Infrared heating panels: types, operating principle, installation and operation features

The operating principle of infrared heating devices is so simple that one can only wonder why this heating method has become widespread only now. Plus, it is energy efficient and economical. However, many still do not know what infrared heating panels are or what the principle of their operation is.

You will learn everything about the types of IR panels, the specifics of their operation and advantages and disadvantages from the article we presented. We have described in detail the features of their installation and operation. Arguments were given to convince people to purchase infrared heating equipment for decorating their own home.

Operating principle of infrared devices

Heating a room with infrared radiation is a revolutionary method that treats not so much the air itself as the objects in the room. The IR source acts on space like the Sun on our planet.

All other heating methods (batteries, oil heaters, etc.) work on the principle of convection heating of air masses. That is, cold (unheated) air flows around a hot surface and receives heat from it. An increase in temperature entails a decrease in density, as a result, according to the law of physics, air rushes upward.

But we don't live on the ceiling. It is important for us that the comfortable air temperature is in the central and lower third of the room.

There is nothing complicated about the design of IR panels - it’s surprising how humanity didn’t think about their invention earlier! The infrared heat emitted by heaters is similar in power and structure to solar rays

A device that heats not the air, but floors, furniture and even your skin, is an infrared panel. Only after heating of these surfaces is heat transferred to the surrounding air. Heating of the room begins from below, thereby ensuring a comfortable temperature in the area of ​​human activity.

And now those people who are at least a little familiar with physics will have a logical question - why are the heat rays of IR panels not immediately absorbed by the air? This is the whole “trick” of these devices!

In the infrared region there are a kind of “black holes” where heat rays are weakly absorbed. The widest such “window” is located in the range of 8-13.5 microns. If thermal radiation has a wavelength close to it, the air throughput in this case is 80-85%, so IR rays reach the surface unhindered.

Optimal installation location for electrical thermal devices

In this regard, personal preference is crucial. There is no consensus on this issue: some people like wall mounting of infrared heating panels, others prefer floor or ceiling mounting. Considering that warm air always rises, installation on walls is not so effective. If you place heating panels on the floor, the air heated with their help will evenly heat the entire room, gradually rising to the ceiling. The operation of ceiling heating panels is approximately the same: in this case, everything depends on the convenience of the location.

Classification of IR heating panels

Depending on the criterion that is taken as the basis for the division, all infrared heating devices are divided into many classes of groups and subgroups.

1. According to the method of installation and design, they are divided into:

• Built-in. They are based on plasterboard, on which a heater (graphite thread) and thermal insulation are applied. A decorative protective screen is installed on top of it.
• Mounted. Made of metal, glass, heat-resistant plastic. The heater is encased in anodized aluminum or ceramic.

Built-in models are, as it were, “tied” to building structures or furnishings; wall-mounted types can be used as an independent interior element.

1. By type (location) of installation we can distinguish:

• Skirting. They have a long narrow shape, so they are mounted at the bottom of walls (at the border with the floor), under window sills, in niches, etc.
• Wall-mounted. They have a larger heat transfer area than baseboards. They are usually installed in the center of the wall. At the same time, they can be used not only in dry, residential premises, but also in outbuildings - even with high humidity. IR panels are not afraid of moisture and can even be placed in open outdoor gazebos, on verandas, etc.
• Ceiling. They are mounted, as you guessed it, into a suspended ceiling system, and this is their significant advantage. Firstly, they do not spoil the design of the room. Secondly, nothing interferes with the passage of infrared radiation, thus the heat is distributed evenly.

According to the principle of operation, all of the listed types do not differ. They are chosen based on the goals set for the arrangement and the tasks solved during the renovation of the premises.

IR panels built into the suspended ceiling structure are not “conspicuous”, do not take up a centimeter of usable space, and do not affect the interior design

1. Based on wavelength they are distinguished:

• Shortwave. It is characterized by heating above 300 ºС, therefore it is usually used at large-scale production facilities.
• Long wave. “Softer” ones provide a comfortable temperature in living spaces without harming the health of others.

Regardless of the type, infrared heating panels must be installed in such a way that the flow of infrared radiation does not encounter obstacles in its path. The best place for installation will be a section of the wall next to which there is no furniture or decorative items.

Best Infrared Wall Heaters

Infrared wall heaters are characterized by their low price and low energy consumption. They are compact, lightweight, easy to operate, can be easily mounted on a wall, and are suitable for residential and non-residential premises. Many devices have the ability to connect a thermostat, which allows the user to more finely control the temperature in the room.

The modern design and laconic white color of the body will allow the device to harmoniously fit into any interior and not spoil the appearance of the room.

6 Step mini 200

Today's rating opens with the STEP mini 200 heater. It is small in size and light in weight, made in the form of a thin white panel, the width of which is 59 cm, the height is 44 cm, and the thickness is only 2 cm. This compact design will harmoniously fit into any small room and will not burden the space.
The device operates from the network, power consumption does not exceed 200 W. Wall mounting is carried out using 4 self-tapping screws. The device is designed to heat a room with an area of ​​3 m2; it can be installed in an apartment or in a utility unit. The model does not make any extraneous noise during operation, is completely safe, and is resistant to water.

Many consumers were satisfied with the unit. It heats up quickly and helps save energy. At the same time, the device is capable of covering only a small space with heat. Among the disadvantages, we can also note the absence of a switch; therefore, in order to de-energize the model, you will have to remove the plug from the socket, and to turn it on, perform the opposite action.

Pros:

• Lightweight design.
• Easy installation.
• Fast heating.
• Classic design.
• Minimum power consumption.

Minuses:

• There is no switch.
• Small heating area.

STEP mini 200

5 Ballu BIH-APL-0.6

In fifth place is the Ballu brand model BIH-APL-0.6.
The company's activities are aimed at producing a variety of engineering and climate control equipment. She cares not only about the high quality of her products, but also about their safety. By introducing new technologies, the brand is actively growing and developing. The heater presented in our rating is made of durable steel, has high build quality and a pleasant design. Its power consumption is 600 W. The device reaches 88.5 cm in width and 4 cm in height. The device is capable of warming the air in a room of up to 6 m2.

To control the unit, the manufacturer has provided the ability to connect a thermostat to it. This way the user can adjust the heating temperature. An additional advantage of the model is the possibility of not only wall but also ceiling installation.

Buyers praise the model for its nice design, compactness and ease of installation. Many were satisfied with the speed of heating the room, but the power of the device was not enough for everyone.

Pros:

• Possibility of wall and ceiling mounting.
• Sturdy steel body.
• Light weight.
• Connection to thermostat.
• Doesn't take up much space.

Minuses:

• Some buyers did not have enough power of the device.

Ballu BIH-APL-0.6

4 Hintek IW-07

Hintek IW-07 is in fourth position in our rating.
The model has an attractive modern design, and thanks to the body, made in classic white, it can fit into any interior. The special design of the device promotes uniform distribution of heated air in space, without creating air flows. During operation, the model does not emit excessive noise and does not emit foreign odors, its surface does not heat up above 70°C, which means that accidental touching will not cause burns. In addition, the unit is equipped with overheating protection and is completely safe for pets and small children.

The device consumes power equal to 700 W, suitable for a room of 7 m2. If desired, you can connect a thermostat to it in order to maintain a comfortable temperature. The moisture-proof housing allows you to install the heater in rooms with high humidity.

Hintek IW-07 is significantly heavier than previous models from our selection, its weight is 5.5 kg.

Pros:

• There is protection against overheating.
• Even heat distribution.
• Moisture resistant.
• Heating of the case up to 70°C.
• You can connect a thermostat.

Minuses:

• Weight.

Hintek IW-07

3 Hyundai H-HC2-10-UI690

Our next participant Hyundai H-HC2-10-UI690 will help maintain warmth in residential and non-residential premises.
Its effect extends to a space of 12 m2 with an energy consumption of 1000 W. At the same time, the device remains compact, its dimensions are: width 162 cm, height 12.5 cm, thickness 4.5 cm, and weight only 3.5 kg. The device can be mounted on a wall or ceiling; the mounting hardware required for installation is included in the package. A special assembly protects the device from dust. Quiet operation and the absence of foreign odors will not cause discomfort while in the room. Directional heat distribution allows the model to be used for local heating.

According to reviews, the device is made of high-quality materials, heats the air well, does not create excessive noise and lasts a long time. Also among the positive characteristics are energy efficiency, easy installation and elegant design. In addition, the model does not burn dust, thereby reducing the concentration of oxygen in the air.

Pros:

• Can be mounted on the wall and ceiling.
• High power.
• Dust protection.
• Low noise level.
• Equipment.

Hyundai H-HC2-10-UI690

2 Resanta IKO-2000L

In the second position is RESANTA IKO-2000L.
Along with a chic modern design, this model has many other positive characteristics. First of all, it is worth noting that the device has a power of 2000 W and is designed for a room of 35 m2. This unit is intended for use in an apartment, garage, or warehouse. The ability to connect a thermostat will allow the user to adjust the temperature at their discretion. The device is wall mounted; mounting elements are included in the kit. A power cord is also included in the package. The heater weighs 3.4 kg. Buyers are delighted with the appearance of the model and praise it for its build quality and high performance. The device saves you from the cold, works quietly, and is safe for others.

The RESANTA company was founded in 1993 and currently produces thermal equipment, as well as measuring and welding equipment. The quality of products, as well as well-established service, allows the brand to occupy a leading position in the market, and the constant development of production technologies contributes to maintaining high demand.

Pros:

• Connecting the thermostat.
• Large heating area.
• Compactness.
• High quality.
• Stylish design.

Minuses:

• Heating of the rear wall of the case.

RESANTA IKO-2000L

1 Nikaten NT 300

Nikaten is a company that specializes in the production of infrared heaters and thermostats.
The narrow specificity of our activities allows us to produce equipment using modern technologies, guaranteeing high quality and affordable prices. The first place in the rating goes to the NT 300 model. This compact panel, made of ceramics, is suitable for rooms up to 6 m2. Special fastenings on the case allow you to quickly fix the device on the wall. Its dimensions: width 60 cm, height 40 cm.

The device operates from the network, power consumption is 300 W. Its surface heats up evenly, giving off its heat. The manufacturer has provided the ability to connect a thermostat to the device. With its help, you not only set the desired temperature in the room, but also significantly save energy.

Buyers highly appreciate the device for its quiet operation, attractive design and long service life. It promotes rapid heating of the air, takes up little space and is not afraid of moisture.

Pros:

• Compact sizes.
• Economical consumption of resources.
• Uniform heating of the panel.
• Quiet operation.
• Easy to install.

Nikaten NT 300

Scope of application and specifics of operation

IR panels work best with spot heating of a specific place indoors or outdoors. They work great in areas equipped for recreation near dachas and private houses, areas owned by cafes and small restaurants.

Most often, IR panel heaters are used as an additional heating source when it is necessary to increase the temperature in a specific place. For example, when it is necessary to “insulate” a recreation area in a large house or a work space somewhere in a warehouse or industrial facility.

The IR panel allows you to create an “island” of heat in large rooms. Their action is focused, aimed at a certain zone, or more precisely at objects located within it

As for heating commercial buildings in this way, it is very economical and convenient. With the help of panels, it is possible to create conditions for the most comfortable stay of a person in any specific area, without spending money on heating the entire room.

Weather conditions such as humidity or wind do not affect the radiation efficiency, so the panels perform excellently even outdoors.

In offices, infrared panels are often used as the main heat source. This solution is cheaper than installing your own mini-boiler room with solid fuel or gas equipment if the office is not connected to a centralized heating system.

IR heaters are more economical than oil-based heaters, electric heaters, etc., since radiant heating is the most economical among all types of electric heating. It is most profitable for offices to combine heated floors with IR panels mounted in the ceiling. Then you can maintain the room temperature at +20⁰С even in frosty weather.

Infrared heaters emit more than just heat waves. they can easily serve as lamps in the area of ​​entrance areas and in corridors, night lamps

Application of infrared panels

Heated thermal panels work well in a wide range of applications. Examples:

• heating of apartments, houses, holiday homes, winter gardens;
• heating of offices, conference rooms;
• heating of shops, service points, trading areas;
• heating of halls, warehouses, workshops, loading ramps;
• heating of exhibition and exhibition halls;
• communal heating;
• heating schools, kindergartens,
• heating of museums and galleries;
• heating of catering establishments;
• heating of hotels, sanatoriums, shelters;
• heating of hospitals and sanatoriums;
• heating of churches and places of worship;
• heating of sports halls, entertainment halls, sports halls;
• heating in zoological and botanical gardens;
• heating in livestock and crop production;
• heating in saunas, swimming pools and fitness clubs and much more.

Recommendations for installation

To install infrared heating panels, you do not need special knowledge or experience. The tools needed for installation are at the disposal of every owner. The documents for the device must contain step-by-step installation instructions. If you haven’t found it, go to the panel manufacturer’s website, there is definitely such information there.

Fastenings for panels are already included with them. If you have your own vision on this matter, you can choose the fasteners yourself. However, be sure to make sure that it can support the weight of the panel you choose to install.

Here are a few more nuances that it is better to know about in advance, that is, before installation begins:

• A larger percentage of manufactured panels are ceiling panels. Many of them are equipped with corner brackets, but not all. Therefore, pay attention to this point when purchasing. Swivel models are better because their working surface can rotate 30°.
• For rooms with high ceilings, models are produced that are suspended on chains. This allows you to control the radiation intensity and select the heated area.
• To calculate how powerful the heating system should be to warm the room with IR panels, proceed from the calculation - 1 kW per 10 m2.
• Mount the panels at the recommended mounting height, as most lower wattage panels heat the room more efficiently and evenly by eliminating blind spots and hot spots.

During installation, do not allow the heating surface to come into contact with flammable or flammable substances.

Ceiling infrared devices are supplied with a complete mounting kit. The package includes brackets, hooks and chains depending on the model

Take care of high-quality insulation of electrical wiring contacts when installing the device. Use plastic caps or electrical tape for this.

Operating principle

Infrared heaters differ from convective heaters in their operating principle - they do not heat the surrounding air mass, the radiation heats objects in the area of ​​operation of the unit. And the already heated floor, walls and furniture release heat into the air. Since solid bodies shield the waves emitted by the heater, the floor under the table in their path will not warm up, but the heated table itself will release the resulting heat in all directions. Although comparing infrared heaters with the sun is more of a marketing ploy, their radiation spectrum characteristics are similar.

Arguments for and against IR panels

Those who plan to install infrared heating panels at home naturally want to know not only about their advantages, but also about the points that may cause inconvenience. Therefore, below is an objective assessment of both the positive aspects and disadvantages of this heating method.

The following arguments in favor can be given in favor of infrared panels:

1. Impact resistance and increased strength. IR panels are not afraid of even shocks and falls. And all thanks to its shockproof body and heavy-duty materials.
2. Easy installation and simple operation. You just need to fix the panel on the wall or ceiling and plug it into a power outlet. This does not require any special knowledge, a welding machine, etc.
3. Low energy consumption. Firstly, there are no energy losses for heating the air. Secondly, IR radiation reduces the overall temperature of the space by 3-5 ºС, which allows saving energy up to 25%. That is, the air temperature is felt on average 5 degrees higher than the one shown by the thermometer when measured. And all because not only the air that is being measured heats up, but also the objects in the room and even the person himself.
4. Quiet operation. Such heaters will not “crack” or “gurgle”, which means they will not interfere with sleep and other vital processes.
5. Independence from power surges. Even if the voltage changes, this will not affect the operation of the heater.
6. Maintaining normal air humidity. IR thermal panels do not dry out the air, like other electric convectors, which make breathing difficult and dry out the mucous membranes. They do not allow air mixing (cold/warm), so dust caused by heated air masses does not rise.
7. Compact dimensions and lack of associated equipment. There is no need to install bulky pipelines, radiators, boilers.

However, quite often on the Internet you can find information about the dangers of infrared radiation and the negative effects it has on the human body. Such myths have no scientific basis.

Radiant heating benefits from the fact that it evenly warms the room without creating zones of “stagnation” of warm masses

On the contrary, in this sense they are “more useful” than other common heating methods, because:

• do not dry out the air or burn out the air;
• do not raise dust, since there is no convection;
• keep the body in good shape due to the slight temperature contrast.

In addition, such heaters are even recommended for people suffering from joint diseases, since they warm up the human body well, as a result of which inflammation and pain soon go away.

When long-wave infrared rays hit the skin, its receptors are irritated, to which the hypothalamus reacts, the smooth muscles of the blood vessels relax, as a result of which they expand.

Thus, IR rays help stimulate and improve blood circulation. Please note that they are completely harmless to the skin, unlike UV rays, which can even cause pigmentation changes. If you approach the use of IR radiation rationally, it will be difficult to find shortcomings.

Infrared heating panels are not harmful to health. On the contrary, they help cure joint diseases, and it’s not for nothing that they are used in medicine

In cases of poor quality maintenance and negligent use of devices, the following not very pleasant consequences are possible:

1. If installed incorrectly, the space will warm up in a different area that would need to be treated first. Infrared radiation is characterized by a clearly limited segment of action.
2. An infrared heating system does not always fit harmoniously into the surrounding space.
3. Excessive radiation can negatively affect electronics (TV, computer and other electrical appliances). However, it all depends on whether operating standards are met and what dimensions the room has.

Infrared panels are a new generation heating system. It provides safe and efficient home heating with minimal financial costs. You will not encounter any significant drawbacks when installing or using the panels, since they simply do not exist.

The best convector wall heaters

Convector heaters are good because they have high power, which means they can warm the air in a large room. There are both budget devices and more expensive ones on the market. Modern technologies make it possible to produce not only elegant, but also safe devices.

Our rating contains models that will allow you to control the air heating temperature yourself. Built-in thermostats with clear controls and a variety of modes will help achieve maximum comfort and save energy. At the same time, the units remain affordable.

6 Ballu BEC/EM-1500

The group of wall-mounted convector heaters opens with Ballu BEC/EM-1500. The device has an elegant design, compact dimensions and light weight. A power consumption of 1500 W allows the device to warm the air in a room up to 20 m2. The product is equipped with a thermostat, with which you can increase the temperature or, conversely, decrease it. The device is equipped with a safety system, thanks to which it switches off when tipped over, as well as in case of overheating.

The model is easy to use: it can be placed on the floor by installing 2 legs on the edges of the case, or fixed on the wall using the fasteners located on the rear panel. The unit operates from the mains; there is a special button with indication to turn it on.

The device saves many buyers from the cold. The device heats up quickly and heats the room well, operates silently, and the moisture-resistant housing increases its service life. Among the shortcomings are a short power cord and a flimsy mount at the legs.

Pros:

• Moisture-resistant housing.
• Overheat shutdown.
• Floor installation and wall installation.
• There is a thermostat.
• Power button with indication.

Minuses:

• Power cord length.
• Unreliable leg material.

Ballu BEC/EM-1500

5 Hyundai H-HV15-10-UI617

Hyundai H-HV15-10-UI617 is in fifth place in the rating. Thanks to its thoughtful design, the device generates a directed flow of hot air and effectively heats the air in a room whose area does not exceed 13 m2. It can be used at home, at work or in the country. The included legs allow you to install the heater on the floor, and it is also possible to hang it on the wall.

The power consumption of the device is 1000 W. In addition, it is equipped with a thermostat that will allow the consumer to adjust the temperature towards decreasing or increasing it. For safety reasons, Hyundai is equipped with an overheating sensor.

The model has an attractive design and quickly warms the air in the room. The unit is lightweight, weighing only 2.8 kg. Dimensions: width 46 cm, height 40 cm, thickness 8 cm. The quality of workmanship was highly appreciated by customers, however, many noted that the panel gets very hot, given that the device does not have wheels, moving it during operation will be problematic.

Pros:

• Heats the air quickly.
• Temperature change
• Light weight.
• Overheat protection.
• Workmanship.

Minuses:

• Strong heating of the case.

Hyundai H-HV15-10-UI617

4 Electrolux ECH/AGI-2500

In fourth position is the Electrolux ECH/AGI-2500.
This device has high power and a wide area of ​​influence. It involves both floor and wall installation. Despite its significant weight of 5.3 kg, the model is easy to move on a horizontal surface thanks to the wheels with which it is equipped. The heating power is 2500 W, it can be changed thanks to the presence of 3 modes. The impact area for which the unit is designed is 30 m2. In order to set a comfortable temperature there is a thermostat.

The model is equipped with a unit with an electronic control system. All necessary information is displayed on the display. It is possible to set a timer. The operating status is determined by the presence of an indication.

Consumers highly appreciated the efficiency of the device and its cost-effectiveness. The device quickly heats the air and is easy to control, creating the most comfortable indoor conditions. The heater operates silently and has increased mobility.

Pros:

• Large area of ​​influence.
• There are wheels.
• 3 modes.
• High power.
• Availability of electronic control.
• Doesn't create much noise.

Electrolux ECH/AGI-2500

3 Nobo NTL4S 20

Our rating continues with a Norwegian-made heater.
Thanks to the reduced temperature of the case and the overheating protection system, Nobo NTL4S 20 is safe to use. Its body is moisture resistant, which also increases service life. The smooth front surface of the device not only gives it an elegant appearance, but also prevents injuries upon contact with the model. The heater is designed for vertical mounting only. Its design minimizes the interaction of hot air flow with the walls, thereby protecting both wallpaper and any other covering from damage.

The power is 2000 W, the area of ​​the room that the device can heat reaches 28 m2. The temperature can be adjusted thanks to the presence of a thermostat.

Nobo has been on the market for over 70 years. During this time, it was able to gain the trust of consumers thanks to products that are characterized by consistent quality and long service life. The use of environmentally friendly materials and modern technologies allows us to create not only effective, but also safe products.

Pros:

• There is a thermostat.
• Economical consumption.
• Protective system.
• Elegant design.
• Power.

Nobo NTL4S 20

2 Stiebel Eltron CNS 300 S

In second place is the CNS 300 S model from the German company Stiebel Eltron.
The brand has been producing equipment since 1924. Constantly developing and improving production technologies, it improves the quality and reliability of its products. The heater presented in our rating has the following parameters: width 104 cm, height 45 cm, thickness 10 cm. The maximum heating power is 3000 W. The device is equipped with a switch and a thermostat, which allows you to regulate the temperature and thereby ensure economical energy consumption. The presence of 4 modes also makes it possible to maintain a comfortable temperature in the room for others. For example, eco mode automatically reduces air heating at night.

Installation of the model requires wall mounting only. The moisture-proof housing allows you to place the heater in the bathroom and also in the kitchen. During operation, Stiebel Eltron does not create any extraneous noise. The manufacturer did not ignore the issue of safety by equipping the device with an overheating sensor.

Pros:

• Fast heating.
• Economical consumption.
• Different modes.
• Easy installation.
• Beautiful design.

Stiebel Eltron CNS 300 S

1 Noirot Spot E-5 Plus 1500

The first place is occupied by the high-tech device Spot E-5 Plus 1500 from the French brand Noirot.
The model is equipped with a digital display, which is used to control the temperature regime. The overheating protection system allows you to use the unit continuously throughout the day. The built-in thermostat provides accurate temperature measurement and helps maintain it. The device can be installed on the floor, thanks to the wheels on wheels it can be easily moved on a horizontal surface. There is also a wall mount. The heater is designed for an area of ​​up to 20 m2; quick start-up is possible thanks to the high power of 1500 W.

The device is very popular among customers, who happily praise it. They highly appreciate the ease of operation, operating efficiency, safety, design and workmanship of the device. No noise, built-in modes allow you to stay indoors comfortably, and also significantly save energy consumption.

Pros:

• Availability of electronic display.
• There is a thermostat.
• Safe.
• Equipped with wheels.
• Waterproof housing.

Noirot Spot E-5 Plus 1500

“Question-answer” section

On the topic of infrared panels, you can find a lot of identical questions on the Internet, which are the first thing that comes to a person who decides to install them at home. We have consolidated the most common of them and prepared a kind of TOP questionnaire with detailed answers.

— How long will IR panels last me?

— Their average service life is 25 years. Whether they will work for you more or less depends on the mode in which you operate them and whether you follow the care rules.

— What is sold complete with the IR panel? Are any other materials or components needed for its installation and operation?

— The standard configuration of the device includes the heater itself and a wire with a plug. For subsequent installation and connection, you also need electrical wires, a thermostat in the socket, if it is not structurally provided for, automatic switches, magnetic starters and possibly other automatic devices (depending on the characteristics of the heating system).

You will also need brackets, dowels, screws, and self-tapping screws for fastening, but in most cases they also come as a kit.

— Do panels from different manufacturers have different dimensions or are the standardized dimensions the same for all?

— The length may differ - 1 m and 1.5 m. The first is on models with a power of 0.6 kW, the second is for 1 and 1.3 kW. The width and thickness are the same for all devices - 16.5 cm and 4 cm, respectively.

— What acts as a heating element in the panel?

— It is a low-temperature heating element mounted in an aluminum plate, which acts as a radiator.

— How much does the ceiling IR panel weigh?

— It all depends on the power of the model. For configurations at 0.6 kW, the weight is 3.5 kg, for power 1 and 1.3 kW - 4.5 kg.

— My ceiling is covered with plastic. Will the panel light it up? Does it get very hot?

— Its body practically does not heat up, as it is thermally insulated. Therefore, installation is possible on surfaces made of any materials. You don't have to be afraid of fire.

Infrared heating devices can be mounted on any surface. They work well with any building and finishing materials without the risk of fire

— Is it possible to leave the plates turned on unattended?

— Yes, if they are equipped with a thermostat. If not, it is not recommended to leave it unattended for a long time to avoid overheating of the room.

— How many thermostats do you need?

— One thermostat per room.

— How much electricity is consumed with such heating? If a model with a power of 1 kW will it “wind up” 1 kW/hour?

— If you approach operation wisely, then, of course, no. The whole secret is that to maintain a comfortable temperature, it is enough for the panel to work for 20-30 minutes per hour.

It is not necessary to monitor the operation of an infrared heating panel equipped with a built-in thermostat or similar device in the outlet. It will turn off automatically when it reaches the temperature selected by the owner.

If you install a thermostat, the heater will not work constantly. It will turn on as needed. If the heating operates for 20-30 minutes per hour, electricity consumption will be from 1/3 to 1/2 of the device’s power.

Owner reviews: advantages and disadvantages

Prices: summary table

Wall-mounted infrared heaters are an excellent alternative to their predecessors, traditional radiators. Suitable for main and auxiliary heating. A modern energy-saving heater is profitable to buy despite its initial cost. Stylish design fits perfectly into any interior.