TOP 10 best fireplace stoves for long-burning summer cottages: 2020-2021 rating of cast iron wood-burning models and description of their parameters

Summer residents spend almost half of their lives on their plots, going to their apartments only when the “white flies” fly. In country houses, as a rule, there is no heating system, and it is not needed in the summer months. And in early spring, autumn and during winter forays into nature, the living space will be heated by a long-burning fireplace. In addition to warmth, such a stove with a window will give moments of aesthetic pleasure. Looking at the fire is one of the best ways to relax. In addition, the flickering flame petals in the fireplace create a romantic mood.

The editors of the Yanashla website bring to your attention a review of high-quality long-burning stoves and fireplaces for 2022 and instructions on how to choose a good model.

Long-burning fireplace stoves: operating principle and differences from conventional stoves

Anyone who hasn't skipped school knows that the rate at which fuel burns directly depends on exposure to oxygen. A lot of oxygen means the fuel burns cheerfully and quickly; too little oxygen means the combustion process slows down and smoldering begins. In this case, pyrolysis gases are formed, which, when burned, become a source of thermal energy, and in large quantities. The heating system has a special chamber with two compartments. In the first, lower one, fuel burns. In the second, upper one, gases are collected, and afterburning takes place here.

Thus, using a slow-burning fireplace with high efficiency to heat a room, it is enough to load the firebox once to enjoy the warmth in the room for at least six, or even up to eighteen, hours. In this case, little soot is formed, for which housewives are especially grateful to the manufacturers. A conventional oven cannot boast of such qualities.

Features of operation

Following a few simple rules will significantly increase the productivity and efficiency of your fireplace stove.

• When stacking firewood, do not compact the logs tightly; this will ensure a more intense air flow. You need to fill 1/3 of the combustion chamber with fuel.
• To prevent smoke, when replenishing the supply of firewood in the firebox, it is advisable to pull out the ash pan damper and open the door gradually.
• To avoid burns, the combustion chamber door should be opened using special tools.

In addition, given the close proximity of coals and open fire, it is necessary to take special care when adding firewood and strictly follow fire safety rules.

What types of long-burning fireplaces are there?

The modern market has a wide range of stoves and fireplaces. The following types of stoves and fireplaces are presented:

• Wall model.

This design is also called linear. It has a straight rear vertical surface. Installed near the wall.

• Corner fireplace.

Installation in the corner of the room is possible if the walls are equipped with fireproof protection.

• Triangular model.

The back surface is made of metal or alloy, the three-sided front is made of tempered glass. Installation of such a heating device is against the wall.

• Built-in design.

It has an interesting design: the facade is also made of all-glass surfaces, allowing you to admire the play of flames, but the “backdrop” is hidden from view.

Heat exchanger - what is it?

In general, stoves are quite similar to traditional fireplaces, but there is still one very important difference - a special heat exchanger in which ordinary water or other working fluid is heated.

It is worth noting that two types of heat exchanger can be used in the design:

• An ordinary water tank, which is located in close proximity to the firebox.
• In the form of a water jacket, which is laid around the entire perimeter of the device.

There are many models with a heat exchanger on the modern market. All of them differ in power, design features and external characteristics.

So, from the presented assortment we can highlight those models that are especially popular among consumers.

The main rules in choosing a long-burning device

How to purchase the right product and not make mistakes? When choosing such a heating device, you should pay attention, first of all, to its characteristics. The information always indicates power, efficiency, and device parameters.

The selection criteria also include:

• Ease of use and cleaning. It is better to purchase a model with a collapsible chimney.
• Creation of tightness. If the structure has an ash box, it should slide in tightly, preventing air from penetrating inside; the presence of adjustable dampers; doors with seals that prevent air from escaping; presence of gate.
• The material from which the body is made. The thickness of the alloy/metal is the key to long-term cooling of the furnace. In addition, this increases the service life. Budget models are made from steel, they do not “live” for a long time. Higher quality structures are made from structural steel, stainless steel, and ceramics. The best and most durable when used correctly are cast iron heating systems.
• Design. Modern models fit perfectly into the interior. In addition, stoves and fireplaces with a hob are used not only for heating the home, but also for cooking. Their functionality has been significantly expanded.
• How much does fuel cost? This depends on the availability of fuel. Wood resources are much more profitable if there are wood processing enterprises near your place of residence.
• How much does a fireplace stove weigh? Even a small cast iron fireplace is very heavy. The area where it will be placed must be strong, otherwise the fireplace will fail. The advantage of steel structures is their relatively low weight.
• How long does it take for the oven to heat up? For summer residents who visit the hacienda only on weekends, it makes sense to purchase a steel device, it heats up faster.
• What kind of heat exchanger? A system with a water circuit and a collector can provide warmth not to one room, but to several.

The most popular models on the domestic market are stoves-fireplaces of Italian, Polish, Serbian, Norwegian and Russian production.

Wood-burning cast iron stoves for summer cottages - advantages and disadvantages

Advantages:

• They can be very miniature.
• Cast iron resists burning and destruction from caustic gases longer than steel.
• Thick walls accumulate heat and continue to release it to the room, even when the combustion process stops.
• It withstands periods of winter downtime.
• A simple short-burning stove can “digest” everything that burns, ridding the area of ​​debris, dead wood and rubbish.
• Cast walls are reliable, durable, and do not deform.
• The functionality of heating and cooking models replaces several appliances, thereby saving the owner’s money and space in the house.
• They have a modern, attractive design and will be able to decorate the rustic style of the house.

Wood heating stove made of cast iron

Disadvantages of cast iron:

• It has considerable weight, which makes installation and transportation of heating equipment difficult.
• Thick cast iron walls take a little longer to warm up than steel ones (although, as already mentioned, this significantly extends their service life).
• Fragility is the weak point of such units. They need to be very carefully delivered and installed in place.
• The material is sensitive to sudden temperature changes. Situations such as cold water getting on a hot surface should not be allowed - cracks may appear.
• The need for installation on a reliable foundation. Actually, this is a mandatory requirement for any heating device. The foundation for the cast iron version is made simpler than for brick buildings, but more serious than for light steel.

What to pay attention to when operating a long-burning stove-fireplace

Each product has instructions, which provide not only a description and characteristics, but also recommendations: how to apply, how to use the device. By following them, you can extend the life of the heating device and ensure fire safety at home.

These are the tips:

• Before installation, you should make sure that there is enough free space around the device and that there is no contact with other interior items.
• Before using the fireplace, it is necessary to equip its location with protection against possible fire.
• The pipes are installed in the direction in which the gases generated as a result of combustion follow.
• Only solid fuel is used.

Guca Lava (Gucha Lava) – power and refined appearance

Guca Lava wood heating stove-fireplace with heat exchanger, made of high-quality cast iron and designed for large rooms.

Its stylish and at the same time original design attracts buyers. However, the beautiful shape and power of the stove are not all the positive characteristics that a model of this type has.

Main distinctive features:

• The most powerful model in the entire manufacturer's line. It is capable of heating a room up to 220 m3.
• The body is not lined; heat is transferred into the room through fire-resistant glass and cast parts of the structure. Efficiency – 78%.
• The model is equipped with a primary and secondary air regulator - this allows you to control the combustion intensity.
• Clean glass system.
• The Gucha Lava stove with a heat exchanger can only be used by connecting it to a hot water supply system.
• Weight – 161 kg.
• The direction of the chimney is vertical or horizontal.
• Dimensions – 540x493x946mm.
• Cost – 42,700 rubles.
• Manufacturer – Serbia.

Guca Lava is equipped with a volumetric combustion chamber and large glass, which allows you to enjoy the effect of fire.

How to make a fireplace stove for your summer house with your own hands

If you have the skill to work with your hands and the ability to work with your hands, then installing a heating device will not be difficult.

However, before carrying out work, you need to make sure that:

• during the construction of the house, space was allocated for the chimney;
• there are no flammable objects near the place where the fireplace will be installed;
• the floor is reinforced and covered with metal plates;
• the surface of the wall is covered with fire protection; for this purpose, a layer of basalt cardboard can be used, and either a magnesite or a cement-fiber board will go on top. The very last layer is made of heat-resistant tiles. If an island model is assumed, then the wall can be left as is, without a protective screen.
• the necessary equipment has been purchased.

Step-by-step instructions: how to install a long-burning fireplace

1. When treating the area with fire-fighting materials, mark and cut a hole for the chimney.
2. Make a box that will cover the pipe opening. Thermal insulation material Superizol and fiber cement board Minerite are used. The size is calculated based on the diameter of the chimney.
3. Install the box.
4. Insert a chimney into it.
5. The space between the walls of the box and the pipe is filled with basalt wool.
6. Cover the hole with a metal apron.
7. Place the underfloor sheet on the floor; you can’t do without it if you purchased a floor-standing model.
8. Place the oven on this metal plate.
9. Rub all seams. For this you need heat-resistant grout. You can buy it at a hardware store, or you can make it yourself. At home, dilute plaster, dye and a special liquid to make the mass water-resistant to the consistency of thick sour cream. Grout is also made from one part cement and five parts clay, diluted with water.
10. Check the correct installation using a building level.
11. Conduct a furnace heating test.

All work can be done independently if you are confident in your abilities, or you can resort to the help of specialists. The experience of knowledgeable professionals is also useful when repairing fireplace stoves, since an amateur can make a mistake that will be costly.

Stove Bavaria Wall-Corner

Bavaria is an ideal solution for installation in rooms with a small area.

A special feature of the model is that it is equipped with a built-in heat exchanger, which allows you to organize a heating system in the house.

Main characteristics:

• Power – 12 kW.
• The maximum area of ​​the heated room is 150 m3.
• Efficiency – 78%.
• The volume of the heat exchanger chamber is 4 liters.
• The system is pure glass. While the fireplace is operating, the door glass does not pump up.
• Stove with lining.
• There is a fuel saving mode.
• There is a niche for firewood.
• Equipment weight – 170 kg.
• The chimney outlet is located on the rear wall.
• Dimensions – 945x540x710mm.
• Firebox type – wall-corner.
• Cost – 25,500 rubles.
• Country of origin: Russia.

The best manufacturers and brands

Among the enterprises that produce high-quality products that are in demand among buyers, the following companies occupy the strongest positions in the market.

• EcoFireplace

Domestic manufacturer. On the market for more than fifteen years. According to buyers, the products are not only of high quality, but also have an aesthetically pleasing appearance. It is on these factors that the popularity of the Bavaria series models rests.

• Fireway

A Russian company specializing in the production of cast iron fireplace stoves. Exists since 2008. The advantage of the products is their compactness, but at the same time power. For example, the famous GUNTER is “omnivorous” - it runs on wood or compressed fuel - and is capable of heating a room of more than 100 square meters.

• Jotul

The history of this Norwegian brand began more than 150 years ago. The products of this company are known all over the world. The range is wide - from small models with power from 7 kW to more serious long-burning fireplaces. Engineering innovations with the function of secondary fuel afterburning and self-cleaning of the fireplace window immediately gained popularity. Product warranty is of no small importance. Jotul provides a warranty period of up to 10 years.

• Tim System

Serbian company. Metal stoves from this manufacturer deserve favorable customer reviews. High-quality material, stylish design, complementing the heating device with auxiliary elements, for example, a hob, a box for storing firewood - that’s what Tim Sistem products are.

• Guca

Another Serbian concern. Exists since 1958. The company with high-tech equipment is considered one of the leaders in Europe. One of Guca's principles is to keep up with the times and constantly introduce innovations.

• La Nordica

Italian brand. On the market for over 50 years. According to the manufacturer, the principles of operation are economy, efficiency and respect for the environment.

• META

Trademark of a Russian manufacturer. META Group has been on the market for more than twenty years. Its specialization is the design and production of fireplaces, fireplace stoves and fireplace inserts. Domestic buyers note such advantages of products as high quality and budget prices.

• Kaw-Met

Polish company. Exists since 1981. In Eastern Europe it is one of the best manufacturers of cast iron fireplaces and stoves. A distinctive feature of Kaw-Met designs is a built-in gate valve with a lock. The company's products are in demand among customers.

• TMF

Domestic company located in Siberia. As the designers of the enterprise say, “the natural ingenuity and engineering experience of Siberians are worthy of recognition as international professional standards.”

• Thorma

Slovak company with a hundred-year history and a good reputation. Typically, cast iron products are “clad” in ceramics. This provides fireplaces and stoves with durability and gives them a special charm. The structures weigh little, so their installation does not require additional work to strengthen the foundation.

• Brandenburg

Brand of the Ural Furnace Equipment Plant. The company offers for sale more than 100 assortment items. The goods are inexpensive, but high quality, so they have found their buyer.

Review of popular models

Many companies that manufacture space heating equipment have earned a certain degree of trust among the consumer audience. This was facilitated by some qualities of the products presented: cost, efficiency, external design. Their names are considered branded, although this does not mean that there is no alternative, just that a buyer who cannot appreciate the quality of the products offered may rely on brands.

Stylish solution for heating your home

A list of the best brands, according to consumers, can be compiled based on statistical data from any seller.

• Some manufacturers have their own unique feature. Thus, the company Eurokom (Poland), which presents “Ambra” stoves, attracts attention with the vintage design of the stove facade. It imitates stucco, and the openwork pattern provides sufficient visibility of the combustion chamber.
• The Canadian company Vermont Castings, after merging with American manufacturers, is ready to provide a range of colors for cast iron stoves. It is known that the paint must be special, so rarely does anyone take on this type of decor. As for technical characteristics, Vermont rightfully occupies a leading position. A wide range of capacities, a universal firebox that is suitable for using wood and coal, a system for maintaining a constant temperature - all these characteristics are inherent in each model of the company.
• The original design in the form of chasing on the body of the Castelno stove is a distinctive feature of the Irish stove. In the relatively small size of the case it was possible to hide a device that develops power up to 14 kW. This indicator promotes the use of Castelno stoves in large rooms.
• Our Bavaria stove from the Ecofireplace company occupies a confident position in the list of leaders. This model has a number of advantages: it is light and compact, but contains a hob. The finishing of the side walls with tiles stylizes the device and determines its place in a specific design. The company presents corner and wall models, which differ only in the installation method.

https://youtube.com/watch?v=YC3QypqiOts

Before choosing a specific model, you need to compare its characteristics with your heat needs. Each kilowatt of power of a cast-iron fireplace stove is capable of efficiently heating 10 m2 of area.

Rating of high-quality long-burning fireplaces

The editors of the Yanashla website invite you to familiarize yourself with the list of the best models for 2022, compiled taking into account the opinions of domestic buyers.

Top 5 fireplaces in the price segment up to 50 thousand rubles

Inexpensive models are represented by the brands Meta, EcoKamin, Brandenburg, THORMA.

5th place: EcoFireplace Bavaria

Average price: 45 thousand rubles.

Wood-burning fireplace stove with a panel for cooking, including a wood compartment and an ash pan. It heats up quickly and creates a warm, comfortable atmosphere in the room, so it is convenient for country houses.

EcoFireplace Bavaria

Advantages:

• High-quality heating;
• Good functionality.

Flaws:

• The top panel takes a long time to heat up;
• Soot.

4th place: Wood-burning stove-fireplace META Varta

You can buy it for 28,400 rubles.

Steel model with ceramic finish. The set includes a chimney, an ashpit and a woodshed for storing logs. The fuel burns for six hours.

Wood-burning stove-fireplace META Varta

Advantages:

• Good equipment;
• Inexpensive;
• Fast warm-up.

Flaws:

• Not too powerful.

3rd position: Brandenburg with hob 2018

Average price: 21 thousand rubles.

Floor-standing wood-burning model with a power of 8 kW made of steel in a ceramic “shell”. Heated volume – 120 cubic meters. Equipped with a fuel afterburning system.

Brandenburg with hob 2018

Advantages:

• With hob;
• Practicality;
• Heats well;
• High quality manufacturing.

Flaws:

• Cramped firebox and ash pit.

2nd place: META PECHORA

Average price: 38,380 rubles.

The model in a ceramic “shell” is equipped with engineering systems such as fire level adjustment and secondary combustion. In addition, housewives appreciate Pechora because it does not require cleaning the glass window after each fire.

META PECHORA

Advantages:

• Beautiful panoramic view;
• Good functionality.

Flaws:

• The firebox is narrow.

1st place: Milano II

Sold at an average price of 46,170 rubles.

Steel model from the manufacturer THORMA with a hob, ash pan and chimney, burning wood. The design has a power of 5 kW and is capable of heating a room of 124 cubic meters.

Milano II THORMA

Advantages:

• Good functionality;
• Additional accessories;
• Tightness;
• Easy to install.

Flaws:

• Not noticed.

Rating of fireplaces priced over 50 thousand rubles

The eight best offers from manufacturers are represented by the following products.

8th place: Guca Lava

Floor-standing model with a power of 12 kW. A cast iron stove will provide warmth to a room of 240 cubic meters. Wood fuel is used.

Guca Lava

Pros:

• Convenient design;
• Good traction;
• Eight hours of heat;
• Long service life.

Minuses:

• The door is self-closing;
• Inconvenient design of the ash compartment.

7th position: TMF Vizier

You can buy it for 52 thousand rubles.

The hearth is semicircular in shape. Fireplace stove with a power of 8 kW. It runs on wood fuel and will warm rooms of 130 cubic meters. m. With clean glass function.

Vizier's TMF

Pros:

• High-quality material and workmanship;
• Elegant appearance;
• Retains heat for a long time;
• Convenient air flow adjustment.

Minuses:

• Soot on the glass.

6th place: Kaw-Met P10

Costs 51 thousand rubles.

Floor-standing fireplace with a power of 10 kW with a cast iron body. Equipped with a box for collecting ash. The fuel burns for a couple of hours, and then simmers for another four hours. Convenient heating device for a summer house.

Kaw-Met P10

Advantages:

• Good equipment;
• High heat dissipation.

Flaws:

• The glass is smoked through several fireboxes.

5th position: Guca Mercury

Sold at a price of 52,000 rubles.

Product from a trusted brand. Buyers about the stove can work with both wood and briquettes. Housewives love the design. In addition, it is convenient to prepare food.

Guca Mercury

Advantages:

• Power;
• There is an air supply adjustment.

Flaws:

• After some time of use, the glass fasteners on the door become loose.

4th place: META ANGARA 12 AQUA

Sold at a price of around 54 thousand rubles.

Wood-burning fireplace stove with a power of 16 kW, powered by wood fuel. With 10 liter heat exchanger. The package includes an ash pan.

META ANGARA 12 AQUA

Advantages:

• Heats well;
• Powerful;
• Durable material;
• Good functionality.

Flaws:

• Not detected.

"Bronze": JOTUL F 8 TD BP

Sold at a price of 95 thousand rubles.

A classic cast iron model that will serve for many years. The fireplace stove can provide heat up to 300 cubic meters; a load of firewood lasts for eight hours. Usually owners complain that large logs do not fit into the firebox. The invention of Polish designers loves large sizes; firewood up to 50 centimeters in length can be used.

JOTUL F 8 TD BP

Advantages:

• Quality goods;
• Good heating;
• 10 year warranty;
• Economy.

Flaws:

• Without ash drawer.

"Silver": La Nordica Super Max

It costs a little more than 64 thousand rubles.

Vertical steel fireplace stove with a firebox and top panel made of cast iron. Power – 6 kW. Quite compact and not too heavy - weighing 75 kilograms - the design will appeal to summer residents. For convenience, it is equipped with a cooking panel and a drawer for collecting ash.

La Nordica Super Max

Advantages:

• High-quality durable materials;
• Compact size;
• Modern design;
• Ergonomics.

Minuses:

• Inconvenient ash pit.

Popular vote

Which stove-fireplace would you choose or recommend?

Vermont Castings DutchWest XL

8.33 % ( 2 )

Ardenfire Corsica 12

0.00 % ( 0 )

Kratki Koza/K6

8.33 % ( 2 )

Marseille 10

4.17 % ( 1 )

Brandenburg with cast iron stove

4.17 % ( 1 )

Angara-12

20.83 % ( 5 )

La Nordica Isetta con Cerchi Evo

4.17 % ( 1 )

Vesuvi PC-01 (205)

16.67 % ( 4 )

Eurokom Lotos 17 WT

8.33 % ( 2 )

La Nordica TermoNicoletta DSA

16.67 % ( 4 )

MBS Thermo Vesta

0.00 % ( 0 )

Angara Aqua

4.17 % ( 1 )

MBS Corner

0.00 % ( 0 )

Brandeburg

4.17 % ( 1 )

Baikal 8 Aqua Meta - ideal for a country house

The fireplace stove has an original design that provides fast and efficient heating of the coolant. The model has a large combustion chamber and impressive glass, which allows you to observe the effect of fire.

Main characteristics:

• Thermal power – 11 kW.
• Water circuit.
• Heat exchanger volume – 5 l.
• Material – high quality steel.
• Heat-resistant large glass.
• Quick heating of the air - up to 10 minutes.
• Efficiency – 70%.
• Operating hours: 8 hours.
• The volume of the heated room is 230 m3.
• There is a special niche for firewood.
• Dimensions: 570x990x400mm.
• Weight – 110 kg.
• Coolant volume – from 40 to 130 liters.
• The type of fuel used is firewood and briquettes.
• Cost – 27,000 rubles.
• Manufacturer – Russia.

The Baikal 8 fireplace stove has a stylish and original design. The high level of efficiency and efficiency make this model very popular in the modern market.

Bavaria Prismatic with viewing window

The Bavaria Prismatic fireplace stove is perhaps the most elegant and beautiful model from the entire range presented by this company.

Large prismatic glass offers a luxurious view of live fire. The sophistication of the fireplace is given by the colored ceramics used on the side of the structure.

Also among the positive characteristics is the economical consumption of resources, which allows the fireplace to operate for about 10 hours with one load of the firebox. In addition, in the oven, in its upper part there is a cooking surface.

Main characteristics:

• Thermal power – 12 kW.
• Efficiency – 78%.
• The maximum heated area is 190 m3.
• Weight – 170 kg.
• Heat-resistant prismatic glass.
• Operating hours: 10 hours.
• Dimensions: 945x710x540mm.
• Cooktop with two burners.
• Cost – 35,500 rubles.
• Manufacturer – Russia.

The Bavaria Prismatic fireplace stove with a heat exchanger is one of the most popular models of this company.

Many consumers prefer this fireplace, as it ideally combines the concept of price and quality.

Thermofor Angara with a heat exchanger for saunas and baths

The Termofor Angara stove-heater with a built-in heat exchanger is a modern model of a heater for heating a sauna. Under the body there is a water circuit that is connected to a tank with a capacity of up to 110 liters.

The stove of this model is capable of not only heating the steam room, but also water for household needs.

A water tank can be installed in an adjacent room and water, circulating from the circuit, will heat the liquid in the tank.

The key feature of the model is that it is equipped with a remote part. An external flow channel allows you to load firewood from the adjacent room adjacent to the sauna.

In addition, the external part of the model is made in such a way that allows you to observe the effect of fire. Today, heaters of this type are perhaps the most attractive and effective.

Key features of the model:

• The heated area of ​​the steam room is 18 m3.
• Material – steel.
• Combustion chamber volume – 42 l.
• The weight of the stones is 35 kg.
• The weight of the heater is 65 kg.
• Dimensions: 850x500x900mm.
• Heat-resistant glass - 17 inches.
• Cost – 22,500 rubles.
• Manufacturer – Russia.

Termofor Fire-Battery 5 with original design

The main difference of this model is its computer modeling, thanks to which an ideal price-quality ratio has been achieved.

In addition, the Fire-Battery 5 s stove has burners of different diameters, allowing you to cook food over an open fire.

The design is also equipped with a heat exchanger and has a remote tank, so you can heat water for your needs.

Main characteristics:

• The volume of the heated room is 100 m3.
• Power – 6 kW.
• Efficiency – 85%.
• Tank volume 1.3.
• Dimensions: 370x555x760.
• Weight with tank – 42 kg.
• Clean glass system.
• Cost – 13,000 rubles.
• Manufacturer – Russia.

The model is devoid of all frills, so its price is quite reasonable.

The Fire-Battery 5 stove is an effective and at the same time stylish design that can be installed in any room of the house.

Its original appearance, reminiscent of a battery, makes this model distinctive from all its counterparts.

Some installation recommendations

Installing a long-burning stove does not cause any particular difficulties. For proper installation, just follow simple rules:

• Use a refractory sheet as a “substrate” for the oven. It is important that the edges of the sheet extend beyond the stove, creating a “mat” in front of the firebox.
• Do not install the structure close to walls. The optimal distance between the stove and the wall is about 20 cm . this will ensure a uniform flow of air and prevent heating of the wall surface.
• To ensure sufficient draft force and prevent blockages in the chimney, its cross-section must be at least 15 cm .
• The chimney must be installed while maintaining access to it. It is best to make a collapsible chimney - this will make cleaning the chimney easier.
• It is best to install the chimney against the movement of gases. This will protect the floor from condensation that settles on the walls of the pipe.

MBS Thermo Magnum Stone (MBS Thermo Magnum Stone)

The Thermo Magnum Stone stove is one of the most powerful models on the market today. The key feature of this model is the presence of an oven in which you can make baked goods.

The oven also has a hob. Thermo Magnum Stone is ideal for a country house.

Design features:

• Material: cast iron and high quality steel.
• The oven contains a baking tray and a temperature control regulator.
• The heat exchanger is a coil, with a power of 8.5 kW and a volume of 11 liters.
• High-quality glass ceramics allow you to observe the combustion process.
• Power – 12 kW and 8.5 kW (heat exchanger).
• The area of ​​the heated room is 410 m3.
• Efficiency – 89%.
• Type of fuel – firewood, briquettes.
• Dimensions – 850x1070x655mm.
• Weight – 206 kg.
• Afterburning system.
• Cost – 66,000 rubles.
• Manufacturer – Russia.

Attractive design, efficiency and functionality – these are the distinctive qualities of the Thermo Magnum Stone stove.

ABX Stockholm 8 with heat exchanger

The ABX Stockholm fireplace stove with a built-in heat exchanger is capable of heating not only the fireplace room, but also other adjacent rooms.

The model has a special niche at the top in which you can heat food. At the bottom of the structure there is a place for storing firewood.

The stove is made of high-quality sheet steel and lined with ceramics. The body has an arched shape.

Main characteristics:

• Efficiency – 80%.
• Heated area – 220 m3.
• Power – 12.5 kW including heat exchanger.
• Weight – 150 kg.
• Fuel – briquettes, firewood.
• Dimensions – 1129x403x519mm.
• Water circuit.
• Clean glass system.
• Afterburning system.
• Cost – 86,000 rubles.
• Manufacturer – Czech Republic.

The fireplace stove will fit perfectly into the interior of any style. Thanks to the high quality of workmanship and functionality, the model is ideal for heating a country house.