TOP 15 best wall heaters: 2021-2022 price/quality rating and which model to choose for your home

Heaters are divided into ceiling, floor and wall. The former outperform their competitors due to their location, because they do not waste useful space in the premises.

But this option is not universal and requires accurate calculation of power. In the second case, everything is simpler, but a device located on the floor in the middle of the room can interfere, especially if the room is not too large.

There remains a third option, heaters, which is more attractive in many respects. Our rating of the best wall heater models will help you choose such a device.

Rating of the TOP 15 best wall heaters for the home for 2021-2022

How to choose the right wall heater?

Types of heaters:

• Ceramic wall heater. If you plan to use electric heaters on an ongoing basis, then you should choose more powerful heaters equipped with heat sensors, timers and other functions. This will improve the efficiency of the entire heating system and ensure rational energy consumption. When choosing the latest ceramic slabs, it is worth considering that the cost of a heating panel for 12 sq.m can be about 5,000 rubles, and maybe even higher, depending on the manufacturer.
• Convector.
  In addition to the characteristics and advantages presented by manufacturers and distributors of wall heaters, it is worth taking an interest in customer reviews. A large number of positive ratings for heaters from a particular company can serve as a good guide when choosing a heating device.

Important characteristics to pay attention to when choosing:

• Heating power.
  The higher it is, the larger the area of ​​the room the device can heat.
• Waterproof housing.
  Such units can be placed in damp areas.
• Overheat protection.
  This option allows the device to turn off in a timely manner if its temperature has reached maximum values.
• The presence of a thermostat.
  It will give you the opportunity to independently set the air heating temperature.
• Various modes.
  Allows you to save energy and regulate the operation of the device.
• Fastening method.
  Many heaters have special stands, thanks to which the product can be placed on a horizontal surface.

Device design

An infrared film heater is a device whose heating element is located on foil between layers of heat-resistant film. When exposed to electric current, it emits infrared rays.

Wall heaters are made in the form of small posters

They act on objects in the room that accumulate heat and then release it. Heat exchange occurs and the air in the room heats up.

The devices have a similar design and the same principle of operation and are:

• floor;
• ceiling
• wall-mounted

This article will focus on floor and wall heaters. Floor-standing units are mounted on a large surface and warm the room well. They can be completely hidden, making them invisible in the interior. Can be installed anywhere in the room.

Film heaters are easily mounted on the surface of the subfloor and hidden under the final covering (laminate, linoleum, parquet, carpet). They are just as easy to dismantle.

Wall heaters are made in the form of small posters with drawings or photographs printed on them. They are needed for local heating of a house, cottage, or garage.

Such heaters quickly heat up and radiate heat, creating a comfortable temperature within a radius of 2.5-3.0 m. These devices are fireproof. It is impossible to get burned by them.

Which heater is better to choose

If you need a device for rooms with high humidity, then buy the best infrared wall-mounted quartz heater from Ballu or a convector model from Timberk.

For the home, large rooms and industrial facilities, Noirot Spot E-5 plus 1500 will be an excellent choice. You can decorate the room with Electrolux brand products. The ranking of the best wall heaters, in turn, was topped by the Noirot brand, but if you need something cheaper, then buy Hyundai.

How they work

The wall-mounted film heater can only be used on vertical surfaces

The stream of infrared rays is directed upward from the surface of the floor or wall. A flat floor heater heats the floor and warms the air that rises. The air is warmest near the floor surface.

Heating allows you to quickly raise the air temperature throughout the room. The film system does not require the installation of other heating devices.

The advantage of a floor heater is that infrared radiation does not affect equipment and household appliances and cannot damage them.

Among the disadvantages is the likelihood of damaging heavy furniture due to exposure to heat flow.

The wall-mounted film heater is located on a vertical surface (wall, window). It can well warm up a glassed-in loggia, a garage, a bathroom, a local area near a desktop or next to a bed or chair where a person will be.

You can use it to dry herbs, fruits, and berries. Cons: insufficient coverage. A small film heater will not heat the air inside the entire room, but only the area in its immediate vicinity.

Please note that the device can only be used on vertical surfaces. You cannot sit or stand on it. It cannot be used as an oilcloth or sheet on a bed.

Customer Reviews

Dmitry Belov

Noirot Spot E-5 plus 1500

What I like most is that the convector works on the principle of natural convection, there is no smell, no cracking, and the controls are simple. The convector is mounted on the wall. Flat, does not take up much space, easy to install, 5 minutes of work. It warms well, the effect begins to be felt quickly, after 15 minutes you can take off your jacket, after an hour you can be in home clothes (we are talking about a country house). Yes, it costs more than some, but it is better to pay money for the quality and peace of mind of all family members. I no longer have to jump if a child touches it with his hand, it is not hot, it does not burn. I never set it to maximum; average values ​​are enough. There was a choice, but I chose Noirot Spot E-5 Plus 1500. The entire area, which is 22 square meters, is heated by one, without an additional source.

Andrey Kuznetsov

BEC/EVU-2500

Wall installation - does not take up space. Fastenings included. Warms up the room well. There is protection against overheating. Nice appearance. Advantages: It heats well a room of 40 square meters in the off-season, insulated to 23 degrees, and more is possible. Disadvantages: After a week it stopped working, didn’t wait, took it apart myself, it turned out that the wire with the connection chip to the heating element itself had come loose, apparently the chip didn’t fit tightly, overheated due to poor contact and fell off. Pressed again. It's still working for now. This may not be a common problem. But that's it.

Daniil K.

BEC/EVU-2500

Experience of use: several months Advantages: I bought an inverter control unit in addition - it works great. I installed it on the wall myself - it’s simple. There is protection against overheating. Heats up quickly: open it, turn it on - after 10 minutes the effect is noticeable. The design is interesting - not ordinary. Disadvantages: I had to think about the cord: it was short. Comment: I am renting a retail space, but it is cold in the complex and they were not allowed to make repairs for insulation. We save ourselves with this convector.

Galina Mukhanova

Noirot Spot E-5 plus 1500

Sufficient power: 1.5 kilowatts, that’s enough for me. In about half an hour, the unheated room reaches a comfortable temperature. At the same time, its small size and, in principle, thoughtful design do not take up much space. In principle, that's all you need for happiness. Minimum but necessary functionality, good heat transfer, invisibility, wall mounting + small dimensions, especially in thickness, high power, safety (moisture insulation and low operating surface temperature), anti-freeze mode, easy to install (fastening, light weight) The convector is not cheap, but it’s better to buy it once than to buy something unknown every year, as my husband said) We bought it for a room with an area of ​​17 square meters, it turned out to be optimal, recommended just up to 20 sq.m. It looks stylish and will fit into any interior. The best and correct way to place the convector is written in the instructions, everything is very clear there, the main thing is not to cover it with anything and not to dry clothes on it.

Elena K.

Electrolux ECH/R-1500 T

Experience of use: more than a year Advantages: Heaters spare oxygen, do not become stuffy. There is no danger of overheating - automatic shutdown occurs. We managed to attach the convectors to the walls ourselves. They did not spoil the appearance - the design is successful. Disadvantages: Everyone is happy, there are no complaints about the devices. I additionally purchased an electronic control unit, installed it myself, and figured it out quickly. Even at maximum heating mode, the case does not become hot, you will not get burned. The air filters perfectly, I determined this by instantly eliminating tobacco smoke. Apparently it also eliminates bacteria with a bang. It is practically invisible on the wall, it takes up really little space, it is narrow, but at the same time powerful.

Bavon Slaev

BIH-AP4-1.0

Experience of use: several months Advantages: Quickly warms up the room. Disadvantages: It clicks louder than the refrigerator when starting up, the clicking first increases and then decreases for about 2-3 minutes, it is very annoying at night. Comment: I bought 2 pcs. 1 kW each to the dacha, to rooms of 12 sq.m. I connected it via Sonoff TH16 with a remote temperature/humidity sensor. Everything works great, except for the clicking sound indicated in the disadvantages. After a month of operation, one of the heaters began to knock out the automatic switch when turned on, the fault was with the controller, I changed it, nothing changed. When dismantling the heater, I noticed that in one of the places where the aluminum plate was attached to the body, the fastening was torn off. I will rent it under warranty, hopefully without hemorrhoids.

Yulia M.

BIH-AP4-1.0

Experience of use: less than a month Advantages: Doesn’t interfere because it hangs on the wall, noiseless Disadvantages: The rotating mechanism has a large step, it’s impossible to adjust it to the desired radius, I’ll say right away that it’s not critical. And I would like more description in the instructions. Comment: In principle, a normal heater, we bought it specifically for the off-season, and immediately bought a regulator for it. Heating is felt throughout the room, not just in spots, as from heating. The only thing is that when I bought it, I couldn’t find information about whether it can be used with stretch ceilings, we are planning to make ceilings, but I would like to clarify. I won’t say anything about power saving, because we’ve been using it for less than a month and the receipt for the electricity hasn’t arrived yet. I am attaching a photo, everything is temporarily connected. We will do repairs and handle everything more carefully.

Yaroslav Popiralkin

Electrolux ECH/R-1500 T

Experience of use: several months Advantages: The design of the blinds increases the flow of heated air. Comment: We chose a modern electronic unit for control of the module and purchased an additional chassis. We heat the room in the apartment. With electronic controls, it is easy to precisely set the temperature that is maintained. The convector has 2 heating modes. An improved convector with high-quality assembly. I took it for use for temporary heating in autumn/spring and for the bathroom. Compared to earlier releases, this model has a larger air intake with improved louvres, heat is transferred better and it is very sensitive. Because Using it for the first time, I chose a simple mechanical control unit for testing - I’m completely satisfied. Heats the room well, no complaints.

Anton N.

Electrolux EIH/AG2-2000E

Experience of use: less than a month Advantages: Works as stated by the manufacturer. Of the available heating methods in a wooden house, it is practically the safest. The mobility of the model allows the heater to be used in the rooms needed. Relatively economical. Disadvantages: Mostly little things that do not affect the characteristics: - Short cord - When removed from the package, the heating elements have play in the fastenings and knock. — when heated, the grating in the upper part is deformed (becomes a wave). — cools down quickly Comment: Performs its functions as expected. I will take a similar model to other rooms. I recommend.

Pavel M.

Hyundai H-HV16-10-UI620

Experience of use: less than a month Advantages: An excellent heater for heating an apartment during the off-season, when it is autumn and the heating has not yet been turned on, and in the spring, when the heating has already been turned off. Disadvantages: No carrying handle. During operation, the case gets quite hot and it is impossible to pick it up. Even the corners are hot. If you need to move it to another room, this creates inconvenience. Maybe I'll come up with something and make a handle for it myself. The instructions are bad. It is one of a bunch of models and not everything is indicated in it. For example, the convector power is 1000 W, but the heater has two power buttons. Nowhere is it written how much power each key provides individually. I had to connect a watt meter. It turned out that the first button produces about 525 W, the second about 520 W. Together they produce about 1045 watts. It's a pity, it would be better to do 600+400 or 700+300. This way it would be possible to specify different options for intermediate power. The power keys have a weak backlight; during the day you can’t see what’s on at all. Comment: An ideal option for those who do not need to heat it up very much in a short time, but rather to leave it overnight so that it warms itself quietly and it is not cold at night. I have a powerful 2500 W oil heater. It gets too hot and has to constantly turn on and off. When turned on and off, a click occurs, and then the case itself clicks due to the thermal expansion of the metal. It is difficult to sleep with such constant clicking. The only option is to set it to minimum power (turn on only one heating element per 1000 W), the thermostat to maximum - then it does not click, but even this can be too much. In the morning you wake up - there is a sauna in the room. That's why I decided to buy some kind of low-power heater. It also has two power buttons and the rated power of 1000 W can also be reduced by 2 times (if you need to heat just a little or the room is small). There is a thermostat, but I don't usually use it. I prefer to turn it on at either 500 or 1000 W in advance and have it work constantly.

Dmitry B.

Electrolux EIH/AG2-2000E

experience of use: less than a month Advantages: Power, heating speed, noiselessness and does not dazzle with light, including from the control panel. Disadvantages: Not found Comment: So far there has not been a need for long-term switching on, so it was not possible to test all the advantages of this heater and use it at full power. When turned on for the first time and generally operated for about 10 minutes, it warmed up very quickly - less than a minute, and after 3 minutes, warmth was felt at a distance of a couple of meters. It doesn’t buzz, but only when it heats up and cools down, it makes a slight crackling sound, and doesn’t dazzle with the bright display of the control panel - due to the darkened cover. The settings are simple and understandable. The heater itself looks strict and laconic.

Vlad Abramin

BIH-AP4-1.0

Experience of use: more than a year Advantages: 1) Convenience of mounting to the ceiling, and connecting to the wiring, everything is simple and clear. 2) Design Disadvantages: 1) Build quality (but maybe it’s just me, it started clicking, it was solved by disassembling the heater and squeezing some places with pliers); 2) Heating range across the width, and not just underneath. (Example: if you hang it over the bed, lengthwise, but closer to the feet, then after some time the legs will get hot, but the head will freeze; in length, it warms more or less normally, i.e., for example, if the bed is double, then and on the second part of the bed your feet will be quite warm) Comment: In general, it heats the area directly underneath perfectly, it also heats the sides along the length more or less, but not to the sides along the width. Additionally, I connected a BMT-1 thermostat to the heater. After about a few months, when it was working (heating, when the thermostat does not turn it off), something began to click inside, this does not affect the operation, but now you can’t leave it overnight because it’s loud, judging by the reviews it’s something with the expansion of the metal... In general, this can happen in all models of different companies. In comparison with an oil heater, this is of course better (the power is the same), both in terms of heating and convenience (it doesn’t take up too much space), but not the heating speed, which is slow. Especially if you come in winter and the house is icy, you need to wait at least an hour or two.

Advantages of floor and wall heaters

One of the advantages of the device is its inconspicuous placement

The devices have a number of advantages over other heating devices:

1. Long term of use. The heating elements inside the film last indefinitely.
2. Economical. Electricity consumption for operating the device is 30% less than other electrical appliances. Installation costs are also low. Film devices do not require additional maintenance, so operating costs are almost zero.
3. Easy installation and discreet placement of the floor-standing device. The equipment does not take up useful space and does not spoil the appearance of the room. Wall panels with a bright photograph or drawing, on the contrary, decorate the room and give it an original look. Floor films are placed under the covering and are not invisible to the eye.
4. Environmental friendliness. Infrared radiation does not harm humans. The distribution of heat in space is optimal for the body. Air humidity and the amount of oxygen are completely preserved during equipment operation.
5. Full automation. In this case, you can adjust the temperature in each room in which the device is located.
6. Durability and reliability. If any element is damaged, the failure will not disable the entire system.