. We attach the water heater to the valves. The convenience of this option is that there is no need to make an insert. This method is used for metal wiring.

Don't forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors

Connecting the Ariston boiler

It is better if this work is carried out by specialists. The rules to follow when installing the device are given below:

It is necessary to inspect the safety valve, which should not have visible flaws. If they are present, then the damaged part should be replaced.
Plastic dowels are used to screw in screws.
Be sure to check all grounding elements.
An electric heater requires a separate power line to operate. The use of extension cords is strictly prohibited. The socket is placed in a damp place.
In operation, you must use the plug that came with the kit.

The Ariston 80 water heater performs the following functions:

On/off. After switching on, the entire system starts up, which is due to the indicators lighting up, and the temperature of the water in the boiler will be displayed. If the indicators are not displayed or flashing, this indicates that the system is disabled.
The Ariston abs vls 80 water heater has a power level adjustment function, which makes it possible to set the required parameters.
The Ariston abs vls pw 80 water heater allows you to use the antibacterial function, which can be activated or disabled by holding the “power” button for 5 seconds.
Possibility of adjusting the temperature using the “+” or “-” buttons in the range from 30° to 75°; The displayed indicators are not recorded. After switching on again, you need to set the values again. Standard temperature values are 75°, power – 1500 W.

Purpose of water heaters

A boiler is installed in a house to provide the home with hot water. The heater can be selected for 100 liters, 80 or smaller sizes. All Ariston models have the same internal structure, therefore the water heater connection diagram is used the same for this series of devices. It is better to invite a specialist to install the device. If you decide to do it yourself, the work should be carried out according to plan:

inspect the device from the outside;
prepare fasteners;
check grounding;
place the socket correctly.

Figure 4. Cleaning the heating element of the Ariston water heater.

When inspecting the device, you need to carefully check the safety valve. There should be no visible flaws on it. If they are found, the valve must be replaced. It is recommended to use plastic dowels and screws for them as fasteners. You need to connect a 100 liter heater or any other to a separate power supply line. The socket must be located in a dry place. The use of extension cords is prohibited.

Properly installed storage boilers start up immediately after they are plugged into the network. This is indicated by illuminated indicators. The temperature of the water inside the apparatus is also shown by thermometers.

Ariston water heater review (video)

At the final stage, the installed water heater must be turned on and checked for correct connection, absence of leaks and operability.

During the operation of manufactured water heaters, difficulties, as a rule, do not arise, but it is necessary to take into account some rules that affect the durability of the device and its performance. Preventive measures are carried out periodically, including inspection of the internal parts of the equipment, descaling and replacement of heating elements that have become unusable. The average operating time of all mechanisms of a particular model can be found from the manufacturer's instructions. It must be remembered that timely replacement of the anode allows you to extend the service life of the water heating mechanism. In accordance with the recommendations of professionals, it is not advisable to set the thermostat to the maximum heating level.

If you set the temperature limit approximately 10°C below the maximum values, you can significantly reduce electrical energy costs, as well as save resources on equipment parts

It is important to remember that you can only disassemble the device yourself as a last resort. Do-it-yourself repair work will exclude the possibility of exercising the right to warranty repairs.

Do-it-yourself Ariston boiler repair

Repair work related to eliminating breakdowns in gas appliances requires the involvement of qualified specialists, but repairs of an electric boiler can be done independently.

Major mechanical failures most often manifest themselves as leaking tanks, from which water begins to ooze or drip during operation. The cause of this problem may be corrosion in the weld areas or a malfunction of the reverse safety valve system, which is triggered and performs an emergency release. In this case, it is necessary to eliminate the excess water and air pressure using a reducer. Any depressurization of the storage tank will require the purchase of a new tank. If such a defect is minor, then it is enough to replace the sealing gasket.

A fairly inexpensive undertaking is to independently replace some electrical parts, including heating elements, bimetallic thermostats, sensors or switches. In case of prolonged heating, noise or hissing, as well as in the event of the shutdown protection of the ABS system, it is necessary to replace the heating element, the average service life of which does not exceed five years. Replacement is carried out after de-energizing the device, draining the water and removing the flange.

It is very important to systematically check the magnesium anode, which is a consumable material and is designed to effectively protect the inner surface of the tank and heating element from corrosive changes. When the anode thins by ½ of its original volume, a mandatory replacement is carried out

The heating element can last much longer if the so-called “dry” heating element is installed in the design.

Prevention measures

To prevent damage to the heating element, you need to:

disassemble the boiler and inspect the anode and heating element at least once every 6-9 months;
At each maintenance, rinse the tank from dirt and scale;
when replacing the heating element, also change the “sacrificial” element;
avoid mechanical methods of cleaning the tube, especially with a knife and other sharp objects;
tighten the nuts and bolts firmly, but without jerking, so as not to damage the threaded connections.

To slow down the formation of scale, you need to heat the water no higher than +60...+65°C. Once every 2-3 weeks, you can set the regulator to maximum mode to disinfect the tank.

Cold or insufficiently hot water flows from the boiler

The cause of a malfunction of this nature may be a breakdown of the heating element, thermostat and a large layer of scale on these devices. Before determining the cause of the malfunction of the Ariston 80-liter water heater and doing the repair yourself, you should turn off the power supply and drain the water.

Then, using a 13 mm wrench and a Phillips screwdriver, remove the protective box and unscrew the bolts on the mounting plate. Carefully remove the flange on which the heating element and thermostat are attached. Now you need to descale these 2 devices.

Boiler protective cover

The thermostat should be unscrewed, cleaning the attachment points to the flange from sediment, then carefully, using a screwdriver, free the thermostat from scale. You can check the functionality using a tester; the absence of a signal on its contacts indicates a malfunction and the need for replacement, since the thermostat cannot be repaired.

You can also check the heating element for functionality using a tester by connecting the ends of the tester to the contacts of the heating element. If there is voltage, the heating element is working, but it needs to be cleaned. The heating element can be cleaned using a screwdriver, carefully removing pieces of deposits.

Then you need to prepare a solution of citric acid - 100 g per 1 liter of water and immerse the heating element in the solution. The effect of the solution on the device will be indicated by air bubbles that appear as a result of the reaction. If this action is not enough for complete cleansing, you can put the vessel with the solution and heating element on low heat.

After cleaning the heating element, you need to descale the tank. Be careful not to damage the inner surface of the tank. If it is possible to remove the heater from the wall, cleaning can be done using a solution of citric acid, pouring it into the tank.

There may be a lot of debris in the tank

After these manipulations, assemble all the parts in the order in which they were disassembled and carefully insert and secure the flange. Make sure that during assembly there are no distortions of parts, do not overtighten the bolts, change the gasket between the body of your storage boiler and the flange, since the flange gasket was also exposed to salts.

Mandatory Precautions

Any purchased equipment comes with instructions for proper operation of the gas water heater. The principle of operation of most of them is identical to that stated above, but here the red line should be highlighted by mandatory compliance with safety precautions.

It is necessary to carry out preventive cleaning of the gas water heater in order to avoid disruption of the efficiency of its operation (you can read how to do this in the document that comes with the gas water heater - instructions).
It is important to check the condition of the chimney ducts - this will help avoid blockages.
If the device fails, you should immediately contact the gas service. Trying to fix the problem yourself is prohibited.

The activation of the unit is shown in more detail in the video:

It is enough to understand once how to light the device to ensure comfortable and instant heating of running water. And then you can simply enjoy the operation of this convenient heater.

Rules for using the device

You can use the storage type device immediately after the first start. To do this, you need to turn it on and select the operating mode. Throughout operation you will have to follow some rules. They will help increase the service life of the boiler.

Before turning on, check the presence of water in the tank. This will prevent the heating elements from failing.
It is recommended to install a filter on the pipe supplying water to the boiler. It will protect against dirt and reduce water hardness.
During the year, descale the drive at least once.
Periodically monitor the performance of the protective anode, change if necessary.

Read how to choose pipes for water supply in a private house.

PVC pipes and fittings for water supply are the key to quality water in the house, read about the benefits.

To make the water tastier and healthier, take care of filters for your private home, read about it at https://klimatlab.com/vodosnabzhenie/filtraciya/filtry-dlya-ochistki-vodyv-chastnii-dom.html

Flow-type devices require compliance with several other rules.

Check the water pressure before turning on the power. A weak stream will not allow the device to function normally.
If the temperature is uncomfortable, adjust it using the buttons on the body or by rotating the mixer tap.
If the heater is installed in a bathroom, provide splash protection.
Hot water is no longer needed - be sure to turn off the device.

Both devices are not recommended for installation in rooms where temperatures may drop below zero. This will cause the water inside the device to freeze and cause it to break.

Equipment reliability depends not only on product quality. Also important: correct installation, switching on and use of equipment. Compliance with the recommendations given in the article will significantly increase the uninterrupted operation of the boiler.

Rules for operating a water heater

Extending the life of an Ariston brand storage heater is not difficult; you just need to install it according to the instructions and strictly follow the rules for operating the device :

The presence of water in the boiler should be checked every time the device is turned on and off. Switching on is possible only when the tank is filled with water.
If the power cord is damaged, it must be replaced with material of the same brand, which is best purchased at a specialized retail outlet.
If the heater will not be used for a long period, especially in the cold season, then the water from the boiler must be drained, following all the rules prescribed in the instructions. After this, the cold water supply tap is closed. After these steps are completed, the heater is disconnected from the electricity supply.
Over time, the heater requires cleaning from dirt. To carry out this work, it is better to use the services of specialists.

We advise Installing and replacing a mixer: types of devices and installation recommendations

We carry out dismantling

Every owner of Ariston water heaters should know that when replacing the thermostat, relay and safety valve, dismantling the tank is not required. Draining the water and completely disassembling the boiler is carried out only during maintenance work and when replacing a burnt-out heating element.

Disassembly of the product is divided into standard stages:

Disconnect the water heater from the home electrical network.
Drain the water from the tank.
Remove the flanges and gain access to the inside of the water heater.

Before disassembling the product, you need to make sure that it is disconnected from the network: if the heater is powered by a separate line, then you need to turn off the circuit breaker, but if it’s just through a cord, then simply pull out the plug from the socket.

Some readers may wonder: why emphasize these points so often? But statistics say that during home repairs or when replacing burnt out parts, very often craftsmen who neglect safety precautions receive electrical injuries of varying severity.

Only after turning off the power can you begin dismantling the Ariston boiler with your own hands:

unscrew the cover, which is secured with screws; before starting dismantling, take a photo of the location so as not to confuse anything during assembly; disconnect the three-wire cable, the first two wires - phase and neutral were connected to the thermostat, so you can carefully remove it.

All electrical work has been successfully completed, and you can begin draining the water from the tank.

Removing water

If the initial installation of the water heater was carried out by a service technician, then he had to install a special tee with a drain tap and screw a fitting into it. Quite a convenient device - the user easily connects the hose, as shown in the photo, and drains the water into the bathroom. In the absence of a special device, water is removed by connecting a hose directly to the nozzle of the product.

Draining the water can take several minutes if the heater capacity is up to 50 liters, and when you have an 80-liter Ariston, the wait will last up to 30 minutes or more.

Hose with fitting

Opening access inside

All modifications of products under the Ariston brand have an oval flange on which heaters, a magnesium anode and a tube with a thermostat inside are installed. An elastic rubber gasket is placed on the flange body from below to ensure tightness. The flange is secured with a U-shaped strip, which is secured with a nut.

We unscrew the nut, carefully push the flange in, turn it and pull it out. Next, the failed parts are replaced and the surfaces are cleaned of salt and lime deposits.

Remove excess debris at the bottom of the tank, visually inspect the rubber seal, if everything is in order, then do not change it - it is very expensive, and it is very difficult to get a new one. Dismantling and subsequent assembly can be done independently by any user without special training. We attach this video to help:

The operation statistics of similar heaters allows us to conclude: regular inspections of the wear of the magnesium anode, cleaning of the heating elements, and preventive maintenance of the internal coating of the tank must be done regularly and by doing this you will significantly extend the service life of the product.

The lineup

Flat boiler Ariston

The range of water heaters is quite huge and is constantly being updated. They are very compact, although they have a large displacement. For a family of four, an 80-liter capacity is ideal.

Square tanks with mechanical controls are very common. The only drawback is the unimproved fastening mechanism.

There are also models with a maximum capacity of 100 liters. Such units are capable of providing industrial shower rooms. The insulating layer of such models is made of polyurethane foam.

The Ariston range of water heaters can have both an advanced electronics system and a simple control mechanism. The warranty on bulk tanks is given on average for seven years. For additional fastening of boilers, special metal frames are made.

Models and displacement

Due to the popularity of the product, the manufacturer produces a large number of models with different characteristics. Models with electric heating elements differ in volume and the presence of a storage tank, power, and water temperature limit. The higher the power of the heating element, the higher the maximum heating temperature.

There are also differences in dimensions, weight and installation methods (vertical, horizontal).

The list below shows the most popular Ariston brand water heater models on the market and its brief characteristics:

ABS VLS (VELIS) EVO PW 50 – electric storage water heater. Volume - 50 l, equipped with a fast heating function, an electronic thermometer for monitoring the water temperature, and a safety device to prevent it from being turned on if the storage tank is empty.
NTS 80V 1.5K SU 3700366 – electric storage water heater. Volume - 80 l. Equipped with an external temperature regulator in the form of a round scale.
ABS VLS EVO INOX PW 80 D - electric storage water heater. Volume - 80 l. The tank consists of 2 40-liter compartments. Has the ability to accelerate heating, there are 2 heating elements.
ABS PRO R 100 V - electric storage water heater. Volume - 100 l. The model is equipped with overheating protection (ABS safety system). Energy savings are ensured by polyurethane foam thermal insulation. Vertical installation is provided.
ABS ANDRIS LUX 30 - electric storage water heater. Volume - 30 l. The model has a bottom connection for water pipes. The tank is made of steel, the internal coating is Ag+.

Typical boiler diagram Ariston 50

Components for electric storage water heater Ariston. Ariston electric storage water heater consists of:

outer body;
bracket;
internal tank;
hot water outlet;
magnesium anode;
cold water inlet;
heat insulator;
thermostat sleeves;
heating element (heater);
flange;
thermostat;
power cable;
regulator knobs.

Design of ARISTON water heaters for 80 liters

The external simplicity of any water heater carries with it the same uncomplicated internal structure. The difference can only be observed in the external design and materials from which the heater is made. The external structure of the body can be made in a cylindrical or flat shape.

Any water heater has:

The internal tank is a boiler into which cold water flows. It is framed by an outer casing.
The water that enters the tank is heated by a built-in heating element . To heat water faster, the boiler may have two heating elements.

Thermal insulation layer , which is present between the body and the boiler, performs the function of a thermos, which allows you to maintain the water temperature longer.
Water enters the tank through a shortened pipe with a divider . The heated water is supplied by the outlet pipe.
Magnesium anode built into the Ariston 80 water heater prevents the deposition of mineral salts on the walls of the inside of the tank. This element is replaced as needed.

During heating, when the set temperature is reached, the thermostat , which automatically interrupts the power circuit.
If the heating element is turned on and the water temperature drops below the set values, then the configured thermal relay .
The voltage indicator (indicator light) allows you to control the operation of the water heater
The built-in thermometer makes it possible to monitor changes in temperature.

The Ariston 80 storage water heater, which belongs to the flat horizontal models, has the same typical internal structure.

We recommend a coarse water filter: types and installation methods