When planning a space heating system, you should pay attention to vertical heating radiators, which are selected to suit any sophisticated interior. However, the impressive design of the device is somewhat offset by the considerable price, specifics of connection and operation, which should be understood before purchasing. Do you agree?
We will talk about all types of vertical radiators on the market. The article we propose describes in detail the varieties, their design features and technical characteristics are given. To make it easier for the buyer to solve the problem, we have listed the leading manufacturers.
Why install vertical heating radiators?
It is known: the larger the surface of the batteries, the better and faster the room is heated. As a rule, they are mounted under windows, but it is not always possible to do this.
Vertical heating radiators for an apartment are installed if, for example, the building has panoramic glazing, or the windows are located too low, or there is a narrow section of the wall, and the installation of conventional horizontal heat exchangers will not provide adequate heat transfer.
In these cases, you can “increase” the heat exchanger area upward, that is, use vertical radiators.
In addition, they look very unusual and aesthetically pleasing. Therefore, when choosing water vertical heaters, you should choose heating devices that are not only functional, but also decorative, emphasizing the advantages of the interior.
Features of vertical radiators
The most common is a vertical battery, that is, devices with vertical sections. Horizontal or, as they are also called, high heating radiators are quite rare.
The most successful characteristic can be considered the location of the rectangle, which is formed by the perimeter of the radiator. Batteries whose height of the rectangle exceeds its width will further be conventionally called vertical radiators.
If, after all, by and large, it is wrong to say that such an assessment is accurate, due to the fact that many batteries, even at first glance, do not fit the description as vertical; they can be described much more accurately as “high”.
In simple terms, there are no strict and clear boundaries; it is mainly recommended to rely on your own visual perception.
But this criterion is not strictly fundamental, since technically horizontal and vertical heating radiators are quite similar in their main characteristics.
But in terms of operational properties, there may be some nuances that will determine the main positive or negative properties of vertical heating radiators.
The main advantages include the following characteristics:
- Saving space in rooms. Vertical radiators of the required thermal power can be placed even in the narrowest free space of the wall.
- This type of radiator makes it possible to distribute heat to its entire height, which can reach almost human height, which provides some advantages in ensuring the convenience of people staying in the room where devices of this type are installed.
- None of the heating devices has such a wide, without any exaggeration, range of different external designs and configurations. You can choose the highest model with a wide variety of designs - tubular, panel, sectional, etc.
- Batteries of this type, in addition to the main thermal purpose, quite often also have additional functions. Their size, design and configuration quite often make it possible to turn them into clothes and towel dryers, furniture elements, interior partitions, decorative panels, wall mirrors and much more, which can be very useful in everyday life.
But the vertical heating device is not without its disadvantages:
- One of the methods of heat transfer, and more specifically convection, is used quite irrationally by such radiators - a so-called “thermal cushion” remains under the ceiling, which creates an obstacle to faster natural circulation of air flows. The interior space of the room does not warm up very evenly, despite the fact that the temperature at the top is higher, which is why the level of comfort drops. But this also creates unfavorable conditions for the spread of dust, which is a very significant advantage.
- These vertical batteries are perhaps the most vulnerable part in terms of the formation of air jams in the internal channels.
- There are also some difficulties during installation, this relates to the evenness of their location on the wall. Even with the slightest deviation of just half a degree from the vertical it will be visible. Another problem is the laying of heating circuit pipes. The use of the most effective diagonal supply and return scheme is quite problematic due to the fact that the pipes will either need to be embedded in the walls at long intervals, or they will spoil the interior with their appearance. In this case, you have to use the bottom connection, which is not as optimal in terms of efficiency of heat energy use as the diagonal circuit.
- Also, the disadvantages include the massiveness of most batteries of this type, especially after filling with coolant; installation also leaves a rather serious mark due to the need for reliable fastenings that come with radiators. It would not be amiss to mention the price, which is much higher than that of conventional heating batteries.
As mentioned earlier, the design of vertical batteries is not fundamentally very different from standard ones.
Source: https://about-air.ru/temperatura-vozduha/nagrev-vozduha/vertikalnyj-radiator-dlya-kvartiry.html
Installation features. Useful tips
Installing radiators yourself is not that difficult. It must be taken into account that vertical structures are more bulky and will take more time to install them under the ceiling. All wall-mounted heating devices, regardless of model and design features, are attached to the wall using brackets and connected either to the hot water pipeline or to the power supply network.
What you need to pay attention to when installing vertical heating devices:
- vertical models are heavier than horizontal ones, so they need to be placed only on a load-bearing wall;
- It’s good if you can hide the pipes in plasterboard structures or drown them in grooves. If not, bring the pipes to the bottom of the radiator. This way the design will look more aesthetically pleasing;
- install a jumper that regulates the heat intensity;
- be sure to install chokes and valves so that, if necessary, you can completely turn off the radiator;
- Do not combine copper pipes with aluminum. These metals form a galvanic couple in salt water conditions. Connect aluminum radiators to hot water supply using steel or propylene pipes;
- Aluminum models are not suitable for electrical systems. Current destroys metal much faster;
- the air vent is installed in the upper tube if the suspension is located at the bottom of the battery;
- propylene pipes installed below may not withstand the pressure due to the fact that it is concentrated at the bottom of the radiator. In this case, it is necessary to install a compensator to smooth out the expansion. Thus, the pipes are not deformed when exposed to high temperatures;
- If you need to paint batteries, choose only heat-resistant materials. This applies to both paints and varnishes.
The main types of vertical heating radiators for apartments
Despite the diversity of the range, only three main types of radiators are produced, which, in turn, differ in numerous designs, thermal power and sizes.
Sectional
They are prefabricated structures. If necessary, some sections can be added, removed or replaced. Inside each of them there is a vertical channel for coolant circulation, and outside there is a steel plate to increase the heat transfer area.
They are neat, suitable for many styles, have a relatively small mass, can be up to two meters high, and are inexpensive. However, they are only suitable for use in autonomous heating systems with stable pressure and controlled temperatures.
Panel
They consist of neat thin panels that are made from two stamped sheets of metal. When they are connected, internal vertical channels are formed through which coolants circulate.
There are different designs: from 1 to 3 connected panels. Most models are equipped with convectors (thin corrugated metal plates) to provide additional heat transfer, of which there are from one to three in one radiator. They are also available without convectors.
Tubular
They consist of non-separable pipe sections connected by welding at the bottom and top to the collectors. These vertical radiators are the most common.
They are produced with a different number of sections and come in the most bizarre shapes (tubes not only round, but also with a square cross-section, with wavy bends, intersecting, etc.).
These designs are the most reliable, resistant to pressure changes, and safe due to the absence of sharp corners. But they have low heat transfer, so constant support of coolants is required, which reduces savings. Welding seams are vulnerable to sudden changes in pressure.
Two main disadvantages
- High price.
- Reduced efficiency.
As a rule, such devices are designer creations, and you have to pay extra for originality and style. And the efficiency is reduced due to the lower piping, which takes about 10-20% of the heat transfer.
After all, heated masses move upward. And the under-ceiling part of the radiator will try to heat the already hot air. Often a hot air cushion forms under the ceiling above such a device, to squeeze it out you will need to install a fan.
Features and nuances of installation
There are no fundamental differences compared to installing a conventional battery. A vertical radiator is the most common heating device. And its connection is absolutely the same as that of a standard battery. Pipes can be used both metal and all types of plastic. Moreover, the device will not be held on them, but on special mounts.
The main nuance is in the lower eyeliner. It is advisable to clear the walls and remove the pipes there. And you need to take care of the accessibility of the valves. You may need to quickly disconnect the battery from the heating pipes. And the Mayevsky crane installed at the top should be within reach. With a lower connection, air in the upper part will necessarily and constantly be formed.
This is their main advantage. But you have to pay more for beauty than for a standard battery of the same power. And lose a little in heat transfer.
Material selection
The main feature that allows us to classify vertical radiators is the source material from which each of the products in question is made. In accordance with this criterion they are:
- made of cast iron or steel;
- aluminum;
- bimetallic;
- based on copper and plastic (extremely rare).
Cast iron batteries
Heating radiators made of cast iron are classic models that were widespread in past centuries. They are still in demand among consumers, which is explained by their following advantages:
- product strength;
- relatively low price;
- durability.
On the other hand, this material has a number of significant disadvantages, which forced manufacturers to master the production of modern samples based on more “advanced” materials:
- difficulty of installation due to the significant weight of the mounted systems;
- fragility of cast iron material, inability to withstand impact loads;
- low thermal conductivity, forcing an artificial increase in the temperature of the coolant.
If you need to heat cast iron batteries to 45 degrees, the water temperature in them will have to be raised to 70 degrees. As a result, there is an overconsumption of energy resources, which is especially noticeable during the heating season in private suburban buildings.
Therefore, for a private consumer, the problem of economy is decisive when choosing a material for a heating device.
Steel radiators
Characteristics:
- Heat dissipation – 1200–1800 W;
- Working pressure indicator – from 6 to 15 atmospheres;
- The hot water temperature is 110–120 C.
- Steel thickness is from 1.15 to 1.25 mm.
Advantages:
- Low inertia. The steel heat exchanger heats up very quickly and begins to transfer heat to the room
- Increased heat transfer through thermal radiation and convection
- Long service life thanks to simple design
- Ease of installation
- A light weight
- Low cost
- Attractive appearance, original design. Steel are manufactured in various shapes, allowing them to be placed vertically, horizontally and at an angle
- Compatible with a variety of fastening materials
- High level of energy saving
- Installation of temperature controllers
- Simple design allows for easy maintenance
Flaws:
- Low corrosion resistance. Units made from the thickest steel can withstand a service life of no more than ten years.
- You cannot leave it inside for a long time without water, which is not suitable for central heating.
- Inability to withstand strong water hammer and pressure surges, especially in weld areas.
- If the outer coating was originally applied with flaws, it will begin to peel off over time.
Models of steel radiators differ in the type of connection - it can be side or bottom. The bottom connection is considered universal; it is discreet in the interior, but more expensive.
Depending on the number of panels and convectors, or internal sections, there are several types.
Type 10 has one panel without a convector, 11 has one panel and one convector, 21 has two heating panels and one internal section, and so on, by analogy, types 22, 33 and others are divided. Three-panel heat exchangers are quite heavy, heat up more slowly and require more complex maintenance.
Bimetallic models
Among the currently popular options are the so-called bimetallic vertical radiators, a feature of which is the use of two metals. The inside of the appliances is steel, the outside is aluminum with an enamel coating.
In appearance, they resemble equipment made of aluminum, but differ markedly from it in technical parameters.
The list of advantages of using such models includes:
- corrosion resistance due to a special internal coating;
- stylish and original appearance (especially for models with mirror panels or design in the form of artistic panels), allowing the device to be installed in rooms with any interior;
- no need for special staining;
- simple installation and the presence (in most cases) of a thermostat that regulates the room temperature and reduces heating costs.
There are practically no disadvantages to bimetallic vertical radiators. The main thing can be called the high cost, due to which their popularity is lower compared to steel, aluminum and cast iron models.
In addition, for normal operation of the equipment, high pressure must be constantly maintained in the autonomous heating system of a private house.
Aluminum heating radiators
You can start right away with the main vulnerable feature of aluminum radiators - they are very demanding on the quality of the coolant, so they are recommended to be installed only in autonomous systems of apartments and private houses.
In conditions where the chemical composition of the coolant and the degree of its purity cannot be controlled, such batteries will not last long.
For autonomous systems, this type of radiator is quite popular, as it has many positive characteristics, has a presentable appearance and, in addition, is affordable.
If the operating rules are properly followed, manufacturers guarantee trouble-free operation of these heating elements for up to 20 ÷ 25 years. This is exactly the period of their operation that is indicated in the passport, and since the minimum time is usually set there, one can assume that the battery can last much longer.
Aluminum batteries are designed for coolant heated to 90 degrees, withstand a system pressure of 17-18 bar, and have an enviable heat output - up to 210 W, while the internal volume of the section of this type of battery is 450 ml, and the weight is only 1.5 kg.
The number of sections can be changed depending on the area and degree of thermal insulation of the room.
The figure shows the connection of individual elements into a single structure. The most popular are batteries with an interaxial distance of 500, 350 or 200 mm. There are also high vertical options, reaching 1500 -2000 mm.
You definitely need to know the negative and positive qualities of this type of radiator.
- The advantages of this type of battery include high heat transfer, ease of installation, cost-effectiveness, decent design, and convenient sizes.
- Experts attribute the negative aspects to the fact that the main heating occurs along the ribs of the sections. The possibility of gas formation in certain areas cannot be ruled out, which often leads to internal damage. In addition, if all existing installation rules are not followed, leaks may occur at the connections.
The solution to the problem with internal gas formation will be to install an automatic air vent on each of the batteries, which will work if necessary.
Depending on whether the radiators underwent special treatment at the production stage, they may have anti-corrosion protection or be produced without it.
When choosing, you should definitely take an interest in this factor - there are radiators made of highly purified aluminum that have undergone anodization, which protects the structure of the material from corrosion.
Such batteries are able to withstand pressure of 65-70 bar and have higher heat transfer than those that have not undergone such treatment.
Source: https://remont-system.ru/radiatory/preimushchestva-i-nedostatki-vertikalnyh-radiatorov-otopleniya
Variations and performances
The range of heating batteries is extensive. There are also apartments with a centralized system and a private house with autonomy. It is most correct to call vertical radiators high varieties of heating devices. Their main feature is their dimensions – their height is much greater than their width.
Structurally, in stores you can find both sectional and non-separable monoblock vertical batteries. And according to the material they can be:
- cast iron;
- aluminum;
- steel;
- bimetallic.
After all, with such dimensions, a device made of heavy cast iron weighs a lot. But all other materials are widely used. For any heating system and features of the chosen style, there is a device in a vertical design.
In addition to connecting from below, tall batteries are connected, like all other analogues, in a lateral and diagonal pattern. But it is the lower liner that allows you to hide the heating pipes so that they do not spoil the interior with their ugliness.
What size of wall-mounted water heating radiator to choose
If we talk about the dimensions or dimensions of vertical radiators for an apartment, then they are less limited. Horizontal type batteries should be placed in a niche under the window. There are certain requirements that are important to comply with in order to have maximum thermal output.
Popular height formats range from 1200 – 1500 and up to 2000 mm. Large panels are used in rooms with high ceilings and specific “concrete jungle” rooms:
- loft apartments;
- apartments with panoramic views;
- housing with “French” windows (low window sill);
- apartments with hinged balcony doors with glazing.
Vertical wall-mounted thermal units have fewer format restrictions. Of course, compact designer panels are easier to integrate into interior design. But tall and deep models give off more heat, provided that they are not dirty and connected correctly.
How to choose a vertical radiator based on its thermal power
Heating devices made from different metals have different heat capacity indicators, and the efficiency depends on their shape. Therefore, it is important to take into account not only external parameters, but also all these relationships when choosing one or another vertical model.
Note! The technical description for each product indicates the thermal output. The ratio of calories supplied must match the footage or volume of heated air in the room.
In some cases, it is necessary to combine horizontal and vertical batteries to provide full heat.
These are corner rooms in houses without external insulation with an open loggia. An additional vertical block behind the balcony door, as in the photo, will add warmth on cold winter evenings.
Important! To carry out the most accurate calculations of the ratio of heating devices and battery format, there are special formulas and computer programs. They include all coefficients and amendments regarding footage, climatic conditions of the region and other housing parameters.
Advantages and disadvantages
What awaits apartment owners who decide to install vertical battery models? In terms of heat transfer, no surprises are expected. According to this indicator, both models differ little from each other.
pros
Vertical batteries have several undeniable advantages over horizontal models:
- Attractiveness of designs. Such models fit into any interior, so you don’t have to think about how to hide them.
- Large heat transfer area, due to which the air in the room warms up faster.
- Structures of this type can be installed almost anywhere, not just near a wall with a window.
- Light weight does not create problems during transportation and installation.
- Thanks to the various types of fasteners, you can choose exactly those that suit the characteristics of the load-bearing wall where the battery will be installed.
- The installation technique is so simple that vertical heating radiators can be easily installed independently, without the help of specialists.
Minuses
Such models also have many disadvantages:
- The air is heated unevenly. The main heat comes from the ceiling. The radiator itself also warms up better in the upper part, the lower part is always colder.
- Most of the heat accumulates under the ceiling of the apartment, so that even distribution of warm air throughout the room is impossible.
- High price.
In terms of heat distribution, a battery of the same size, but located horizontally, is much more efficient than a vertical one.
Features of installing high radiators
Connecting batteries of any format has a lot in common, regardless of the model type. Connection to the heating riser is made in different ways:
- diagonal (most effective);
- lateral (standard);
- bottom connection.
Helpful advice! Before purchasing, it is important to make sure what type of connection this model will correspond to.
Vertical panels are usually connected from below, but, if possible, it is better to weld the pipes to make a diagonal coolant supply. It will ensure the most efficient filling of the battery with warm water before returning to the return line.
With a lower connection, all recommendations remain the same as for horizontal cast iron accordions. But vertical models have one feature - the water pressure in the system should be enough to fully fill the heating equipment.
Source: https://birzhaplus.ru/vertikalnye-radiatory-otopleniya/
Products from different manufacturers
Manufacturers are developing new types, trying to improve the equipment. This is due to the great demand for vertical radiators, despite their high cost. The most famous brands offer products with the best characteristics:
Kermi
The German company presents batteries with an original design that are suitable for any room. Devices are manufactured with one or more bends, which contributes to a sufficient level of heat transfer.
Vertical radiators are installed in residential and administrative premises. Thanks to the new Therm X2 technology, the front and rear panels are linked in parallel. In this case, the coolant fills them simultaneously.
As a result, the radiator heating time is reduced by 25%. The corresponding adapters provide a wide choice of thermostat heads. Lacquer finish with a two-layer coating that does not emit harmful substances when heated.
Arbonia
Vertical type batteries with top and bottom connections from a Swiss manufacturer. Steel tubular and sectional types are suitable for heating residential and administrative premises. They are characterized by high performance and good heat transfer.
Work with media up to 180 °C. The outside of the material is treated with three-stage cleaning, primer, and coated with durable enamel.
An interesting solution from the manufacturer is to produce closed-shaped radiators, in the center of which there is a mirror surface, and on the side parts there are hooks for clothes. This approach allows you to add an unusual functional and design touch to the interior of the hallway.
Zehnder
A large Swedish concern that produces vertical bottom connection radiators made of steel. During manufacturing, the required number of pipes are welded to horizontal collectors using lasers.
The accuracy of the seams is controlled by a computer, which determines the reliability and high quality of the batteries. The design can contain from 2 to 6 speakers, depending on the specified power. In the standard type, all models are coated with heat-resistant white paint.
But there is variability in shades. The equipment is produced with a radius of any curvature, also angular types. For a two-pipe connection system it is equipped with a thermal valve and mechanical or automatic air vents.
Purmo
The manufacturer's assortment includes panel and tubular bottom-connection radiators, heated towel rails, convectors, and ventilation systems. High-quality painting protects the metal from oxidation.
When processing, batteries are immersed in a bath with a primer solution. Then a special composition is applied in an electrostatic field. The result is a reliable coating that adheres well to the metal and does not swell due to temperature fluctuations.
All models with a bottom inlet are equipped with a thermostatic valve that is configured at the factory. Any radiator can be produced without additional fins.
Perforated metal plates increase the percentage of radiation and reduce convective heat transfer, which is important for heating large areas.
Rifar
Vertical heating batteries made in Russia. The series is manufactured with center distances of 200, 300 and 500 mm. They are distinguished by increased heat transfer with a nominal power of 200 W, which is higher than that of foreign analogues.
Thanks to the connectivity at the bottom, all communications are hidden. Most equipment is produced of the bimetallic type.
The official service life is 25 years. To optimally set the temperature in the room, it is possible to add or remove individual sections.
The batteries are filled under high pressure with an aluminum alloy that has good casting properties. The resulting monolithic product has thin fins and looks aesthetically pleasing.
Copperi
Vertical radiators from Italy are an excellent addition to the most sophisticated interior, thanks to their design and wide range of colors. The reliable design ensures uniform heating of the premises in any frost.
The batteries are equipped with bottom or side connections, the housing is made of unpolished stainless steel, the heat exchanger consists entirely of copper. They are resistant to pressure changes, have low weight and compact dimensions.
The coating is done with powder paint under electrostatic influence. It is possible to design a matte, glossy or moiré surface, or apply a relief image.
Parameters and designs
Bimetallic, aluminum and steel heating radiators: technical characteristics. The height of vertical radiators of various types can reach 180 cm in height. And the width is determined only by the availability of free space and the required battery power. You can connect as many sections as you like together.
With the same dimensions, aluminum will have the highest heat transfer, followed by bimetallic and steel radiators. In general, the output power depends on the design features and the number of mounted sections.
Existing battery manufacturing technologies make it possible to give the heating device the most original shape. But, of course, you will have to pay a lot for designer delights. But this is the main advantage - the ability to give the room an individual style.
The main disadvantage of steel appliances is their high susceptibility to corrosion. Manufacturers are trying to mitigate this by coating the inside of the battery with various polymers. But steel is much easier to process and therefore you can find vertical radiators of non-standard shape on sale.
Plus, spot welding used in the manufacture of steel devices does not withstand water hammer, which is not uncommon in centralized urban systems.
Bimetal combines the advantages of steel and aluminum. The increased strength characteristics of the cast steel manifold and the high heat transfer of aluminum fins result in an excellent heating device.
Blitz tips
Vertical batteries made of polished stainless steel require constant surface care. Even the smallest mark or traces of water flow on the surface create a negative impression.
To clean, simply use a neutral detergent for shiny surfaces and a soft cloth.
The difference in temperature of such a radiator at the top of the device and at the bottom sometimes reaches 5-7 degrees Celsius. This temperature difference indicates good heat transfer and excellent battery performance.
The installation of a thermostat that allows you to regulate the temperature of the coolant can improve the operation of such a device and significantly save on payments for consumed resources.
It is useful to know that, unlike standard radiators made of aluminum casting, which have a wall thickness of only 1, vertical registers have a wall thickness increased to 2 mm, which significantly increases their service life.
To give the interior more dynamism, a flat vertical radiator can be decorated not only with an interior sticker, but also by ordering a special metal grille with a perforated pattern.
Such an overlay will not change the heat transfer of the radiator, but will give the room a new look.
How to choose?
The decisive criterion when choosing a heating radiator is its heat transfer. The power of the system is selected taking into account the area of the room, the presence and number of walls in contact with the street. You should also take into account whether the walls face the south or north.
For an apartment where the likelihood of water hammer occurring is higher than in a private house, it is better to choose cast iron or bimetallic products. For unusual interiors, you can choose designer radiators, while simple chrome-plated batteries will fit into almost any interior.
If we are talking about steel tubular products, then preference should be given to domestic options. They have a wall thickness of 2 mm and can withstand a pressure of 20 atmospheres. Foreign analogs can withstand pressure of only 15 atmospheres with a wall thickness of 1.5 mm.
Among steel elements, tubular systems are considered the safest. However, they also have vulnerable points - welds. In general, when using steel radiators, it is recommended to equip them with gearboxes that allow you to control temperature indicators and constant coolant pressure.
How much do vertical radiators cost?
It should be noted that the price of wall-mounted electric radiators for summer cottages depends on the specific model, power and manufacturer.
For example, the narrowest vertical heater, 27 cm long and 180 cm high, Arbonia from a German manufacturer, will cost the buyer almost 10,000 rubles. But the Verta vertical battery costs even more - about 40,000 rubles.
True, there are more affordable options. You can buy cheaper wall-mounted electric heating radiators from a Chinese manufacturer. But you shouldn’t focus only on price when choosing vertical devices.
Because at a low price you can buy low-quality or counterfeit equipment. But it’s also better not to buy too expensive radiators. The ideal solution would be to choose a battery with the best price-quality ratio.
Non-standard models of vertical batteries are not easy to buy. They are rarely found on sale. Mostly they are made to order. Therefore, prices for heating radiators of unusual configurations will be high.
Appearance of low heating radiators
Appearance of a low radiator
The modern manufacturing market offers various designs and color solutions for heating radiators. This type of product can also be selected according to the following parameters:
- to size;
- optimal length;
- convenient width;
- required power;
- and also by the number of sections.
According to technical parameters, this type of product is suitable for equipping heating systems of any premises. One of the undoubted advantages of these devices is the high-quality final finishing of the surface coating of heating radiators. This can be a specialized varnish, spraying or paint.
This nuance ensures resistance to corrosive processes, and this treatment does not require regular painting or other types of maintenance. High-quality devices in this area save up to 30 percent of material costs for heating needs.
Radiators are produced in a variety of versions to meet the different requirements and preferences of customers for this type of product. This assortment allows you to choose the most successful option for installing low batteries in a certain room, moreover, it is beneficial both during installation and is suitable for certain heating systems.
Bottom line
Vertical heating radiators are an excellent choice for heating a residential or commercial space.
A wide range of sizes and shapes of structures and a variety of materials will allow you to mount the heating device in any heating system, both autonomous and centralized.
Choose vertical batteries taking into account the functional features of the room and the climatic conditions of the region in which you live.
By choosing and installing the battery according to all the rules, following the recommendations, you can be sure that it will not only serve you for many years, but will also provide a warm environment in the apartment during the winter.
Source: https://obogrevguru.ru/obzor-batarej-otopleniya-vertikalnogo-tipa.html
Heat source
This equipment is also divided according to the source of coolant. There are two types. The first includes water that heats the gas boiler. In this case, such devices are called vertical water heating radiators.
The second type includes a coolant equipped with special oil. In this option, electricity is used to heat the heating devices.
- The latter option, compared to the first type of heat source, is more expensive for the family budget.
- Therefore, they are not particularly popular and are used more as an additional or temporarily replacing the first source of thermal energy.
Thanks to the built-in thermoregulation system, which allows you to use an electric radiator when the temperature drops.
