TOP 7 best floor-standing gas boilers made in Russia + which one is better to choose

Heating a home is one of the basic life support tasks.

Unlike European residential premises, where operating conditions for the heating system are easier, in Russia it is necessary to have a powerful and efficient heating circuit.

Since the capabilities of the system are determined by the characteristics of the boiler, working in complex and harsh conditions requires a special approach to the development and production of heating equipment.

Most domestic manufacturers follow exactly this path, considering primarily reliability and resistance to external loads.

Let's take a closer look at this issue.

On smartphones, you can scroll the table right/left ↔

What types of gas boilers are produced in Russia

Russian manufacturers produce an almost complete list of designs of gas heating boilers. They have a lot of varieties and options in their arsenal.

By feature set:

• single-circuit . Designed only for heating the coolant and supplying it to the heating system;
• double-circuit. In parallel with performing the basic function, these units are capable of preparing hot water for domestic needs.

By installation method:

• wall-mounted They are installed in a hinged manner on strong (load-bearing) walls or special structures - ramps. The specifics of installation require boilers to have limited weight and dimensions, so the power of wall-mounted boilers is relatively low;
• floor They are installed directly on the floor, so there are no weight restrictions. This allows the use of powerful and massive units and parts. The power of floor-standing units is the highest. In addition, they can be connected in a cascade, obtaining total indicators close to those of serious thermal stations.

By type of combustion chamber (burner):

• atmospheric, or open . Air is taken directly from the room, and smoke is exhausted naturally, through a traditional chimney;
• turbocharged, or closed . For combustion, air is supplied using a special fan. Excess pressure arises in the combustion chamber, displacing smoke out through a horizontal coaxial chimney. Fresh air passes into the boiler through the outer pipe, and combustion products are removed from the boiler through the inner pipe.

By power supply method:

• volatile. As a rule, these are boilers that are more or less exact copies of European models. To work, they need a connection to the power supply;
• non-volatile. They operate exclusively on a mechanical principle, which makes them most preferable in conditions of unstable power supply. The disadvantages are the use of natural draft and coolant circulation, which do not allow the development of the given power . However, these problems are easily solved by connecting external devices, and the ability to provide continuous operation in any conditions remains.

Russian manufacturers also produce parapet boilers. They are able to heat rooms without a radiator system, distributing thermal energy using the convection method.

Such designs are convenient for heating apartments and other rooms of relatively small area.

NOTE!

Non-volatile floor-standing boilers are considered the most popular and promising. They have high power, are capable of providing basic functions (heating and hot water supply), and do not have unnecessary components. This makes the units reliable and resistant to any external influences.

Why is it worth paying attention to domestic products?

Of course, one cannot deny the numerous advantages of heating boilers produced by European and some Asian companies. However, all imported models have one drawback in common - high price.

At the same time, the production of domestic heating units is becoming more and more high-tech; enterprises are actively introducing the latest production technologies. That is, Russian models in terms of quality and level of comfort are close to the products of the most famous brands, while differing favorably in price.

It should also be noted that Russian producers are well aware of the peculiarities of gas and electricity supply in the countries of the CIS. In practice, the most modern European models often refuse to work if the gas pressure in the mains is low, and their automation instantly fails even with minor power surges.

Russian heating boilers are adapted to the following specific factors:

• Insufficient gas supply pressure. Such conditions are often observed in remote settlements.
• Gas contamination. Unfortunately, in many places the gas pipeline pipes are worn out, so particles of oxides formed due to corrosion can enter the gas.
• Power surges in the network. In remote areas, power supply is not always stable.

Advice! In areas where there are frequent power outages, it is advisable to install non-volatile gas boilers. Such models are practically not produced by foreign companies.

An important point when choosing a heating boiler is the availability of service. Domestic models, as a rule, can be easily repaired, since spare parts for them are quite easy to buy. When using an imported boiler in an area where there is no service center, difficulties may arise both with repairs and with the purchase of necessary parts.

Russian brands

Floor-standing gas boilers are one of the main areas of work for all Russian manufacturers.

Let's look at some of them:

• Conord. The head office is located in Rostov-on-Don. Gas floor-standing boilers are available in single- and double-circuit versions. A total of 4 series are offered with a power from 8 to 30 kW, the difference between which is the number of circuits and the type of automation;
• Signal. The plant is located in Engels, Saratov region. Currently, two series of floor-standing energy-independent boilers are being manufactured - S-Term and Comfort. The boiler power ranges from 7 to 150 kW, which allows you to choose the appropriate model for any room and conditions. There are single- and double-circuit models;
• Siberia. Products This is a group of floor-standing energy-independent units, presented in three series - Economy, Comfort and Premium. Power range - from 11 to 50 kW. There are single- and double-circuit models;
• ZhMZ. These are gas boilers produced by the Zhukovsky Machine-Building Plant. The range includes single- and double-circuit models of energy-independent floor-standing units with a power from 11 to 68 kW. They are produced in three series - Economy, Universal and Comfort, differing from each other in the type of automation and body shape;
• Lemax. Manufactured in Taganrog. The plant's products include wall-mounted and floor-mounted models with one or two circuits. Three series are produced - Premium, Premier and Prime. The power of the units ranges from 10 to 35 kW.

Most boilers are non-volatile, which is determined by difficult operating conditions, dilapidated power supply networks or a complete lack of connection in remote villages.

This approach is completely justified - in cold weather, a sudden power outage will immediately stop the heating system, and if the energy supply is not restored in a matter of minutes, defrosting of the pipelines is inevitable.

The only solution is to urgently drain the coolant, but this measure is not always possible.

Therefore, the presence of heating boilers independent of external conditions is a very useful solution for domestic users.

Conord

The Conord company was founded in 1979.

This is a manufacturer from Rostov, producing units with two circuits and one, of different capacities. The boilers have useful features that can save up to 20% of fuel. The kit includes an additional coil.

Conord specializes in the production of steel gas boilers for heating a private home with a cast iron heat exchanger. The units do not depend on the power supply network, which means they have piezo ignition and a stably burning igniter. Open type burner.

Floor-standing gas heating boilers from Russia brand Conord have a power of 8-30 kW.

Single-circuit gas boiler of Russian production is represented by the names KSts-G-8, KSts-G-10, KSts-G-12, KSts-G-16, KSts-G-20, KSts-G-25, KSts-G-30 and can equip areas of 30-300 m² with heat. Boilers with two circuits are called KSts-GV-10, KSts-GV-12, KSts-GV-16, KSts-GV-20, KSts-GV-25, KSts-GV-30.

Why is the Lemax brand considered the best based on user reviews?

The advantages of Lemax boilers can be considered:

• a wide variety of design options, functionality and parameters;
• low fuel consumption. In combination with high efficiency, this allows for greater cost savings and an increase in the life of the boiler;
• the price-quality ratio of Lemax boilers is considered the most successful;
• the durability and reliability of the units are highly appreciated by both specialists and ordinary users.

Thanks to these features, Lemax boilers are considered to be among the leaders of domestic heating technology. However, one should not assume that all other products from Russian manufacturers are significantly inferior to these units.

From the point of view of design and performance, the developments of domestic engineers are approximately at the same level. The main advantage is getting rid of redundant add-ons that few people use.

The fewer unnecessary components and parts, the more reliable the design and the easier it is to repair . This applies equally to all units manufactured in Russia. Lemax boilers are presented in a wider range, but are not so superior to alternative options.

The prices and capabilities of domestic floor-standing gas boilers are at the same level, which makes the products of domestic manufacturers accessible and in demand.

Heating equipment plant "Signal"

This manufacturer produces 4 models of wall-mounted gas boilers of the “Comfort” series called “Pokrovsky”. They have a power of 13 to 24 kW and have two circuits for heating and DHW supply. Depending on the power indicator, the wall-mounted gas boiler “Signal Pokrovsky” can heat an area of ​​up to 240 m². The characteristics of the presented unit are as follows:

• weight – 24 kg;
• runs on natural gas;
• Efficiency = 90%;
• DHW consumption at t= 25°C – from 9 to 13 l/min;
• closed combustion chamber.

If you want to know about Siberia floor-standing boilers

Find out about domestically produced floor-standing units here

How to choose the right wall-mounted gas boiler

Rating of TOP-7 floor-standing gas boilers of Russian production

Let's consider the most successful models of floor-standing gas boilers of domestic production, which, according to survey results, are considered leaders among such devices:

Lemax Premium-20

Floor-standing gas boiler, power 20 kW. This is suitable for rooms with an area of ​​180-200 m2. The unit is non-volatile, so the heating circuit should be installed with an upward slope from the boiler.

The boiler is single-circuit, with an atmospheric combustion chamber. Requires connection to a traditional type chimney.

Main technical characteristics:

• coolant temperature (max) - 90°;
• coolant pressure (max) - 3 Bar;
• gas consumption - 2.4 m3/hour;
• dimensions - 556x961x470 mm;
• weight - 78 kg.

To obtain maximum efficiency, many owners connect an external circulation pump and turbo nozzle.

Lemax Premium-12.5

A unit designed to heat a relatively small house with an area of ​​125 m2. The design of the Premium series boilers has a 3 mm thick steel heat exchanger .

The unit is single-circuit, with an open combustion chamber.

Boiler parameters:

• coolant temperature (max) - 90°;
• coolant pressure (max) - 3 Bar;
• gas consumption - 1.5 m3/hour;
• dimensions - 416x744x491 mm;
• weight - 55 kg.

It is possible to connect a turbo nozzle and an external circulation pump, but installing the system pipelines at an angle is required in any case.

Lemax Leader-25

The power of this boiler is 25 kW and allows you to heat a house with an area of ​​250 m2. A special feature of the Leader line boilers is a cast iron heat exchanger, which ensures an even and smooth change of heating modes.

Boilers are capable of developing increased pressure in the system and have several degrees of protection against overheating, flame failure and other undesirable phenomena.

Unit parameters:

• coolant temperature (max) - 95°;
• coolant pressure (max) - 4 Bar;
• gas consumption - 3 m3/hour;
• dimensions - 515x856x515 mm;
• weight - 115 kg.

With all their capabilities, Leader series boilers are non-volatile. They will not stop working if an electrical failure occurs.

This allows the owner not to worry about heating in winter.

Lemax Premium-30N

Non-volatile floor-standing gas boiler of convection type.

Provides only a basic function - heats the coolant for the heating circuit. The power of the device, designed to serve an area of ​​300 m2, is 30 kW.

Main indicators of the unit:

• coolant temperature (max) - 90°;
• coolant pressure (max) - 3 Bar;
• gas consumption - 3.5 m3/hour;
• dimensions - 470x961x556 mm;
• weight - 83 kg.

The independence of the boiler from the availability of power allows it to be used in remote villages or areas with dilapidated, unreliable power networks.

ZhMZ AOGV-17.4-3 Comfort N

Double-circuit gas boiler produced by the Zhukovsky Mechanical Plant. The power of the unit is 17 kW, designed for heating 140 m2.

The main fuel is natural gas, but it is possible to switch to liquefied fuel if the injectors are replaced. The boiler provides heating for the house and supply of hot water.

Its characteristics:

• coolant temperature (max) - 90°;
• coolant pressure (max) - 1 bar;
• DHW temperature (max) - 80°;
• gas consumption - 1.87 m3/hour;
• dimensions - 420x1050x480 mm;
• weight - 57 kg.

The units of the Zhukovsky plant are distinguished by a specific body shape, resembling a cylinder on three legs .

IMPORTANT!

However, this does not impair the operational capabilities of the boilers, and their low fuel consumption makes them very attractive to buyers.

Lemax Premium-25

Single-circuit gas boiler with an atmospheric combustion chamber. Designed to heat rooms up to 250 m2, as evidenced by a power of 25 kW.

The floor-standing, non-volatile unit has the following parameters:

• coolant temperature (max) - 90°;
• coolant pressure (max) - 3 Bar;
• gas consumption - 3 m3/hour;
• dimensions - 470x961x556 mm;
• weight - 83 kg.

The design of the boiler differs little from the design of other Lemax units. It is possible to connect an external storage device, which allows you to provide the premises with hot water .

Lemax Premium-30B

Floor-standing gas double-circuit boiler. Does not require connection to the power supply.

Capable of heating rooms up to 300 m2, at the same time providing hot water for domestic needs.

• coolant temperature (max) - 90°;
• DHW temperature (max) - 80°;
• coolant pressure (max) - 3 Bar;
• gas consumption - 3.5 m3/hour;
• dimensions - 556x961x470 mm;
• weight - 88 kg.

This boiler is a good option for a heating installation for a two-story house. With high capabilities, it is very economical, which increases its relevance and demand among users.

NOTE!

The warranty on all boilers is 3 years.

Prices: summary comparison table