TOP 15 best heat guns: 2021-2022 rating: which safe electric model to choose for the garage and cottage

The peculiarities of the harsh Russian climate encourage us to look for optimal solutions for additional heating of the home. This is especially true for houses with an old layout, where the heating system is not able to fully warm the rooms.

Residents of modern houses are luckier. However, they cannot do without thermal devices during seasonal heating breaks.

Therefore, the climate control technology market is rapidly developing and offers consumers a wide variety of heating devices.

Heat guns are becoming increasingly popular these days. Tips for choosing and rating the best electric heat guns of 2021-2022 will help you make the right choice.

What to look for when purchasing

Guns differ in the method of application (domestic and industrial), fuel consumed, method of air heating, power and performance.

In order to choose the right device, you need to clearly understand for what purposes it will be used. Gas guns are used for industrial buildings. Diesel engines are purchased for heating production facilities with good ventilation.

Electric heat guns are always a priority for home use. There are many facts confirming this:

• – electric heat guns do not take up much space, are mobile and versatile;
• – safe because they do not use open flames;
• – have virtually no noise;
• – do not require fuel, do not create an unpleasant odor;
• – excellent ratio of efficiency and cost of the product.

The range of thermal power of electric guns is very wide. There are household and technical guns. The power of technical guns ranges from 1 to 5 kW. Industrial – anything more.

Power calculation

To calculate the required power of a heat gun, you need to know the exact volume of the room, the quality of its thermal insulation and the temperature difference between the outside and the inside.

To calculate the volume, multiply the length of the room by its width, and then by the height of the ceilings. The average temperature is the arithmetic average of the climate temperature and the desired temperature inside the heated room.

With the quality of thermal insulation, everything is more complicated. It can only be approximately calculated. If the building that needs heating is made of wood or sheet iron, then there is definitely no thermal insulation there. With an uninsulated roof, a large number of windows and one layer of brickwork, the insulation in the room is called poor. A building with average thermal insulation has many single-frame windows and an uninsulated roof and walls. Good thermal insulation is only available in those buildings whose roofs are insulated and whose windows have double frames.

Next we use the formula:

P(kW/h)= V x ΔT x K/860

V – volume of heated air;

ΔТ – average air temperature;

K – heat loss coefficient.

The resulting number is measured in kilocalories. Next we convert them to kilowatts.

1 kW = 860 kcal/h. If the value you get is more than 17000, then the power of the gun should be more than 10 kW.

Which manufacturer should you prefer?

In domestic stores of heating equipment, electric guns can be found both imported and manufactured in Russia. In general, there is not much difference between them. Here you need to focus more on the power of the device.

But among the manufacturers there are also recognized leaders, for whose branded fan heaters you will have to overpay a little.

If you need a powerful and durable electric heating gun, then you should pay special attention to models under the brands Ballu (Netherlands) and Master (USA)

Fan heaters are produced by a fairly large number of domestic and foreign companies.

Among the main brands that have won the trust of consumers are:

• Ballu (a Dutch brand, but production is established in Russia);
• Master (USA);
• Timberk (Sweden);
• Inforce (Russia);
• Fubag (Germany);
• Quattro (Italy);
• Tropic (Russia);
• Resanta (Latvia).

Almost all manufacturers offer heat guns in a wide range of heating power and air flow. In the existing range of this equipment, there is always a model for specific needs, you just need to correctly assess the needs.

Taking an electric gun that is too powerful and then turning it off every few minutes so as not to burn yourself is not very smart and costly.

If you want to save money, you can make an electric gun yourself. For assembly you will need a heating element, housing material (metal sheet or pipe), a fan and a motor.

Choosing a gun for the garage and cottage

When selecting an electric heat gun model for utility rooms, living spaces, greenhouses and as a temporary heat source, the criteria indicated above are taken into account. They take a more detailed approach to choosing a device for a specific room, for example, a garage or a summer house.

A powerful and safe heat gun is needed for a dacha and garage

The space of the garage and cottage in the winter season requires maximum heating, carried out taking into account safety requirements. Therefore, the following features of devices and their installation are relevant:

• for a garage with an area of ​​more than 70 m2, devices with a power of 7 kW or more are required, and to connect them, an electrical network with a voltage of 380 V is required;
• a gun in a garage where flammable materials, wood shavings, and gasoline are present must be installed in a place free of things. It is best to secure this corner with metal sheets;
• a gun for a summer residence can have a power of up to 5 kW, which allows you to connect it to a 220 V network;
• the device stand must be stable to prevent the device from falling during operation;
• the unit must have a convenient handle for moving it from place to place.

The choice of devices for a garage or cottage is based on compliance of the characteristics with the operating conditions. If you need to heat a cold garage in winter, it is important that the device quickly warms up the room. This can be understood by the productivity or volume of air processed per hour, which is indicated on the packaging of the electric heat gun.

Energy-saving models of gun heaters

The choice of energy-saving options for heat guns is small, but such units are more efficient than conventional ones.

Energy saving is achieved through efficient operation and thoughtful design of the device

The operating principle of the device is that the design uses a special heating element - a hollow glass or nozzle through which heated air passes. As a result of this, a heat gun can heat 500 m3 for 1 hour, and a conventional device will heat about 300 m3 during this time. This increases the speed of creating the optimal temperature in the room.

What is it used for?

Heat guns are very powerful heating devices that can heat even large rooms in a matter of minutes. They also perform a drying function. Because of these features, heat guns are most often used for technical premises - warehouses, garages, etc. On average, a heat gun is 3-5 times more powerful than an electric convector. Considering this feature, it becomes clear why it is less often used in everyday life and residential premises.

A good electric heat gun can greatly raise the temperature in a room and dry the air well. Because of these features, it is used as a substitute for central heating. The need for it arises during construction work or in those rooms where there is no other heating system - in this case, you can raise the temperature to a comfortable level for a person only with the help of a gun.

One electric gun has greater efficiency and heating effect than several electric convectors or other types of heating. At the same time, the cost of such heating remains relatively low, so you can save money with it.

In practice, heat guns are used:

• In everyday life, heat guns are often used in garages. In winter, cars often freeze through. Using a gun, you can relatively quickly dry the car and heat it, and it will be able to start despite the low ambient temperature. Also, an electric gun is indispensable in those rooms where a person must work for a long time - workshops, garages, service stations, etc. By heating and drying the air, indoor conditions become comfortable and safe for humans.
• In construction, guns are used to speed up finishing and other types of work that require rapid hardening of materials due to temperature and dry air. For example, guns are used to speed up the drying of plaster. It can also be used in other works such as installing laminate and parquet. Some technological operations require warm, dry air, and a heat gun can provide it.

Fuel

They run on fuel and electricity. The fuel can be gas, gasoline, diesel or used engine oil. Burning fuel creates heat. Electricity is needed for its initial ignition and rotation of the fan, which distributes this heat throughout the area.

Diesel models are divided into direct and indirect heating guns. Units with direct heating have high efficiency (about 95%) and high toxicity of blowing: combustion products are blown out along with warm air. They burn oxygen and are used in well-ventilated areas or outdoors.

Combustion in indirect heating heat guns takes place in a separate chamber, and combustion products are discharged into the chimney. By installing a flexible pipe on it, you can divert the exhaust into a ventilation or window. Suitable for heating livestock farms, exhibition pavilions, workshops. The efficiency is lower than direct heating guns (approximately 60%).

RESANTA TDP-20000

• Operating principle: diesel
• Heating area – 200 m²
• Maximum air exchange – 621 m³/hour
• Maximum heating power – 20 kW
• Heating type – direct
• Fuel consumption 1.85 kg/h
• Overheat shutdown – yes
• Weight – 18 kg

Heat guns operating on diesel fuel are structurally more complex, as they require forced fuel supply, implemented by the spray principle. The burner itself constantly gets dirty, requiring maintenance, and there is a not very pleasant smell in the air. RESANTA TDP-20000 is a powerful direct-heating diesel gun, equipped with convenient wheels for moving it. The high-quality design has a spacious 24-liter fuel tank, which will ensure uninterrupted operation of the heater for 12-14 hours.

Design Features

Once you decide how much power is needed to effectively heat the entire area of ​​the room, pay attention to the shape of the heat gun body. On the heating equipment market, manufacturers offer two types - cylindrical and rectangular. They have their own characteristics and advantages.

The cylindrical model has an elongated metal body that looks like a pipe. A heating coil is installed inside, which provides almost instantaneous access to operating temperature. And the cylindrical body helps create a directed flow of heated air. The room warms up very quickly. This heat gun is suitable for drying surfaces. However, dust and debris sticking to the coil can cause odors and oxygen burning. Therefore, such a device is not suitable for residential premises.

The rectangular-shaped unit has a heating element as a heating source, which is much safer than a heating coil. Heating is not as fast, but it is more comfortable than models with a cylindrical body. The device can be used in residential and office premises. In addition, its body is not so bulky and does not take up much space.

Pay attention to the structural elements of the heat gun. If you are buying it for stationary use, make sure it has a stable stand - legs or pedestal. When the device has to be carried frequently, a handle should be provided. After all, the metal case heats up during operation, and in order not to burn your hands, you need to hold it by the handle.

Best models

We have compiled a rating of the best heat guns currently on sale. When compiling the list, we first of all paid attention to the quality of the gun, while taking into account its cost so that it corresponds to the characteristics. The list includes both inexpensive entry-level guns and powerful ones for continuous use and heating of large rooms.

Wester TBK-2000 (2 kW)

An inexpensive heat gun for domestic needs - heating a garage or living space. Suitable for warming up a frozen car. Prevents condensation and combats high humidity in the room.

• Advantages : inexpensive, economical electricity consumption;
• Disadvantages : the power is not enough for a large room.

Ballu BHP-P2-5 (4.5 kW)

This is a heat gun from the middle price category, which is suitable for heating medium-sized rooms. Can be used during construction and installation work, as well as for heating warehouses. Equipped with a thermostat and overheat protection function. There are several options for adjusting the operation.

• Advantages : high power, thermostat, overheating protection;
• Disadvantages : it cannot work continuously;

Ballu BHP-PE-5 (5 kW)

Another heat gun from the same manufacturer. It has a little more power than the previous gun, and at the same time costs a little less. It can work longer because its air exchange is slightly reduced. This does not affect the heating efficiency, but saves energy and protects against overheating.

• Advantages : high power, thermostat;
• Disadvantages : air exchange rate is slightly reduced.

Vulkan 6000 TP

A professional-grade heat gun that can be used to heat large rooms (up to 60 square meters in size). There are two operating modes. It has overheating protection and a thermostat to regulate the temperature.

• Advantages : very high power and heating area, thermostat and overheating protection;
• Disadvantages : high price, not suitable for a 220 V outlet.

AOEVO 15TP Thermia 15000

A high-power heat gun that can heat rooms up to 150 square meters. Designed for large warehouses or small production facilities. Powered by 380 V mains.

• Advantages : 15 kW of power, large heating area;
• Disadvantages : high cost, requires power from 380V;

Hyundai H-HG-20-U9005 (2 kW)

Compact heat gun from Hyundai with a power of 2 kW. There is a mechanical control to adjust the temperature. A special feature of the model is its waterproof housing, which allows you to use this gun in damp and damp rooms at any time of the year. Built-in overheat protection.

• Advantages : compact and lightweight, moisture protection, temperature control;
• Disadvantages : short cord for plugging into an outlet;

Ballu BHP-P-9 (9 kW)

A powerful universal heat gun that can be used for a wide range of tasks: heating residential and non-residential premises, drying air and drying cars. This gun is quite powerful, but at the same time relatively compact and light (for its size).

• Advantages : versatility, weight, price, power;
• Disadvantages : requires a 380V outlet, noise during operation.

How to make a choice based on operating time and noise level: reviews

Experts also advise paying attention to the duration of the gun’s operation. When heating a room, such devices must operate without interruption for quite a long time. An electric heat gun (220V), reviews of which you can read below, can have a value that looks like this: 24/1 or 24/2. In these cases, the work duration is around the clock with a break of one or two hours.

In order to make the right choice based on characteristics, consumers are advised to also pay attention to the noise level during operation, as well as the range of operating temperatures. Having familiarized yourself with the range of modern devices, you can understand that they are capable of operating at temperatures ranging from +5 to +40 °C.

Operating principle of the device

The essence of the operation of an electric heat gun is that it heats the air from the environment. To do this, a fan is installed inside the housing, which draws air inside the gun. A heating element is also installed in its body, which heats the incoming air. Next, the warm air leaves the cannon and rises upward using the principle of convection, displacing the cold air. Thus, there is a continuous circulation of air in the room and its constant heating. The gun uses electricity to operate the fan and heat the element.

Gas convectors

In addition to gas guns, gas convectors are excellent for heating a garage. During their operation, combustion products do not enter the room; the device can be used without human presence.

The operating principle of a gas convector is similar to a conventional cast iron radiator, with the difference that water does not flow inside it, but a fire burns.

Flue gases are removed and air is taken in using a coaxial chimney. Combustion products are removed through the inner pipe, and air is taken in through the outer pipe. The draft occurs due to the difference in the densities of the removed gases and the outside air.

There are also models with a conventional chimney, when combustion air is taken from the room.

Fuel combustion occurs in the combustion chamber using a burner. The burner is ignited by a piezoelectric element, which is powered by a battery. Electricity is not required to operate a gas convector. Due to combustion, the combustion chamber heats up and the air in the room around it heats up. To speed up and distribute heating evenly, some models have a fan installed.

Advantages:

• Possibility of operation without human presence
• Reliability
• Easy cold start and adjustment.
• Gas is a cheap fuel.
• Fast room heating

Flaws:

• It can only be placed near the outer wall (coaxial chimney).
• The need to install a chimney.

Advantages and disadvantages

Electric heat guns have many obvious advantages that set them apart from other similar heating devices. Among the main advantages we note the following.

• High level of security. Electric guns do not burn oxygen, they are the most fireproof and easy to operate. When installing them, you can do without creating a chimney or other means for removing exhaust gases. There are no flammable elements or fuel in the device; the built-in automation will simply turn off the power supply if there is a short circuit.
• Ease of use. Heat guns with an electric heating element only need to be connected to an electrical outlet. To increase operational safety, they are equipped with additional buttons for changing power. The thermostat ensures automation of heating processes and eliminates accidental overheating.
• Compact dimensions. Household electric heat guns are very small in size and often turn out to be much more convenient than fan heaters and heaters. The presence of carrying handles makes it convenient to transport such heating equipment to the dacha.
• Low noise level. Standard volume levels when the fan rotates do not exceed 35-55 dB. A heat gun makes much less noise than a vacuum cleaner or washing machine. This is convenient if you need to maintain silence during children's sleep and rest.
• High heating speed. The room temperature rises much faster than when using other appliances. This allows you to warm up a cottage or garage, basement, or factory floor to a habitable state in a couple of hours.

There are also disadvantages. Such a device consumes much more electricity than conventional fan heaters. The cost of paying bills increases significantly. The energy saving capacity of the equipment is not too great.

In addition, during operation of the device, the heating elements themselves often fail and require replacement.

Additional functions and capabilities of heat guns

Electric heat guns can be equipped with additional functions and capabilities that can significantly influence the choice of a specific model:

• Temperature adjustment . This function will allow you to adjust the operation of the device to certain conditions. For example, a stretch ceiling requires a certain temperature and overheating is undesirable.
• Power adjustment . Changing the power affects the blowing force of the fan: the higher the power, the stronger the fan will blow.
• Thermostat . The thermostat maintains the set temperature at the desired level and turns on the device when it drops, and vice versa turns it off when the room has warmed up to the desired temperature. Although the vast majority of heat guns are equipped with a thermostat, there are still models without this structural part.
• Ventilation without heating . This function allows you to start the fan without turning on the heating element. This may be necessary when the air is warm enough and the room needs to be dried. For example, this is necessary during finishing work, such as plastering.
• Overheat protection . The device will automatically turn off when the critical temperature is reached (each model has its own critical temperature threshold). This is especially useful in cases where it is impossible to control the operation of the unit.

• Engine shutdown delay . In models with this function, the heating element is first turned off, and the fan continues to spin for some time. Typically this time is 1 – 2 minutes. During this time, residual heat is dispersed throughout the room, and the heating element cools down faster. Relatively few models are equipped with this function. Of the good ones, we would like to recommend Ballu BHP-P-5 .

How to calculate the power of a heat gun - formula

Using the same values, you can estimate the maximum volume of the room that will effectively heat the device.
In general, the right choice begins with calculating the power. From this “stove” it’s worth dancing further. Otherwise, buy it “by eye,” and then you’ll write reviews like this on YouTube.

To visually estimate and understand what thermal power the gun will require, you can use the following table:

If you choose exactly this power, in just 1 hour the heating unit will be able to immediately raise the temperature by 15 degrees. Of course, if everything is fine with your thermal insulation.

The whole thing can be calculated more accurately using the following formula:

Vvolume of the room in m3Tdifference between air temperatures outside and the temperature that needs to be created inside, degrees CKcoeff. heat loss of the building860 figure for converting kilocalories/hour to kW/hour

Coeff. select heat losses based on the design of your building.

• K=3.0-4.0 - for buildings without thermal insulation

• K=2.0-2.9 - there is some thermal insulation (one-brick walls, a simple roof and a regular double-glazed window)

• K=1.0-1.9 - building with average thermal insulation (walls of 2 bricks, roof with standard roofing)

• K=0.6-0.9 - high thermal insulation (walls and roof with double thermal insulation, double glazing)

For example, let's take a metal garage with a volume of 90 m3 without any thermal insulation. The temperature difference is 30 degrees. That is, when it is -10C outside, you want it to be +20C inside.

Substituting the data into the formula, we find that to heat such a garage, you will need a gun with a power of at least 12 kW. If you have 3 phases, then you might want to consider an electric option.

If only phase-zero comes into the garage or there is no constant light at all, then you are straight ahead with a diesel or gas model.

Only after these calculations do not buy guns with a large margin, even if funds allow.

According to the instructions, each such unit has a minimum volume of heated space. If you have clearly less, you will have problems with noise, rapid oxygen burning, dizziness, etc.

There are three most common types of heat guns:

• gas

• diesel-kerosene or multi-fuel

• electric

What power should the gun be?

How to choose the right heat gun for your home based on power? Power affects the size of the room the device can heat and for how long. There are average power calculations for the heated area. Typically, for rooms with a ceiling height of 2.5 m, the following ratio of power and area is taken: 100 W of thermal power is required per 1 m2. For example, if you need to heat a garage of 15 m2, you need to choose a heat gun with a power of at least 1.5 kW.

If you need to warm up a box with high ceilings, then it is better to calculate the power based on the volume/power ratio: 2.5 m3 = 100 W. For example, you need to heat a box with an area of ​​30 m2 with a ceiling height of 4 m. Then you will need a device with a capacity of: 4 * 30 * 100 / 2.5 = 4.8 kW. So, you can take the Resanta TEPK-5000K with a power of 5 kW. You should not take power “for future use”, because the higher it is, the more expensive the device.

Which heat gun to choose for suspended ceilings? In order for the film to lay clearly on the ceiling without sagging or stretching, it is necessary to warm it evenly to 60° C. A device of 3 - 5 kW is suitable for a living room, bathroom or bedroom. For unheated new buildings, it is better to take a gun up to 10 kW.

Rating of the best electric heat guns

Let's look at several models that occupy leading positions in customer reviews.

BALLU BHP-P2-5

Power: 4.5 kW

Capacity: 400 m3/hour

The gun can operate in non-heating mode. A stainless steel heating element is used as a heating element. Heat guns have protection modes against overheating and electric shock.

ADVANTAGES:

• decent power
• mobility
• convenient carrying handle
• presence of a thermostat
• normal ventilation mode
• works from a regular 220 V outlet.

FLAWS

• not detected

BALLU BHP-P2-5

PECAHTA TEPK-2000K

Power: 2 kW

Productivity: 120m3/hour

The gun is equipped with an overheat shutdown system. Possibility of temperature adjustment. Mechanical control, supply voltage 220V. The recommended heating area is up to 20 m2.

ADVANTAGES:

• compactness (size 20*22*17 cm)
• durable handle for easy movement
• two power levels
• fan mode, temperature maintenance
• not very noisy
• The gun body is coated with an anti-corrosion compound

FLAWS

• short wire (1.5 m.)

PECAHTA TEPK-2000K

BISON ZPT-M1-3000

Power: 3 kW

Capacity: 230 m3/hour

The gun is renowned as “the safest on the market.” It is compact and yet equipped with additional security systems. You can switch to fan mode.

ADVANTAGES:

• good power and heating speed
• double body
• vertical tilt adjustment
• quickly heats the room
• not noisy
• The regulator allows you to turn off the gun, turn on the fan mode or select the heating power of 1.5 or 3 kilowatts.

FLAWS

• short power cord (1 m.)

BISON ZPT-M1-3000

PATRIOT PT-R 3S

Power: 2KW

Capacity: 160 m3/hour

The supply voltage is standard – 220V. There is an operating mode switch, a thermostat, and a fan mode. Equipped with an overheating protection system. The area of ​​the heated room is up to 30 m2.

ADVANTAGES:

• high build quality
• compactness
• power adjustment
• overheat shutdown
• ceramic heating element

FLAWS

• weak air flow

PATRIOT PT-R 3S

TIMBERK TIH RE8 3M

Power: 3KW

Capacity: 230 m3/hour

Heating element heating element. Ventilation, intensive and economical heating mode. Compact size, versatility and ease of use. Overheating protection system.

ADVANTAGES:

• high quality steel case
• power and temperature adjustment
• resistance to falls and shocks
• ease of movement (size and weight are small)
• the air warms up quickly
• works from 220 V.

FLAWS

• not detected

TIMBERK TIH RE8 3M

HYUNDAI H-HG5-25-UI663

Power: 2KW

Performance:

The gun turns off when it overheats, allowing you to regulate the temperature. Mechanical control. Manufacturers recommend it for rooms up to 30 m2.

ADVANTAGES:

• design
• indication of switching on and operation
• built-in thermostat
• durable wheels for moving
• heats up quickly and evenly
• consumes little electricity

FLAWS

• not detected

HYUNDAI H-HG5-25-UI663

WESTER TB-3000

Power: 3KW

Capacity: 300 m3/hour

The body is made of sheet steel and coated with a polymer composition. An emergency system against overheating is installed. The manufacturer promises quiet operation without releasing harmful substances into the air.

ADVANTAGES:

• temperature and power adjustment
• automatic shutdown when overheating
• easy start
• ventilation mode without heating
• heats the room quickly
• not loud

FLAWS

• not detected

WESTER TB-3000

Customer Reviews

Yuri D.

Resanta TEPK-3000K

Experience of use: less than a month Advantages: The air blows hot, but not critical, the hand is tolerant. It looks decent from the outside. Disadvantages: When initially turned on, it made a lot of noise, quickly overheated and turned off. I thought about returning it, but decided to take a chance and figure out the reason myself. As it turned out, the fan blades were installed incorrectly during assembly. After turning it over, the grinding noise disappeared and it started working normally. A full inspection will begin at the dacha. Comment: Received my order the next day. The packaging is good.

Timur G.

PATRIOT PT-R 3S

Experience of use: less than a month Advantages: Beautiful appearance, build quality and most importantly everything works, convenient controls, everything is thought out. It’s clear even without instructions, and this is very important for a Russian person, since we usually read the instructions after plugging in the device. Disadvantages: I didn’t notice while everything works and even heats up. Advantages: Convenient, compact, easy to use, the flow of warm air is enough to heat a room or office.

Yuri Lakur

Ballu BHP-P-3

Experience of use: less than a month Advantages: In an old village house it heats well for several hours, but not without the help of a Russian stove. It works quietly. Disadvantages: It takes a long time to warm up, it takes a long time to heat the room. Comment: For 4190 rubles, an excellent option for heating air in tandem with something else, very easy to use, can be used for days, fireproof, made with high quality. For those who in cold weather need to heat a room of about 30 square meters, take a more powerful one if the wiring allows or gas , this gun is not quite suitable.

Andrey Sazhin

Ballu BKX-3

Experience of use: several months Advantages: Warms well. Due to its small size, there is a flow of hot air. I try to keep it away from plastic and fusible objects. Disadvantages: Strong smell when working. Perhaps it will disappear over time. The flow is of hot air. I would like the fan speed to be a little higher. Comment: Bought to warm up the car interior in cold weather. Small, convenient, takes up little space. Perhaps over time the specific smell will disappear. While I'm afraid to leave it unattended for a long time, the first impression is positive. When choosing, the main thing was functionality, not build quality or appearance. Build quality is 4, appearance 4 out of 5. It copes with the assigned tasks.

Timur G.

Resanta TEPK-3000K

Experience in use: more than a year Advantages: Connection to a standard 220 V network, suitable design for installation at heights with small surfaces. Disadvantages: None. Comment: We use cannons for drying products (warehouse), it creates useful ventilation heat between the racks, it is convenient to use locally in certain areas. There is a thermostat that maintains the desired temperature in the room, compatible with the main heating - practical when loading. We take it for outdoor trading, it heats well in a ventilated tent.

Egor K.

Ballu BHP-ME-5

Experience of use: several months Advantages: stainless steel heating elements. There is a thermostat to maintain the temperature. Housing with anti-corrosion treatment. Several power levels. Ventilation mode without heating. Disadvantages: to move it you need to screw the handle Comment: I took the gun to heat the workshop. It is light and compact and does not take up much space. The room is warm and heats up quickly. Thanks to the heat shield, the case does not get very hot. It works not loudly, without vibration. It's good that there is a thermostat, she is not afraid of overheating.

Dima N.

Ballu BKX-3

Experience of use: more than a year Advantages: Small size 2 operating modes at 1.5 and 3 kW Looks like a high-quality assembly, the materials feel pleasant Price The product meets my expectations Disadvantages: Efficiency decreases to almost 0 at temperatures of -15 and below. Comment: To be honest, there has never been a heat gun. So I decided to try to buy it. I’ve been using it for 2 years at the dacha. The average size of the premises is 15 m2. If the temperature outside is about zero, then it’s just a great option - turn it on, leave for 2 hours, come back already +18 in the room. The bathhouse is generally luxurious, 1-2 hours and a warm room. Humidity reaches 100% and the device works. If you need something in the garage, I put it 2 meters away from your hands and it’s 2 times more comfortable to work with. I noticed that the effectiveness of the gun greatly depends on the air temperature. If, say, it’s -15 or below outside, there’s practically no point in using a cannon: it moves air perfectly, but it will take 7 hours, or even more, to warm up even a small room. Here it is only available in conjunction with a stove. When the temperature rises a little, then it’s a matter of 1-2 hours. However, you can’t expect anything else from such a little thing. There are no vibrations, no cracks, clicks, or squeaks. It stands in the corner, you can’t hear it, you can’t see it, only warm air blows. I didn’t expect this at all, after reading reviews about the Ballu equipment in general, they say it’s falling apart and falling off before our eyes. For me, on the contrary, it works for wear and tear, works all day long. Once the gun worked for 3 days in 3 kW mode. Then she turned off. Well, I thought the expected end had come... but that was not the case! The device stood for about 40 minutes and turned on again. Until now, the gun looks like new - the radiator is clean, there is no dust anywhere, the paint shines like on a counter, even the front grille, which gets so hot that you can’t touch it... factory paint, without any hint of signs of use. As a conclusion: the gun’s capabilities are not limitless, perfect Suitable for relatively low temperatures, in small rooms up to 25m) Therefore, choose carefully according to your needs. Otherwise, it works 100%. The price is just great. After 2 years of constant use, it has completely retained its presentation. No defects appeared. It doesn’t suit me well for the garage, apparently I’ll have to buy a full-fledged gas gun so that I can work in the heat

Ivan P.

Ballu BHP-P-3

Experience of use: several months Advantages: two heating modes, compact and convenient, handle for carrying, heating element made of stainless steel, can work 24/7, double wall of the case does not allow to get too hot, economical, ability to change the angle of inclination, protection from overheating and damage electricity, thermostat. Disadvantages: none found. Comment: I bought two of these guns during renovations in a private house, helping to heat the rooms and speed up the process of drying the walls. After renovation I use it to heat the garage and warehouse.

Oleg Petrov

PECAHTA TEPK-2000K

Experience of use: several months Advantages: the noise level is low, as is the electricity consumption, quickly heats the room Disadvantages: noticeably dries out the air Comment: I bought it for a double garage, the total area is about 48 sq.m., the ceiling is 2.4 meters. Such a room heats up to sub-zero temperatures quite quickly. Of course, I would like it to be even faster, but if you direct it to the work area, it’s quite comfortable. I think if the manufacturer makes the place where the air is blown out narrower, then the gun will probably heat up faster. Otherwise, a good and inexpensive heat gun.

Kolya P.

Ballu BHP-ME-5

Experience of use: more than a year Advantages: Increased service life of heating elements made of stainless steel. Durable anti-corrosion coating. Compact and lightweight. The temperature difference at the inlet and outlet is 34 C. Disadvantages: Structurally, the angle of inclination does not change. Comment: Heats a drainage pumping station with an area of ​​40 meters during pump maintenance and engine replacements. The room is damp, there is no other heating. There is a three-pole socket in the panel via a circuit breaker (25 A), and a plug on the gun cable. They came, stuck it in, smoked - you can work without outerwear. Surprisingly, after three years the paint didn’t even peel off.

Ilya K.

BISON ZPT-M1-3000

Experience of use: less than a month Advantages: Assembly and materials Two modes of operation (full and half) Ability to aim the gun at the desired point Comfortable handle Disadvantages: The fan is weak for full mode, for 1/2 it’s ok. A stream of hot air is felt only at a distance of 1 m, then the heat simply rises upward, and there is no more flow. The effect of the gun is weak - At full power there is a fairly strong temperature gradient, after 15 minutes - it’s very hot at 1m from the gun, at 7m it’s warmed up a couple of degrees. In general, the power of the gun is suitable for quickly warming an apartment of 60 m2, when it is +6 outside the window and the heating has not yet been turned on, or a room in a private house or country house with positive temperatures outside the window and good thermal insulation. In winter it will puff too long. Comment: Other reviews wrote that the wire gets hot even at half power - this is not entirely true, the gun worked at 1/2 for several hours in a row and the wire was at room temperature. But at full power the wire is really warm along its entire length, which is annoying. The wire is quite thick, but perhaps they saved on the material; on the Internet you can buy a normal 16A cord with a Euro plug and grounding for 300 rubles, the device itself can be disassembled as simply as possible. Sockets, wiring and circuit breaker must be at least 16A. At half power the current is 6.9A (1500W), at full power 12.9A (2800W). The mains voltage is 217 volts.

Andrey Karpovich

PECAHTA TEPK-2000K

Experience of use: several months Advantages: — Small, takes up little space. — Quite a nice appearance — Lightweight — The cable, although a little short (about 1 meter), is quite enough for my needs — The case does not heat up — Easy to operate — 3 modes Disadvantages: — Lacks a timer — Weak flow Comment: At the time of writing I've been using it for 5 days now, I'm happy with everything. I bought it to heat a loggia (4 sq/m) since it is not insulated. Such an area is heated to a comfortable/room temperature in 15-20 minutes, taking into account that the approximate temperature in the room is +4 - +5. Please note, if you need to heat a room where the temperature is sub-zero or close to zero, then this mini-gun is unlikely to cope with this task, I advise you to take a more powerful model. Initially I didn’t expect much from a budget model, but in the end this model is quite enough for my modest needs

Which heat gun to choose?

The main differences between guns on the market today are their power and performance. This is the reason for the global price difference. When using a gun at home, it is advisable to look for the presence of a fan function and temperature control.

If the gun will operate constantly, then an overheat shutdown function is necessary for safety reasons. Each of the options presented above is durable and is the undoubted leader among its category. All that remains is to choose the appropriate one according to the parameters.

The most important factor when choosing a heat gun is the volume of the room for which it is intended. Calculate the volume of the room using the formula above, read reviews for each of the specific options, choose a device “by size”. If you choose a gun whose power is less than necessary, then most likely you will not be satisfied with its productivity.

When choosing a gun whose power is higher than required, the gun will do the job faster, but its price will be noticeably higher. Pay attention to compactness, safety, quiet operation and ease of use, then you will find the best option at a competitive price.

How to choose

Where do you use a heat gun?

In everyday lifeIn construction

First of all, you need to decide what it will be used for and in what rooms. The larger the proposed premises, the more powerful the heat gun is needed. For a small garage, an inexpensive low-power heat gun is suitable, but for serious heating of warehouse space you need to buy a more powerful gun. It is also worth considering what it will be used for - only for heating or also for drying the car or finishing materials.

Heat guns differ not only in power, but also in the amount of power they consume from the outlet. For domestic purposes, you need to choose a 220V gun, but for industrial or construction purposes you should think about a more powerful gun that can consume up to 380V. Electricity consumption also depends on power - if the goal is to save as much money as possible on electricity bills, then it makes sense to choose a less powerful gun or a gun with a thermostat that can regulate its operation.

Guns from different power categories also differ in weight and dimensions. This is not of particular importance if the electric heat gun will be used to heat a specific room, but it can also cause problems if the gun is planned to be moved from place to place or for the purpose of drying a car or during construction work.

Choosing a heat gun is not the most difficult task, but it must be taken seriously as it will determine whether it will suit your needs.

Parameter No. 2: heating element

To choose the right electric heat gun, pay attention to the type of heating element - the safety, efficiency and reliability of the temporary heating system will depend on it. Modern devices can be equipped with three types of elements:

• An open metal spiral is the simplest, cheapest, but also the most dangerous option. The coils heat up quickly, but due to the exposed hot surface they can create fire hazards; they often burn out and require replacement.
• The heating element is the same metal spiral, only closed. The heating element is hidden from external contacts by a tubular casing, which prevents dust combustion and air drying. Heating element is the most popular design option for an electric gun, which many buyers consider the “golden mean”.
• Ceramic plates are the most advanced, but at the same time expensive, heater option. They have high efficiency at moderate operating temperatures and a high level of safety.

Important! Ceramic electric heaters reach optimal operating temperatures more slowly, but last longer than heating elements and coils.

Heat gun Master B 5 ECA with heating element

Characteristics:

• thermal power – 2.5/5.0 kW;
• air flow parameters – 557 m3/h;
• number of heating elements – 2;
• degree of protection IP – 4;
• heating method – direct;
• operating temperature indicators – 5-35 °C;
• supply voltage – 380 V.

The cost of the model is 6,100 ₽.

The compact, lightweight fan heater is equipped with a heating element made of stainless steel of the highest quality. It has a long service life, prevents the combustion of dust and small debris, does not burn oxygen and provides efficiency of up to 100%. Thanks to the built-in thermostat, the device maintains a stable temperature in the room according to the specified parameters.

Advantages of the model:

• built-in overheating thermostat;
• long-term uninterrupted operation;
• reasonable price;
• durable metal case;
• instant heating;
• low noise level.

Minuses:

• small heating area;
• Use is only possible in electrified areas.

How to make your own electric heat gun

You can make an electric device for heating a room yourself. The simplest design consists of a heating element, a fan and an electric motor. All this is hidden in a metal case. The most difficult stage is the development of an electrical circuit diagram. To avoid mistakes, you can use ready-made options that can be found on the Internet. Most often, in a circuit, thermostats and a toggle switch are connected in series. The circuit is closed on the electric motor and heating element.