TOP 10 best wall-mounted gas boilers in 2022

Wall-mounted gas boilers combine the main advantages: compactness, efficiency and ease of operation. Practice shows that in modern conditions this is the best technical solution for heating a house and heating water. And all thanks to the successful consumer characteristics, especially in comparison with solid fuel and electric ones. The rating from our editors will help you choose the best wall-mounted gas boiler for private use. It will also tell you what parameters a good gas boiler has, what advantages are important and what disadvantages may be hidden.

Rating of wall-mounted gas boilers

Heating equipment is produced by young companies and well-known enterprises that have been operating on the market for more than half a century. The VyborExperta.ru team selected models that are in high demand for testing. Boilers of different price categories were studied, empirical data were compared with the characteristics stated in the technical documentation. When compiling the review, reviews of wall-mounted gas boilers, the opinion of gas service specialists and heating engineers were taken into account.

During the analysis, attention was paid to the following parameters:

• Type of equipment – ​​models with one and two heating circuits are available;
• Power – is directly dependent on the heated area;
• Combustion chamber type - an open design consumes air from the room, a closed one is forced into it;
• Functionality - the ability to adjust power, multi-stage safety systems make work more efficient;
• Efficiency – determines the efficiency of the heating system;
• Dimensions and weight affect the complexity of installation.

Not all models have been tested. Low efficiency indicators, shortage of spare parts, mechanical defects of the housing, rapid failure of controllers - boilers with such shortcomings were excluded from our rating.

The best heat accumulators

Network of service centers

Baksi has more service centers in the Russian Federation than Vaillant. Most of Vaillant's authorized service centers are located in the western part of Russia. Baxi has a wider geographic coverage, making it easier to find a specialized company.

Baksi service centers in the Russian Federation

Vailant service centers in the Russian Federation

Whatever boiler you decide to buy, you should make sure in advance that there is a service center of the selected manufacturer nearby. This will simplify both equipment installation and further maintenance.

You can always view the current list of official service centers on the official websites of manufacturers.

The best double-circuit wall-mounted gas boilers

Installing a wall-mounted gas double-circuit boiler for a private home is an opportunity to solve the problem of heating and hot water supply. The equipment is more complex, so reliability is one of the basic selection criteria. Based on the work done, VyborExperta.ru recommends 6 boilers that are distinguished by high efficiency, functionality and reliability.

Baxi Eco-4s 24F

Created by Italian engineers, adapted to Russian winters and the characteristics of main gas pipelines. A small-sized gas double-circuit wall-mounted boiler 24 kW operates effectively under pressure drops. Flame modulation is carried out using a microcontroller, which has a positive effect on fuel consumption. For this series, engineers chose a combustion chamber of a closed design and installed air supply regulation. These solutions ensured high equipment efficiency. If necessary, the burner can be reconfigured to operate on liquefied gas.

The primary heat exchanger is made of pure copper, additionally protected from corrosion. The secondary heat exchanger is made of stainless steel and has a plate design, which ensures high efficiency. The installed circulation pump has a built-in automatic air vent. A filter is installed at the inlet to protect the equipment from mechanical impurities.

Advantages:

• Stainless steel flame divider;
• Hydraulic group made of composites;
• Automatic bypass;
• Informative display;
• Effective protection systems;
• Self-diagnosis system.

Flaws:

• Not detected.

Engineers have provided two-level temperature control. This gives users the opportunity to connect two circuits - the main heating and heated floors - and set the optimal mode for each system. The connection of weather-compensating automation makes it easier to adjust the temperature.

Buderus Logamax U072-12K

The products of the German company are manufactured at a plant in Russia, the design is adapted to domestic conditions. The equipment does not lose its efficiency at low pressure in the gas pipeline, and the automation is trouble-free at mains voltages from 165 to 240 V. Resistance to voltage surges ensures uninterrupted operation. It has a plate heat exchanger that will heat water for a family of 3-4 people. The maximum flow rate of heated water can reach 8 liters per minute.

An informative display, with the help of which the main operating parameters are set, helps to exercise control. The multi-level safety system will work in case of freezing, pump blockage, elevated temperature or lack of flame. Modulation makes it possible to adjust the heating over a wide range.

Advantages:

• Closed combustion chamber design;
• Easy installation and startup;
• Convenient service;
• Built-in membrane tank;
• Low noise level;
• Holds the set temperature well.

Flaws:

• Overcharge.

Viessmann Vitopend 100-W A1JB009

Features a high level of automation. An instantaneous water heater makes the supply of hot water as efficient as possible. Equipping the combustion chamber with a turbine helped increase efficiency and make the work as economical as possible. The coolant temperature is constant and remains stably at a given level.

The German wall-mounted gas boiler with a closed combustion chamber has a built-in controller, which forms a single module with self-diagnosis equipment. The time relay allows you to set the optimal operating mode for one day or a week. The equipment is reliably protected from voltage fluctuations and pressure drops in the main gas pipeline. Information about the main technical parameters is displayed on the backlit display.

Advantages:

• Built-in 6 l membrane tank;
• Multi-level protection;
• Automatic ignition;
• It is possible to connect external control;
• Reliable circulation pump;
• High performance of the DHW system.

Flaws:

• High price.

Bosch Gaz 6000 W WBN 6000-18 C

The model from the German manufacturer is equipped with a stainless steel gas burner and a modulated fan. The volume of forced air is regulated automatically. The heat exchanger is made of pure copper and has a service life of at least 15 years. The system is protected from overheating by a temperature limiter. Flame control is carried out using an ionization electrode, and automatic ignition makes starting as simple as possible.

Reliable protection against temperature changes, gas pressure surges and voltage drops is installed. The design includes a membrane bank and a three-stage circulation pump. The housing has reliable thermal insulation, which increases efficiency and protects against overheating.

Advantages:

• Informative display;
• Small sizes;
• Low noise level;
• External temperature controllers can be connected;
• Low price.

Flaws:

• It is better to entrust the first launch to professionals.

Navien Deluxe S COAXIAL-16k

The South Korean brand Navien offers good wall-mounted gas boilers for the home at low prices. The equipment is supplied to the United States, European countries, and Russia. This series is distinguished by the high performance of the domestic hot water system, the efficiency of the new smoke removal system and an improved hydraulic group. The variable speed fan ensures economical fuel consumption.

It has effective protection of the microcontroller from power surges, and the remote control panel makes setting operating parameters as convenient as possible for the user. The boiler has a built-in pump and a reliable membrane expansion tank. All main components are easily removable, making repairs as simple as possible.

Advantages:

• Low noise level;
• Available spare parts;
• Easily converted to liquefied gas;
• Convenient service menu;
• There are no delays when switching from heating to DHW.

Flaws:

• Not detected.

Ferroli Divabel F24

The Italian boiler has one of the highest efficiency in its category. Equipped with an atmospheric burner with a reliable gas valve, a brass hydraulic unit and a 10-level safety system. Heating the heat exchanger reduces heating time and provides high speed hot water supply to the consumer. When connecting a proprietary room thermostat, the controller maintains the user-specified room temperature.

Equipped with a three-speed pump from Wilo, which is characterized by low noise levels and increased reliability. The control is electronic; a pressure gauge and thermometer are installed to control the main parameters. The manufacturer has provided a self-diagnosis function and a water filter. This increases service life.

Advantages:

• Easy installation;
• High profitability of application;
• Resistance to pressure changes;
• Simple settings.

Flaws:

• Laconic design.

Customer Reviews

Oleg D.

Lemax Premium-30N, 30 kW, single-circuit

For a private home, the choice is good: for this price we get both decent assembly and good power. This Lemax series has no special bells and whistles, just a good boiler without unnecessary electronics. The protection works when the gas workers on the main were working, it turned off normally, and the gas was turned off. In my opinion, this is the most important thing for a gas boiler; there is no need to joke with gas. I wanted to get a cast iron one, but I couldn’t afford it. I decided to believe the reviews and took a steel Lemax. Well, what can I say - it worked for three years without a hint of leakage. I have enough power to spare, my house is always warm. I took the boiler to put it at the dacha, where we visit with the child all year round, incl. The dacha has an area of ​​120 square meters, and we needed it to be really warm everywhere, after all, we are traveling with a child and spending the night. Well, I was specifically looking for a reliable option, because after all, it’s a dacha, outside the city, and we often leave leaving the boiler to work, they said that Lemax is perfect for such cases (when reliability is important) (and there really are no problems!). I was pleasantly pleased with the price, I thought I would have to pay more for this. Well, and convenient, of course, where without it, and the kit includes a clear instruction manual in the passport. It’s really not difficult to deal with it) So far there have been no failures, there’s not even anything to scold about.

Valentin Ya.

Lemax Patriot-12.5, single-circuit

Assembled with high quality. As installed a year and a half ago, it did not cause any problems. The design is simple but reliable - no fancy electronics, it works without being connected to an outlet. The ignition is well done. Warms up quickly. But last winter it was a little cold, I saved in vain - I should have added Lemax’s “Patriot 20” to the same one, it would have been warmer with it. 12.5 kilowatts is still not for my area, and the walls don’t have proper thermal insulation. It's a shame, the boiler itself is excellent.

Anton Ashurkov

Buderus Logamax U072-18, 18 kW, single-circuit

When I moved to a new house, I started looking for a good gas boiler. I wanted it installed before the cold weather. The installers took me to this model. Before buying, I decided to look at reviews about this model on one review site. It seems that people advised everything. Yes, the boiler had some minor flaws, but this was not fatal. The manufacturing company is the German concert Bosch. And for me, everything is German, it immediately refers to quality and durability. Just out of curiosity, I read the history of the brand. Now about the boiler itself. There were no problems with the installation. The boiler itself is white, attractive, and equipped with a special panel. It is with the help of this panel that the control is carried out. My house is big. The boiler completely copes with heating my mansion. When it’s severely cold outside, naturally, you have to set the temperature higher. If it gets warmer, you can do less. After the old model, the new boiler, for me, works almost silently. So far during operation, I haven’t found anything to complain about. Everyone at home is warm. In case of any malfunction, the boiler is equipped with various protections and interlocks. It’s scary, nothing will happen for sure. I recommend.

Pavel Alexeev

BAXI ECO-4s 1.24F, 24 kW

People! Don't take 2 contour lines! Take a single-circuit unit (like this one) plus an indirect heating tank plus a three-way valve. Yes, you will overpay about 17 thousand rubles, but you will have a normal system with hot water of the same temperature, you will be able to circulate hot water and your boiler will not switch to hot water every time you need to wash a mug. A bonus is the absence of scale, since the water inside does not leave the heating/heating circuit. And don’t buy condensers unless you know EXACTLY what you need. Update. A year of work - everything is fine.

Volodya Z.

Lemax Leader-25, 25 kW

I have a two-story house with an area of ​​185 sq.m. There is enough space in the house, but to heat it, we needed a powerful and efficient boiler. After searching on the Internet, I liked the Lemax Leader-25 floor-standing boiler, designed for heating areas up to 250 sq.m and with a modern security system. I took it with a reserve, in case we decide to finish building something. The boiler has been working for me for the first heating season, and so far it has shown its best side. It warms up the house quickly, and when you start it up two hours later, you can feel the living spirit in the house. The panel has a temperature regulator, which makes it easier to select the appropriate thermal mode.

Evgeniy S.

Gas boiler Lemax Patriot-12.5, single-circuit

Lemax Patriot-12.5 installed in a three-room apartment. I am completely satisfied with the operation of the boiler. It does an excellent job of heating the apartment, it works completely silently, you need to listen to understand when it started, the external appearance of the boiler is compact and of a modern design. This is an excellent option for apartments that are not equipped with chimneys. The boiler has served me for two years and so far I have not found any flaws in it.

Maxim K.

Buderus Logamax U072-24

Advantages: The boiler is designed very simply, which makes it quite reliable. I understand both its operating principle, indicated in the instructions, and the controls. Perfectly suited to a 150l indirect boiler and a 200m2 heating system. Disadvantages: Structurally, it is not designed for a sudden power outage. Like many others. When the power is cut off at the very peak of heating of the indirect heater, for example, an overheating error of the heat exchanger appears, because the boiler no longer circulates water, and the heat exchanger remains very hot.. After turning on the power, an overheating error appears and the boiler will not turn on until you reset it manually.. That is, if you left for several days and your power was turned off, you you can return to a cold house with a boiler stopped by an error.. Comment: In general, this is what my project needed. The boiler copes with its tasks perfectly. Heating a 200m2 house with heated floors, an air heater and heating water in a 150l indirect heating tank. By the way, it heats this volume of water from +9° to the calculated +55° in about 15 minutes. That is, from a completely icy state. I connected an indirect boiler to the boiler. By the way, who doesn’t know, a simple NTC 10kOhm thermistor, which costs 50 rubles on a well-known Chinese website, can serve as a boiler temperature sensor for the Buderus Logamax U072-24 boiler. The sensor is sold with wiring, and the boiler already has a connector for it. The boiler perfectly sees the current temperature of the water in the boiler and controls its heating.

Gennady Dick

Buderus Logamax U072-18, 18 kW, single-circuit

This brand of boiler was recommended to us by the gas workers who gasified our house. They also calculated that for a house whose total area does not exceed 120 sq.m. The power of this boiler is enough even with a reserve. Therefore, we tried to buy a boiler before all installation work was completed, so that it would be immediately connected to the heating circuit. There were no special problems connecting the boiler, except that we had to install an additional 3/4″ adapter, since our heating circuit was routed with inch pipes. They hung it on the wall using the standard hooks that came with the kit. The gas was connected by specialists, they also checked the gas control protection and gave us a brief instruction on how to use the system. There is nothing particularly difficult about operating the boiler. I set the required temperature on the remote control using buttons, and the automation will monitor everything else. The latter, by the way, is quite strict about compliance with safety regulations. A couple of times she signaled to us that we needed to clean the chimney, where foreign objects had gotten into. And it works very stably. It was always warm in the house, even when the frost outside reached -35 degrees.

Alexey K.

Lemax Leader-25, 25 kW

I'm surprised that the material is cast iron, which lasts forever, and costs the same or even less than some with a steel heat exchanger. I took Lemax precisely with the expectation that I would get more at a lower price. Turned it on, turned it off - and all the trouble. Installed in a separate room, away from living rooms. It does not make noise, does not require settings - everything is automatic. The cast iron heat exchanger will outlive me. But without the circulation pump the coolant barely moved, with the pump it was ok, but that’s the only way electricity is consumed.

Dmitry Sirenko

Buderus Logamax U072-18, 18 kW, single-circuit

For a small private house, what was required, first of all, was a reliable gas boiler that could reliably perform its main function throughout its entire service life, and maybe longer. Before this we had a Chinese-made boiler, which we had a lot of trouble with. We didn’t want to step on the same rake again and again, so this time we chose a boiler from a well-known German brand. Since all our communications were already connected and the boiler was hung in the place of the old one, there were no special problems with the connection. Moreover, the boiler is not very heavy and compact in size. The controls are simple and intuitive. You can quickly figure out the settings without even reading the instructions. Although I still advise you to read the instructions for the first time, they are written in clear Russian. After reading it, you will definitely have no more questions. The boiler has a copper heat exchanger and a relatively small storage tank, but at the same time it reaches the temperature set on the control unit relatively quickly. This winter we also experienced frosts of 20 degrees, but even at that time we did not freeze at all, despite the fact that the temperature on the control unit was above 60 degrees. were not exhibited.

Sergei Brodsky

Buderus Logamax U072-24, 24 kW, single-circuit

We installed this boiler in conjunction with an indirect heating tank. In the service parameters (L.2; 2.4E) the value was set to “2”, i.e. “single-circuit boiler + indirect heating tank”, however, after just 2 weeks of operation, the setting spontaneously reset and switched to “1”, i.e. “double-circuit boiler”. All other settings, oddly enough, have not changed. I don’t know what the control board saw there, what connections were there, but the boiler is single-circuit + tank. As a result, the hot water supply disappeared early in the morning, and with it the whole day of nervous study of those. documentation and the Internet in attempts to understand what happened to it, since there were no errors on the display. It’s good that I came across the correct information, otherwise I was already planning to disassemble and clean the three-way valve, and blow out the sensors...

The best single-circuit wall-mounted gas boilers

If you have a hot water boiler in your home, you can purchase a wall-mounted gas heating boiler with a simpler design. The equipment requires less maintenance and has a low price. Leading manufacturers equip their models with automatic control and self-diagnosis systems, which simplifies operation for the average user.

Baxi Eco-4s 1.24F

The convection boiler attracts with its design and high efficiency. the presence of a built-in pump and a membrane expansion tank allows you to reduce the cost of heating installations. Works equally effectively on natural and liquefied gas. Electronic control, all main parameters are displayed.

Multi-level protection ensures a high degree of safety, and automatic diagnostics will help identify faults before the technician arrives. The primary heat exchanger is made of pure copper, and the flame divider is made of stainless steel.

Advantages:

• The hydraulic group is made of composite materials;
• Low noise level;
• Easy installation;
• Stable temperature;
• Works during power surges.

Flaws:

• Not detected.

Protherm Panther 25 KTO

It has a closed chamber and a coaxial gas exhaust system, which eliminates the need for a chimney. The built-in expansion membrane tank and pump reduce the cost of purchasing components, which makes it a good choice for a private home or organizing hot water supply in a large apartment not connected to a centralized system. Automatic control allows you to quickly set operating parameters and inform you about water temperature and malfunctions.

Works well at low gas pressure and power surges. Multi-level protection makes operation safe and comfortable. The model has one of the best efficiency in its class, which reduces fuel consumption and utility costs. The self-diagnosis system helps to find problems in the operation of equipment.

Advantages:

• High power;
• Design;
• Easy installation and connection;
• Convenient settings;
• Separate mode for heated floors.

Flaws:

• Not detected.

Vaillant turboTEC plus VU 242/5-5

Designed for private houses with an area of ​​200-240 sq.m. The closed modulating burner smoothly regulates power over a wide range of values. Forced removal of gases ensures a high level of safety. The housing contains a membrane tank and a pump with automatic switching of stages. The pressure is controlled automatically, the software allows you to configure all the main operating parameters taking into account personal preferences and climatic conditions.

The boiler is made of pure copper, and the burner is made of heat-resistant chromium-nickel alloy. Electronic ignition makes starting heating equipment simple, and a built-in remote control module allows operation to be monitored remotely.

Advantages:

• Two operating modes;
• Efficiency 91%;
• Informative display;
• Pump jam protection;
• Self-diagnosis;
• Good equipment.

Flaws:

• High price.

Ariston Clas X System 24 FF NG

Convection model with closed burner. Operates on natural and liquefied gas. Owners do not have to purchase an additional membrane tank and pump - the equipment is built into a common housing. Electronic control, all basic parameters and operating modes are set using the display. There is a self-diagnosis function that helps identify faults.

Has built-in frost protection, air vent and safety valve. Connection of external control is provided. Auto-ignition makes starting easy, and the modulating burner allows for economical fuel consumption. Good thermal insulation of the housing helped increase the efficiency to 93.7%.

Advantages:

• Design;
• Low noise level;
• 8 liter tank;
• Programmer;
• Inlet water filter.

Flaws:

• Overcharge.

Briefly about Vaillant and Baxi companies

Vaillant Group (Germany) is a family-owned company with 145 years of tradition, producing equipment for heating, water supply, ventilation and air conditioning. Vaillant equipment is distinguished by excellent German build quality. Vaillant is a pioneer in the development of energy-efficient technology based on renewable energy sources (energy from the sun, earth and water). The company is focused on the development and implementation of innovations and respect for the environment. Vailant boilers are full-fledged intelligent mini-boiler rooms with a stylish design and an abundance of additional functions, including remote control from a smartphone, integration into the smart home system and other promising solutions. Particularly noteworthy is the advanced self-diagnosis, which performs a number of tests that are not available for budget models (for example, monitoring the start of a circulation pump based on the level of discharge pressure).

The Italian manufacturer of heating and water supply equipment Baxi is known not only in Russia, but throughout the world. In the vastness of the Russian Federation, boilers appeared relatively recently, but in many houses and apartments of our compatriots today Baksi boilers and columns are installed. Baxi equipment replaced boilers produced in the USSR and in the post-Soviet space; it introduced Russians to new technologies and increased comfort when using heating and hot water supply. They are compact, have self-diagnosis functions, a full-fledged protection system, LCD display, modern design, etc. At the same time, prices for Baxi are significantly lower than premium quality brands such as Vaillant, Buderus and De Dietrich.

Prices for Baxi boilers are lower than for Vaillant, but the difference in cost is compensated by the quality of components and the presence of additional useful functions in Vaillant.

Both manufacturers have developed instructions and information brochures for the main range, so you can read the documentation in advance, even before purchasing. Many instructions for Vailant and Baksi are presented in our Heat-Comfort online store.

You can order the heating boiler you like in the catalog of the Teplo-Comfort online store or by calling: +7 (495) 106-15-16.

How to choose a wall-mounted gas boiler

The rating of wall-mounted gas boilers includes equipment that is worthy of installation in a private home or commercial property. It is not enough to choose a model from the TOP 10 that is suitable for the price. To keep the house warm and have enough hot water for all users, it is necessary to take into account parameters such as power and type of combustion chamber. The functionality offered by the manufacturer must meet the user's requirements.

Single-circuit or double-circuit

The user must make a choice between a single-circuit and double-circuit boiler. For a heating system, a single-circuit model is sufficient. This equipment is characterized by a simple, reliable design and low maintenance costs. If you plan to organize a hot water system in the future, you can choose a single-circuit boiler with the ability to connect an indirect heating boiler.

If there is a shortage of free space and the desire to solve problems with hot water supply by installing one boiler, it is necessary to choose double-circuit models. Among this equipment, equipment with plate heat exchangers has higher productivity.

Heated area

The second most important criterion for choosing heating equipment is the area of ​​the room that is planned to be heated. What wall-mounted gas boiler is needed for a house with an area of ​​200 sq.m.? With a ceiling height of 2.7-3 m, a model with a power of 20 kW is sufficient. Unheated rooms can be subtracted from the total area of ​​the house. When the ceiling height increases, it is recommended to increase the power characteristics proportionally. In houses with ceilings of 2.5-2.6 m, the indicators can be reduced. Thermal engineers will make accurate calculations.

Power

The power depends on the design of the burner and the volume of air consumed. The best performance is for closed, turbocharged models. Air is pumped into the combustion zone, which increases the power of the equipment. The downside of this design is the high noise level. The housing must have good sound insulation or the boiler must be installed in a separate room.

The ability to regulate power will help reduce fuel consumption and make the temperature comfortable. Modulating burners can change their operating characteristics. You can adjust the characteristics manually or automatically.

Combustion chamber type

An open combustion chamber consumes air from the surrounding space. Models of this type are characterized by low power, but have a low price. This technique is suitable for a country house or for organizing hot water supply in a small apartment. Closed combustion chambers have a more complex design; combustion air is forced in. This allows you to increase power and be able to adjust this parameter.

Functional

Manufacturers offer equipment with different sets of functions. Simple models have electromechanical control and a minimum list of security systems. More advanced equipment is equipped with microcontrollers and a multi-level security system. This equipment is reliable, economical, and easy to operate. Basic parameters are set using the monitor. A number of manufacturers offer programmed modes for using heating equipment.

An important function is self-diagnosis. The microcontroller will automatically detect faults and issue error codes. This will help you invite a repairman in a timely manner and avoid critical situations.

Baxi and Vaillant quality control

Vaillant boilers, water heaters and other equipment are the embodiment of the concept of “German quality”. The manufacturer uses a unique multi-stage quality control system using the “one piece flow” method. Each piece of equipment is assembled by one master, who bears personal responsibility for his work. Next, the equipment is sent to test benches, where it undergoes a detailed check on many parameters. Only after this the products are shipped to the intermediate warehouse.

Baxi factories annually produce hundreds of thousands of boilers, water heaters and other equipment. Assembly of one unit takes just a few minutes. Despite this, the equipment is tested for leaks, operability of main components and electronics, safety for humans and the environment, and so on. There is a testing laboratory capable of simulating maximum loads for “stress tests” of boilers selectively selected from the assembly line.

Both manufacturers have their own research departments that allow them to develop technologies and introduce innovations.

Which wall-mounted gas boiler is better?

Which boiler should you have in your home? There is no universal model, since real estate properties have different sizes and layouts. In some houses, an indirect heating boiler or an electric water heater is already installed, in others the project involves the installation of a double-circuit boiler. The VyborExperta.ru team recommends the following models, taking into account the characteristics of the objects:

• Baxi Eco-4s 24F – for heating and hot water supply of a house of 240 sq.m.;
• Navien Deluxe S Coaxial-16k – for a budget country cottage of 140-160 sq.m.;
• Viessmann Vitopend 100-W A1JB009 – for those who value quality and functionality;
• Baxi Eco-4s 1.24F – for a cottage of 200-240 sq.m., in which the problem with hot water supply has been solved;
• Vaillant turboTEC plus VU 242/5-5 – for mansion owners who are passionate about technical progress;
• Ariston Clas X System 24 FF NG is a model with a good balance between price and quality.

All boilers in the review are reliable and economical, but only models with an automated control system are worthy of the title of the best.

Model range and assortment

Let us help you choose a boiler! Call: +7 (495) 106-15-16.

The Vaillant company specializes in premium equipment, while Baksi offers economy and comfort class models. Both companies have both floor-mounted and wall-mounted boilers, and the core of the range is the most popular and best-selling gas boilers. Both brands offer solutions for both small facilities and industrial enterprises or multi-apartment buildings.

Baxi is trying to satisfy the needs of the mass consumer, while Vaillant suggests going beyond classic heating solutions and paying attention to new technologies that have become available for use in everyday life. For example, Vaillant heating can use solar collectors and heat pumps for more environmentally friendly and energy efficient use of fuel resources.

The most popular Baksi series are Luna 3, ECO Four, ECO 4s, Nuvola. At Vaillant, the leaders in demand are the turboTEC, atmoTEC, ecoTEC models.

Vaillant and Baxi have international and Russian quality certificates. Our online store Teplo-Comfort presents only certified boilers and water heaters adapted for Russia.