Rating of TOP 12 voltage stabilizers for a gas boiler: which one to choose, review of the best models

A voltage stabilizer is a device designed to maintain the output voltage within a narrow limit that complies with standards, regardless of the input voltage parameters. In simple words, the stabilizer passes through itself the incoming voltage from the household electrical network and produces at the output the voltage required for normal operation of the gas boiler, close to 220 or 230 V with a smooth sinusoid with a frequency of 50 Hz. However, for a gas boiler, voltage stabilizers are not always justified.

Criteria for choosing a voltage stabilizer for a gas boiler

The most common are electromechanical with a servo system, relay with step voltage regulation, inverter with double energy conversion and hybrid models.

Inverter stabilizers are the most accurate and progressive, relay stabilizers are the cheapest and most common.

When choosing this equipment, you need to consider a number of points:

• Number of phases. Domestic gas boilers are mainly designed for connection to a single-phase 220 V electrical network. Powerful three-phase equipment requires power from a three-phase 380 V network and the selection of an appropriate stabilizer.
• Load power. The output power of the stabilizer must correspond to the same characteristics of gas equipment. The average boiler power for a small private house is 150-200 W, while consumption at start is 2-3 times higher than the nominal parameter.
• Stabilization speed. The characteristic reflects the time spent on equalizing the output voltage. A high stabilization speed with a reduction in the response time of the system in case of deviations guarantees protection of the boiler from breakdowns and its stable operation.
• Input voltage. Extreme network deviations, up or down, can easily damage the connected equipment. For this reason, for a gas boiler it is recommended to choose a stabilizer with the widest input voltage range.
• Output voltage. For working with a gas boiler, a stabilizer with a permissible deviation of ±10% is recommended. There are also more accurate devices that completely eliminate malfunctions and increase the service life of connected equipment.
• Other parameters. Modern network stabilizers are equipped with a number of useful options and capabilities. These are, for example, electronic protection against overheating/overload/short circuit/network failures, automatic restart, surge protectors, digital or LED indication. Expanded functionality contributes to the convenience and better performance of the stabilizer.

Energy VOLTRON - 1,000 5% E0101-0154 - power and accuracy

Wall mounted stabilizer. Levels out input distortions of network electricity. It is distinguished by high accuracy and small error coefficient.

Works in tandem with computer and household appliances, heating equipment, control units from the “smart home” series.

It is used in private homes, medical institutions and laboratories, and office premises. Reaction time is less than 10 milliseconds. Works outdoors in any weather.

Pros:

• High-quality assembly, beautiful design, precision.
• Powerful device, good output parameters, small error.
• Small size, LED display.

Minuses:

• Only one output socket.

The best models in terms of price/quality ratio

The presented models are distinguished by their affordable cost, sufficient response speed and good stabilization accuracy.

Rating of the TOP 5 voltage stabilizers for a gas boiler in terms of price and quality.

Defender AVR Typhoon 1000

Single-phase stabilizer Defender AVR Typhoon 1000 with built-in surge protector is one of the most economical solutions for domestic gas boilers.

The device is equipped with an automatic voltage regulator, overload and overheat protection, and an automatic fireproof fuse.

The output voltage with an error of 10 percent can vary within acceptable values ​​from the nominal values ​​of 198-242 V.

Informative LED indicators allow visual monitoring of the device status.

The stabilizer has compact dimensions and light weight.

Specifications:

• stabilizer type - relay;
• rated power - 320 W;
• input voltage - 175-285 V;
• stabilization accuracy - ±10%;
• output voltage - 198-242 V;
• information display - LED indication;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 2 sockets;
• overall dimensions - 115x110x140 mm;
• device weight - 1.5 kg.

Advantages

• compact dimensions;
• two sockets for connection;
• Illuminated power button;
• visual indication of modes;
• good build quality.

Flaws

• short connection cord;
• high noise level;
• low power.

RESANTA ACH-2000/1-C (2 kW)

The RESANTA ACH-2000/1-C (2 kW) model with protection against overheating and overload will solve the problem of unstable power supply to household gas boilers by maintaining optimal voltage in the network.

The holes located on the unit body provide natural cooling of the components. Internal elements are protected from mechanical damage by a reliable housing.

The electronic display of the single-phase device shows operating parameters.

The auto shut-off system is responsible for safety when the maximum permissible power is exceeded. The response time is 5-7 ms.

Specifications:

• stabilizer type - relay;
• rated power - 2000 W;
• input voltage - 140-260 V;
• stabilization accuracy - ±8%;
• output voltage - 202-238 V;
• display of information - digital display;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 1 socket;
• overall dimensions - 140x170x237 mm;
• device weight - 5.8 kg.

Advantages

• stability of work;
• small sizes;
• low price;
• low energy consumption;
• ergonomic design.

Flaws

• no indication of current input/output voltage;
• heating during operation;
• loud relay.

SVEN AVR SLIM 1000 LCD (0.8 kW)

The compact SVEN AVR SLIM 1000 LCD stabilizer will reliably protect an electric gas boiler with an active power of 0.8 kW from high-voltage pulses, short circuits, overheating and overload.

The switching time of relay equipment does not exceed 10 milliseconds.

The input voltage can vary from 140 to 260 V, the output provides optimal 220 V with a frequency of 50 Hz.

The gray metal body of the device is equipped with elements for wall mounting, and a built-in digital voltmeter displays the input and output voltage.

A standard socket is provided to connect the load; the thermal breaker acts as a fuse.

Specifications:

• stabilizer type - relay;
• rated power - 800 W;
• input voltage - 140-260 V;
• stabilization accuracy - ±10%;
• output voltage - 198-242 V;
• display of information - digital display;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 1 socket;
• overall dimensions - 290×175×60 mm;
• device weight - 2.9 kg.

Advantages

• stylish design;
• possibility of wall mounting;
• reliable metal case;
• power supply indication;
• template with fastener markings included.

Flaws

• audible relay clicks when switching;
• short input cord;
• one socket on board.

ERA SNPT-2000-C

The ERA SNPT-2000-Ts device with a declared efficiency of up to 95 percent is recommended for stabilizing the power supply network for domestic gas boilers and other sensitive equipment.

The stabilizer is capable of handling an active load with a total power of 2 kW.

Connection of consumer devices is carried out to two sockets.

The unit is supplemented with a digital display, which allows you to determine the main parameters and control the operation of the device.

Natural passive cooling in the form of ventilation grilles on the case is responsible for cooling the elements. The model can be installed on the floor.

Specifications:

• stabilizer type - relay;
• rated power - 2000 W;
• input voltage - 140-260 V;
• stabilization accuracy - ±8%;
• output voltage - 202-238 V;
• display of information - digital display;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 2 sockets;
• overall dimensions - 140×188×265 mm;
• device weight - 4.7 kg.

Advantages

• high-quality assembly and materials;
• relatively quiet operation;
• two sockets for connection;
• small dimensions and weight.

Flaws

• unstable legs;
• very bright display.

TEPLOCOM ST-555-I, white

The single-phase stabilizer TEPLOCOM ST-555-I with the possibility of wall-mounted installation in close proximity to the consumer device is designed to power gas heating boilers with a power of up to 0.4 kW.

When developing the presented model, the basic requirements for the parameters of their power supply were taken into account.

The stabilizer is equipped with microprocessor control, an accident protection system with automatic recovery, and an emergency indicator.

The device provides quick and easy connection; for this purpose there is a standard Euro socket on board.

Specifications:

• stabilizer type - relay;
• rated power - 400 W;
• input voltage - 145-260 V;
• stabilization accuracy - ±9%;
• output voltage - 200-240 V;
• display of information - digital display;
• protection - against short circuit/overvoltage;
• load connection - 1 socket;
• overall dimensions - 130×170×85 mm;
• device weight - 1.8 kg.

Advantages

• compact dimensions;
• input voltage indication;
• has all the necessary functions;
• ease of use;
• holds overload well.

Flaws

• short cord;
• only one socket.

POWERMAN AVS 500 S – affordable price

Single-phase stabilizer for working with gas boiler equipment with a power of up to 200~300 watts. It is small in size and weight. Made in a wall-mounted version. Equipped with a European output socket. Stabilizes the input parameters of the electric current.

Built-in filters cut off extraneous frequency noise and remove interference. Visual control is carried out on a liquid crystal display. The current state of the structure is reflected by light indicators.

Pros:

• Compact, light weight, fulfills its functions.
• Peak load and short circuit protection.
• Inexpensive, easy to install and connect.

Minuses:

• The socket is at the bottom, slightly inconvenient.
• For some reason there is no second indicator.

Recommendations: 12 best gas boilers

13 best solid fuel boilers

14 best electric boilers

The best three-phase stabilizers for a gas boiler

Stabilizers of this class are used to connect domestic and industrial boilers with a supply voltage of 380 V.

RESANTA ACH-15000/3-EM (15 kW), black

Three-phase equipment RESANTA ACH-15000/3-EM (15 kW) is designed to provide high-quality power supply to domestic and industrial gas boilers in conditions of unstable network voltage.

This stabilizer is equipped with an electric motor that regulates the output voltage with high accuracy.

The error is only 2 percent, or 4 V.

A total power of 15 kW allows you to power one or more consumer devices and even small objects in general.

The stabilizer is protected from short circuits, overheating, overvoltage and pulsed network noise.

Specifications:

• stabilizer type - electromechanical;
• rated power - 15000 W;
• input voltage - 140-260 V;
• stabilization accuracy - ±2%;
• output voltage - 216-224 V;
• display of information - digital display;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - output terminals;
• overall dimensions - 360×840×360 mm;
• device weight - 60.2 kg.

Advantages

• reliable microprocessor control;
• high speed of protection response;
• built-in filters against interference;
• output voltage stability;
• holds overload well.

Flaws

• impressive dimensions;
• heavy weight;
• high price.

RESANTA ACH-9000/3-EM (9 kW), black

The three-phase stabilizer RESANTA ACH-9000/3-EM is designed to provide power to gas installations and other equipment with a total electricity consumption of up to 9 kW.

The input voltage range of the unit is 140–260 V (on one phase).

This stabilizer is equipped with an electric motor that allows you to regulate the output voltage with higher accuracy.

The error in this model does not exceed 2 percent.

The device is equipped with a protection unit against short circuit, overheating and overvoltage.

The built-in digital indicator allows you to control the operation of the device.

Specifications:

• stabilizer type - electromechanical;
• rated power - 9000 W;
• input voltage - 140-260 V;
• stabilization accuracy - ±2%;
• output voltage - 216-224 V;
• display of information - digital display;
• protection - against short circuit/overheating/overvoltage;
• load connection - output terminals;
• overall dimensions - 330×770×330 mm;
• device weight - 39.1 kg.

Advantages

• reliability;
• accuracy of work;
• no noise;
• high power.

Flaws

• heavy weight;
• heating during operation.

Energy Hybrid 15000/3 II, black

Three-phase voltage stabilizer Energy Hybrid 15000/3 II is an improved model equipped with an advanced voltage regulation control circuit, ideal for powering gas boilers.

The presented device is equipped with a processor control board that ensures stabilization accuracy with an error of no more than 3 percent of the nominal value.

Reliability and long-term operation are guaranteed by the rational layout of internal components and innovative autotransformer winding technology.

The stabilizer has an extended input voltage range from 100 to 260 V.

Specifications:

• stabilizer type - hybrid;
• rated power - 15000 W;
• input voltage - 100-260 V;
• stabilization accuracy - ±3%;
• output voltage - 213-227 V;
• display of information - digital display;
• protection - from short circuit, overheating, overvoltage;
• load connection - output terminals;
• overall dimensions - 230x380x545 mm;
• device weight - 46 kg.

Advantages

• Ease of use;
• informative control panel;
• minimum error;
• high power.

Flaws

• not an affordable price tag;
• case heating;
• heavy weight.

RUCELF BOILER-1200 – protection of boiler units

Single-phase stabilizer for reliable provision of boiler heating equipment with stabilized voltage. It is implemented in a wall-mounted version, which allows you to save space and make more efficient use of the room area.

Levels out voltage surges and eliminates impulse noise. Works over a wide input range. It has a high motor life, the internal components are enclosed in a durable and rigid steel body.

Pros:

• Performs basic functions successfully and works in a basement environment.
• Powerful – boiler and circulation boiler connected.
• Durable, rigid case, small in size, mounted on the wall.

Minuses:

• No input fuse.

The best inverter single-phase models

The presented stabilizers use the principle of double energy conversion, which eliminates most of the disadvantages inherent in other types of devices.

Calm IS350 (0.3 kW)

Single-phase inverter-type stabilizer Shtil IS350 (0.3 kW) is designed to protect gas boilers and other equipment sensitive to the quality of the mains power supply.

The model has a wall/desktop version, built-in protection against impulse noise, protection against malfunctions and failures.

Quiet operation ensures natural cooling.

The unit has an instant response to changes in input voltage, high stabilization accuracy in the region of 2 percent of the nominal value, and a wide range of input voltages.

LED indicators make it possible to monitor the status and operating modes of the stabilizer.

Specifications:

• stabilizer type - inverter;
• rated power - 300 W;
• input voltage - 90-310 V;
• stabilization accuracy - ±2%;
• output voltage - 216-224 V;
• information display - LED indication;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 1 socket;
• overall dimensions - 155x223x80 mm;
• device weight - 2 kg.

Advantages

• ease of use;
• stencil for installation included;
• no noise during operation;
• high-quality assembly and materials.

Flaws

• lack of information board;
• non-removable power cord;
• inflated price tag.

Stil IS5000 2022 (4.5 kW), gray

Inverter stabilizer Shtil IS5000 2022 (4.5 kW) is a new generation device with double transformerless energy conversion to protect against high and low input voltage levels of gas boilers and other electrical appliances.

The stabilizer is wall-mounted and convenient for installation in small spaces.

Connection to the network and load is carried out through terminals and an input circuit breaker.

The front panel of the product is equipped with an electronic display with digital readout.

Cooling in this model is forced fan with an intelligent rotation speed control system.

Emergency protection against short circuits, impulse noise, overload and overheating is provided.

Specifications:

• stabilizer type - inverter;
• rated power - 4500 W;
• input voltage - 90-310 V;
• stabilization accuracy - ±2%;
• output voltage - 216-235 V;
• display of information - digital display;
• protection - from short circuit, overheating, overvoltage;
• load connection - output terminals;
• overall dimensions - 246x358x101 mm;
• device weight - 6 kg.

Advantages

• light weight;
• compact dimensions;
• quiet operation;
• excellent build quality;
• decent equipment.

Flaws

• high price;
• heating under load.

Stil IS550 (0.4 kW), gray

Single-phase inverter device Shtil IS550 (0.4 kW), equipped with LED indicators for monitoring status and operating mode, is designed to power gas boilers, household appliances and refrigeration equipment.

The model is equipped with built-in protection against impulse noise, malfunctions and malfunctions.

The equipment is characterized by a high response speed to changes in input voltage, increased stabilization accuracy, and a wide range of input voltages.

The system is controlled by a high-performance digital microprocessor.

The electronics provide continuous regulation of the output voltage with no unpleasant effects when switching stabilization thresholds.

Specifications:

• stabilizer type - inverter;
• rated power - 400 W;
• input voltage - 90-310 V;
• stabilization accuracy - ±2%;
• output voltage - 216-224 V;
• information display - LED indication;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 1 socket;
• overall dimensions - 155x245x82 mm;
• device weight - 2 kg.

Advantages

• compact unit;
• low noise level;
• small error;
• ease of connection.

Flaws

• unreliable power button;
• lack of digital display;
• only one socket for load.

RESANTA ACH-600/1-I (0.6 kW), gray

The inverter stabilizer RESANTA ACH-600/1-I (0.6 kW) in a universal gray design is compact equipment for protecting gas boilers from voltage surges in the electrical network.

The weight of the presented device is only 4 kg, the device is easy to carry and transport.

The housing protection level corresponds to class IP20.

The presented stabilizer has passive cooling, is equipped with two sockets, and a wall mounting system.

The efficiency of the unit reaches 97 percent. The rated load power is 0.6 kW.

Specifications:

• stabilizer type - inverter;
• rated power - 600 W;
• input voltage - 90-310 V;
• stabilization accuracy - ±1%;
• output voltage - 218-222 V;
• information display - LED indication;
• protection - against short circuit/overheating/overvoltage/interference;
• load connection - 2 sockets;
• overall dimensions - 410×225×125 mm;
• device weight - 4 kg.

Advantages

• high accuracy;
• bright LED indication;
• silent natural cooling;
• possibility of wall mounting;
• two output sockets.

Flaws

• high price;
• short connection cable;
• lack of digital display.

In what case is it advisable to use a UPS instead of a stabilizer?

In addition to voltage stabilizers, there are also uninterruptible power supplies (UPS), which provide a constant volt value and can provide voltage to boiler equipment. Their difference lies in the presence of batteries that provide backup current even when the power in the house is completely turned off. The duration of power supply depends on the battery capacity, and the latter is directly related to the size of the equipment and cost.

It is not advisable to buy an IPB when there are no long power outages. If in an apartment building or village the voltage sometimes disappears (breaks in the line, drop below 100 V from user loads), the stabilizer will turn off the boiler and wait for the power to be restored. Since the heating has a large temperature reserve, the system will not shrink after 5-6 hours of inactivity, even in the most severe frosts. As soon as the voltage level is restored to the minimum allowable according to the stabilizer’s passport, it will pass it through and the boiler automation will start working again.

But if power outages occur for a long time (the light went out in the evening and appeared only the next day at lunch), and this happens once a month, then you should think about purchasing an UPS. Using batteries, the device will be able to provide power to the boiler and pump, which will prevent the coolant from cooling down.

Its principle of operation is to accumulate energy in batteries while there is voltage in the network, and release current to consumers in the event of a general shutdown. The transition from external voltage to internal voltage occurs instantly, so the equipment continues to work. The disadvantages of the UPS include more complex maintenance, increased housing size, and high cost.

UPS types

Uninterruptible power supplies are structurally divided into two types:

UPS with built-in battery. They have a small reserve due to the low battery capacity. Designed to maintain the functionality of the boiler electronics, and possibly equipment alarms (low-flow networks).

UPS connected to external batteries. This is a more advanced type of equipment that is capable of powering the boiler, pumps, and ensuring the operation of solenoid valves and other actuators. With their help, you can survive long blackouts without any consequences for the indoor microclimate.

UPS architecture type

Equipment with batteries is divided into three types according to their design architecture:

• Offline. They operate without a built-in stabilizer, so as soon as the network indicators become unacceptable, they switch to battery operation. If the input current parameters change frequently, the battery will be used regularly and will quickly discharge.
• Online. Has an increased number of batteries and produces double current conversion. The battery is constantly recharged, and the boiler receives voltage from the battery, converting 36 V DC to 220 V AC. Optimally suitable for boiler equipment, but expensive.
• Linear interactive. At the same time, the battery is recharged and voltage is supplied to the boiler, leveling the indicator to 220 V. It is distinguished by sufficient accuracy of the output voltage and an average price.

Comparison of voltage stabilizers and UPS

To summarize, we can highlight the main points: a voltage stabilizer is essential to protect the gas boiler; It is important to calculate its power with a reserve according to the formula, select a speed of 5-10 ms. The protection and restart functions are important. For prolonged power outages, it is better to choose a UPS with online architecture.

If you notice an error, a non-working video or link, please select a piece of text and press Ctrl+Enter .

0

Semiconductor (thyristor and triac) circuits

Devices with semiconductor switches - thyristors and triacs - can be built according to two principles:

1. Similar to a relay circuit. The only difference is that semiconductor devices are used as a key rather than relay contacts.
2. Using a transformer at the input and regulating the output voltage by changing the opening angle of thyristors (triacs).

The first circuit is similar in characteristics to the relay circuit, but has higher performance. At the same time, to control semiconductor switches, a more complex circuit is required, and they themselves have a higher cost, lower overload capacity and less time between failures.

In a circuit with an AC voltage regulator, the transformation ratio remains unchanged. The effective voltage value is stabilized by controlling the moment of unlocking the keys. This approach makes it possible to simplify and reduce the cost of the winding unit and the structure as a whole.

However, this method of regulation has its own disadvantages, the main of which is the non-sinusoidal output voltage and the high level of interference induced into the network.

Expert opinion

Grebnev Vadim Savelievich

Heating system installer

Both variants of such schemes require cooling of the switches, the power losses on which are higher than on the relay. This affects the dimensions of the structure.

Power calculation

It is worthwhile to dwell separately on the calculation of the power of the stabilizer, since this is one of the most important parameters that must be taken into account when choosing.

To determine the minimum power of a 220 V device, the following initial data will be required:

• Electrical power of the automatic elements of the boiler and circulation pump. Information can be found in the technical data sheets of the devices.
• The total power of all energy-consuming devices connected to the stabilizer.

The resulting amount is multiplied by a factor of 1.3, which takes into account the starting current. It should be noted that turning on the pump causes a jump in energy consumption by approximately three times. These calculations are somewhat complex, so it is recommended to use the services of specialists.

Bastion Teplocom ST-555 – super compact design

Small-sized voltage stabilization device. Levels out differences in input parameters of the electrical network. The model is specially designed to protect the heating system and individual components, including gas boilers. Has a remote socket on a flexible cable.

The stabilizer is designed for use in basement conditions with high humidity. Provides protection against lightning strikes.

Pros:

• Super small size, easy to install, lightweight.
• Completely fulfills its duties and is quite accurate.
• Bright LED indication, replaces the night light at night.

Minuses:

• Loud, very good clicks when working.
• The output voltage fluctuates and there is instability in operation.

Correct connection

For long-term operation of a gas boiler, proper connection is necessary. To regret 5-10 thousand and lose a boiler worth 100-200 thousand rubles, one cannot say that this is the right decision.

We can recommend installing a voltage control relay for the gas boiler immediately after the introductory circuit breaker. To eliminate interference, connect the boiler through a surge protector.

Gas boilers are mainly installed in rural areas and country houses. Electricity is supplied via a two-wire line. With this supply, a TT system is used for grounding. To prevent unforeseen situations, we recommend installing an RCD with a current of up to 30 mA.

When arranging the grounding of the boiler, it is recommended to use a separate circuit that is isolated from the rest of the network. To calculate the resistance, study clause 17.59 of the Electrical Installation Rules.

Calm R 800T – high reliability

Wall-mounted single-phase AC voltage stabilizer. Designed to work with heating equipment and heating boilers. Has built-in frequency filters to correct input distortion.

Equipped with LED indication, two European sockets are built-in for connecting to consumers. An electronic protection system and a special algorithm for operating in normal mode and peak loads are used.

Pros:

• High-quality assembly, nothing superfluous, good power.
• Design, informative display.
• Unpretentious, reliable, stable output parameters.

Minuses:

• The display is missing.
• Possibly high price.