All boilers in a certain price category and with similar characteristics are the same in operation. The models differ only in fuel efficiency, resistance to operating conditions and external adverse factors, and safety. All this is achieved through the use of new and more expensive alloys and materials, and build quality. German gas boilers are considered the reference, but their closest competitors are models from Italian manufacturers, which are often 10-20% cheaper.
In the article we will look at the features, advantages, best models and possible problems of floor- and wall-mounted, single- and double-circuit Italian gas boilers for heating a private home.
Italian double-circuit wall-mounted boilers
Italian heating technology is popular and in high demand.
The reasons for this attitude are:
- Advanced level of design development.
- High quality production and assembly of units.
- Adaptation of boilers prepared for export to the technological conditions of the operating country.
- Constant scientific and technical research, which allows us to quickly introduce improvements into the design, remove defective or weak components and solve other issues.
Many users consider the only drawback to be the relatively high cost of the equipment, although top-level units cannot be cheap by definition.
Most Italian companies have a long history and have accumulated rich production and technological experience, which helps them in creating high-quality and reliable gas boilers.
Beretta
Another well-known Italian manufacturer of heating boilers.
These products are often classified as economy class products. Indeed, Beretta gas boilers are somewhat cheaper than similar equipment discussed above. However, this does not mean that it is inferior in quality to the indicated manufacturers. The country of origin is the same - Italy, components and assembly level undergo no less strict control. It is possible that the price level is influenced by the slightly less well-known brand itself, which can be considered quite a sufficient justification for a company that seeks to conquer the market.
Among Beretta products you can also find everything you need to organize your own heating system. An interesting feature is the presence of models designed for regions with low average temperatures - the NORD modification.
The best Italian manufacturers and models: characteristics and prices
Baxi
One of the best and most common Italian gas boilers in Russia for heating a private home. Baksi boiler units have been on the Russian market for more than 15 years and have proven themselves to be the most reliable, efficient and functional for their price. Depending on the model, the nominal service life (declared by the manufacturer) is 12-15 years, which, subject to operating conditions and regular cleaning, is true in more than 90% of cases.
Baxi boilers are among the most affordable of the Italian ones, however, they use modern alloys and technologies. There are also known disadvantages, such as noisy circulation pumps on earlier wall-mounted models, volatility and high power consumption; the automation requires the installation of a voltage stabilizer, since, unlike other Italian analogues, it is still vulnerable to voltage surges.
Wall-mounted Baxi ECO4S 24 F.
The most common model is the Baxi ECO4S 24 F - an Italian double-circuit wall-mounted gas boiler with a closed combustion chamber with a power of 24 kW. The boiler efficiency is very high - 92.9% with a moderate gas consumption of 2.73 cubic meters. m/hour. The boiler is equipped from the factory with a safety valve, an air vent, and protection against pump blocking, overheating or freezing. During operation, no significant deficiencies were found. Cost: 33-36 thousand rubles.
Model LUNA 3 Comfort 1.240 i.
An excellent analogue is the LUNA 3 Comfort 1.240 i model, which features a removable electronic control panel with a built-in room temperature sensor, which allows you to control the boiler from any room in the house. The boiler efficiency is slightly lower - 91.2%, which is still considered an extremely high indicator, gas consumption - 2.78 m3/hour.
Average cost: 39-43 thousand rubles.
Of the floor-standing models, the convection single-circuit BAXI SLIM 1.230 iN with a power of 22.1 kW with an open combustion chamber is popular. The boiler efficiency is optimal - 90.2% with a gas consumption of 2.59 cubic meters. m/hour. It is easy to operate, equipped with a reliable cast-iron heat exchanger, operates extremely quietly and stably, but is vulnerable to voltage surges; it is advisable to install a voltage stabilizer in front of the boiler.
Cost: 53,000-58,000 rub.
Ferroli
The company has specialized in the production of heating equipment since 1958. Models of gas boilers of this brand are distinguished by one of the most compact sizes, high efficiency and safety. Prices for the simplest models start at 25 thousand rubles, which is 10-20% cheaper than Baksi. However, a serious drawback is the low reliability of inexpensive wall-mounted models; perhaps they are the most problematic among all Italian models.
Model Ferroli Fortuna Pro F24.
The most popular and most successful is the Ferroli Fortuna Pro F24 wall-mounted double-circuit boiler with a power of 24 kW and an efficiency of 93.1% with a record flow rate for such power - 1.81 m3/hour. The heat exchanger is made of copper, the model is characterized by quiet, almost silent operation, pre-heating of the DHW circuit is implemented, which significantly reduces the delay in the supply of hot water. Cost: 25-29 thousand rubles.
Of the floor-standing gas boilers, the relatively simple and very reliable Ferroli Pegasus D 23 with a power of 23 kW and an efficiency of 90.9 with a consumption of 2.68 cubic meters has proven itself well. m/hour. It is based on a reliable cast iron heat exchanger and multifunctional safe automation. The only drawback is the inability to regulate the burner power using the controls, which often increases the number of cycles (ignition-extinguishing). Cost: 61,000-69 rub.
Ariston
The manufacturer is distinguished by some of the most heat-efficient wall-mounted gas boilers. Their efficiency is in the range of 93-94%, the build quality, convenient remote control and stylish minimalist design are also impressive. A frequently noted disadvantage is the instantaneous loud ignition in the form of a characteristic pop, while the adjustment of the cycle duration is often limited to 5-10 minutes.
Model Ariston CARES X 24 FF NG.
One of the best is considered to be the double-circuit wall-mounted model CARES X 24 FF NG with a power of 25.8 kW and an efficiency of 93.7% with a consumption of only 2 cubic meters. m/hour. In addition to high efficiency, it is distinguished by reliability, quality of materials used and assembly, functional automation with the ability to plan 7 days in advance. According to the practice of the owners, the boiler heats both the heating circuit and hot water quite quickly and stably.
The only drawback is the loud ignition and noisy operation of the turbine. Cost: 32,000-34,000 rubles.
Lamborghini
The Lamborghini Caloreclima company (from the founder of the famous automobile brand) is one of the leaders in Europe in the production of climate control equipment. The manufacturer's gas boilers are not so popular in Russia due to their extremely high cost, but they are an excellent unique product.
Wall-mounted Fondital Victoria Compact CTFS 24 AF.
Relatively inexpensive and at the same time successful is the wall-mounted dual-circuit Lamborghini FL D 24F with a closed combustion chamber with a power of 25.8 kW. Boiler efficiency is 93% at a flow rate of 2.73 m3/hour. Equipped with a copper heat exchanger with high thermal conductivity, it is characterized by continuous electrically adjustable flame modulation and smooth ignition, which makes its operation almost silent. The boiler also has a high operating pressure in the heating circuit - 3 bar.
Lamborghini Calor boilers are known for their reliability and exceptional quality, but in the event of a malfunction, finding competent specialists and quickly obtaining spare parts can be difficult. Therefore, it is better to choose such rare boilers if you have a house in the Moscow or St. Petersburg regions. Cost: 37-42 thousand rubles.
Immergas
Another manufacturer of wall-mounted gas boilers, characterized by the highest efficiency rates (93-94%). The boilers have an average price for Italian models, intuitive and multifunctional controls.
Mounted Fondital Victoria Compact CTFS 24 AF.
One of the best models is considered to be the Immergas Eolo Star 24 3 with a power of 23.8 kW and an efficiency of 93.4 with a natural gas consumption of 2.7 cubic meters. m/hour. It features extremely fast heating, stability and virtually silent operation. Ignition is smooth, without characteristic pops.
The only drawback, due to the manufacturer’s not-so-great popularity in Russia, is the poorly developed service structure: not all regions have competent specialists, and service visits often take a long time. However, according to practice, the need to call them is extremely rare. Cost: 35,000 rubles.
Fondital
Boilers of this brand are a good alternative to the analogues listed above; they are superior to some models in terms of characteristics, but they also have their drawbacks that do not allow them to be considered the best. The most successful model is the dual-circuit Fondital Victoria Compact CTFS 24 AF with a power of 23.7 kW and an efficiency of 93% with a flow rate of 2.7 cubic meters. m/hour, which is a good average for Italian gas boilers. In addition, high DHW performance and quiet operation are noted.
Model Fondital Victoria Compact CTFS 24 AF.
However, in terms of reliability, Fondital boilers are inferior to their Italian counterparts. A known problem with this model is the incorrect operation of the automation after 3-4 years of use: it turns off the boiler or turns it on outside the heating season, and does not meet the specified heating conditions. The reason is simple clogging of the flame control electrode, which, like many boiler elements, must be cleaned annually.
With more careful maintenance, a high-performance boiler will operate without problems for many years. Cost: 42,000 rub.
One of the most underrated and less common gas boilers on the Russian market, but worthy of attention. Successful models are highly efficient, reliable and silent; after installation practice, there are models that work without problems for 6,7 or even 10 years. However, a noticeable disadvantage is their 8-10% higher cost.
Model Fondital Victoria Compact CTFS 24 AF.
One of the best and most common models is the wall-mounted double-circuit boiler Sime BRAVA ONE 25 BF with a closed combustion chamber with a power of 23.7 kW. The efficiency of the model is 92.9% with a natural gas consumption of 2.7 m3/hour. The boiler has a reliable and efficient copper heat exchanger, stable DHW performance, and operates almost silently, without characteristic pops. But the automation is sensitive to voltage changes and necessarily requires grounding; it is advisable to connect the boiler through a voltage stabilizer. Average price: 33-37 thousand rubles.
The RX 19 CE IONO and RX 19 E floor-standing boilers with heat exchangers made of high-quality eutectic cast iron are also known for their simplicity and durability.
Criterias of choice
A wide variety of gas boilers and other types of heating equipment often confuse buyers. The right choice must be based on certain requirements. Having found out for yourself the purpose of the device, you should then take into account the main parameters:
- Type of fuel;
- power;
- dimensions;
- type of instalation.
According to experts, gas boilers are the most cost-effective and easiest to operate. Not only the heating of the room, but also the costs will depend on the power of the model. There are products that can be hung on the wall in the hallway or in the kitchen. More bulky units will require a separate room
When choosing the type of installation, you should take into account the layout of the home and the weight of the equipment for creating heat supply
Italy is one of the most widely represented countries on the Russian market in terms of the number of manufacturers of autonomous heating systems. Italian ones belong to the middle class products, which cost slightly less than their German or Swedish counterparts, but are quite comparable in quality. Next we will look at the products of the most famous brands from the Apennine Peninsula.
The leading Italian supplier of heating equipment, the BDR Thermea group, which owns this brand, ranks third among European manufacturers. According to representatives of the representative office, the main sales in Russia come from wall-mounted gas heating boilers, where BAXI's share is about 21%. This company also has a good position in the segment of floor-standing devices with cast iron heat exchangers - here the company occupies a solid second place.
To do this, they are equipped with almost all modern technological innovations that allow optimizing fuel consumption:
- Programmable thermostat. Allows you to adjust heating parameters depending on the time of day and/or day of the week. Operation in the mode of maintaining the minimum required temperature in the absence of owners and switching to full power in the evening provides savings of up to 30% of gas consumption;
- Weather-compensated automation. A remote outside temperature sensor automatically reduces fuel consumption when the weather gets warmer;
- Room temperature sensor. Transmits data on the climate conditions in the room to the analytics system, which saves the history of heating and cooling and calculates the most efficient heating mode based on the dynamics of temperature changes;
- Fully modulating gas burners. Allows you to adjust the flame height depending on the heat demand;
- Smooth electronic ignition;
- Stable operation at reduced gas pressure. This is a very useful function in Russian reality.
The BAXI model range includes boilers of almost all modifications: double-circuit and single-circuit, floor-mounted and wall-mounted, with a closed and open combustion chamber. There are also varieties for outdoor use, with a remote control panel, and a built-in boiler.
Immergas
Immergas is one of the leaders in the market of heating devices for public and domestic premises. The company's headquarters have been located in the Italian city of Brescello since 1964. Immergaz boilers are represented in more than 32 countries around the world. The manufacturer is constantly improving its products and expanding its supply boundaries.
The manufacturer has a personal development and research center engaged in the design and manufacture of all types of heating structures. All products comply with the standards of each country where supplies are made.
Construction of the Immergas ZEUS Superior gas boiler
SeriesCharacteristics
| Immergas ZEUS Superior | Models in this series are mounted Italian boilers with a closed combustion chamber, having two circuits. The power of Immergas ZEUS Superior units is 24, 30, 34 kW. The average power factor of all boilers is 94%. The Immergas boiler operates at a minimum gas pressure of 3.5 mbar. The models do not require a voltage stabilizer, nor does it require observing polarity when connecting the unit to electricity. By replacing the injectors, it is possible to switch to liquefied gas. The kit includes a smoke removal pipe, a room thermostat, a special filter for hot water, a heating filter + pressure gauge + cleaning tap, and an anti-scale magnet. |
| Immergas NIKE Star | This is a wall-mounted gas heating boiler with a magnet for water preparation, a filter for hot water supply, a heating filter and a room thermostat. The series has two circuits, an open combustion chamber. Smoke is removed from the system forcibly. Combined heat exchanger, made of copper. The efficiency reaches 91.1%. It has an electronic board with a microprocessor, electric ignition and electronic flame modulation. The system has autodiagnostics. Can operate at very low gas pressure (3 mbar). It is possible to convert the boiler to liquefied gas. |
Gas boilers require regular maintenance.
Using gas to heat a room
Water heating of buildings involves the use of water heated to a certain temperature, which flows through pipes into radiators and gives off its heat to the air in the room. A variety of devices are used to heat the coolant - electric, gas and solid fuel boilers, heat pumps, furnaces with a water jacket, etc.
The Italian heating boilers mentioned in this article are highly economical and have good heating efficiency. So if you are looking for equipment for autonomous heating, then you can safely include these models in the list of acceptable options!
A modern gas coolant must have a cast iron body, considered in. In appearance, these devices are quite attractive and resemble an incomprehensible silver device from the future. I don’t even want to put this heat exchanger in a separate room, believe me, it is simply worthy of becoming a decoration for the main room of your cottage. What is good about Italian boilers from a technical point of view?
- Firstly, it is a heat exchanger divided into sections. Each section is cast with ribs, which allow the walls of the coolant to heat up faster and maintain the temperature in them longer.
- Secondly, the material for the working chambers of the boiler was ductile eutectic cast iron - an alloy characterized by high flexibility compared to ordinary cast iron. It does not crack or prick, so you can safely pour cold water over the heated coolant, nothing will happen to it.
- Thirdly, aerodynamics and hydrodynamics are taken into account 100 percent in the SLIM HP boiler. Both water and air are supplied through special channels without the formation of natural interference.
The casing of the device is separated from the working chambers by fiberglass insulation, which does not allow it to heat up and lose heat. You can calmly lean on your coolant or even hug it, this does not promise you any injuries. The burners of the Italian BAXI GROUP boilers are atmospheric, two-stage, but if you wish, the store can reinstall any burner that you like best. Heating systems, by the way, were prepared for Russian conditions, so they can also work with gas, the pressure of which is often low. This is a great achievement for European heating systems, because some of them begin to sneeze or go out altogether when the pressure in the gas network is below 8 bar. The design of this gas equipment has several patents in the European Union. It can also operate on liquefied gas from a gas holder if you do not have a centralized supply; in addition, the equipment monitors water overheating and lowers the temperature in the combustion chamber (note, it does not turn off, but rather lowers the temperature). In the combustion chamber itself, combustion control is possible, preventing gas from flowing after the fire has gone out, and the presence of draft is also periodically checked. If it is missing, the heating system extinguishes the flame. The developers paid a lot of attention to security, that's for sure.
The new Italian boiler is already being delivered to Russia, so if you are a lover of Italian shoes, cars and wine, I advise you to also pay attention to the boilers!
Ferroli
Ferroli gas boilers are purchased for public buildings and homes. The Ferroli Domicompact C24m model is one of the smallest in size (400*700*330 mm). It is equipped with a copper heat exchanger coated with aluminum and a stainless steel burner.
Italian boilers Ferroli
Italian Ferroli boilers are extremely safe to use, as they have various control systems:
- For example, a system that monitors blocking and, if something happens, turns on the pump every 24 hours of inactivity.
- Anti-freeze function. For the purpose of temperature control of water. The system starts working when the temperature drops to six degrees and stops working as soon as the temperature reaches sixteen plus degrees.
- Built-in self-diagnosis system.
SeriesCharacteristics
| FERROLI DIVA | The Ferroli boiler has a high efficiency of 93.1%, compact dimensions, light weight, elegant design and ease of wall mounting. The unit is equipped with a primary heat exchanger made of copper, which is coated with an aluminum anti-corrosion solution (increases service life!). The boiler's secondary heat exchanger, made of stainless steel, ensures rapid heating of the hot water supply. The combustion chamber is made of steel coated with anti-rust aluminum, separated inside by environmental material. Burners of the FERROLI DIVA series operate quietly and are made of stainless steel. The models are equipped with a security system and electric ignition without a pilot, and an atmospheric (open) combustion chamber. The circulation pump has three speeds. |
| FERROLI Domina FN | The series is represented by the models Domina F 13 N, Domina, F 16 NDomina, F 18 NDomina, F 24 N, Domina F 32 N (the number in the name means the heating power). Recommended heating area from 130 to 320 m². This is a wall-mounted gas boiler with an efficiency factor of 93%. It runs on natural gas, has an open stainless steel burner and an electronic ignition system. The combustion chamber of the FERROLI Domina FN series is sealed, has forced draft and microprocessor control. The electronic board, which is built into the design, can withstand electrical fluctuations of ±30%. The Ferroli boiler kit includes a circulation pump with three speeds, a condensate collector, an expansion tank, a three-way valve and a hydraulic group. The company is responsible for the safety and reliability of units in this series. |
Ferroli Domina FN boiler control panel
You can also pay attention to German, Japanese, Korean, Czech, Russian and Ukrainian gas boilers.
Kinds
Wall-mounted double-circuit boilers are the most popular type of heating products.
They are compact, fit well into the interior of any room, and have a full range of functions.
Italian engineers are leaders in the development and design of gas boilers, so the range includes all current types of units:
- Convection. The coolant is heated in the primary heat exchanger using heat from a gas burner.
- Condensation. A relatively new design that heats the coolant in a stepwise mode: first, thermal energy obtained from the condensation of water vapor from the exhaust smoke is used, and then follows conventional heating in the primary heat exchanger. Primary heating is relatively small, but it allows you to reduce the intensity of the main heating, which ensures gas savings and increases the service life of the heat exchanger by softening the operating mode. The efficiency of condensing boilers, declared by manufacturers, is about 107-109%, which cannot be from a physical point of view, but works great as a marketing ploy.
In addition, there are models with different types of combustion chamber:
- Open (atmospheric). They work on the principle of a conventional stove - smoke removal occurs through a common house chimney using natural draft, combustion air is taken directly from the room in which the boiler is installed.
- Closed (turbocharged). Air intake occurs from the outside, and smoke exhaust is provided by a turbofan.
PLEASE NOTE! Atmospheric boilers are a tribute to tradition, which in today's conditions looks like an atavism. Natural cravings are extremely unstable and depend on a host of external factors. Initially, atmospheric boilers were produced in a non-volatile version, but over time they began to install electronics, which made the design incapable of independent operation.
Lamborghini
The Lamborghini company produces single-circuit and double-circuit boilers with a closed and atmospheric (open) combustion chamber.
You can learn more about Lamborghini gas boilers in this article
Lamborghini boilers are compact in size and are adapted to low gas pressure. It is possible to connect a remote control and a programmable thermostat.
Gas boiler Lamborghini Taura
SeriesCharacteristics
| Lamborghini Taura | The dimensions of this series of boilers are reduced by an average of 18%, equipped with a safety valve, a recirculation function and a thermohydrometer. Small copper heat exchanger. Open burner made of stainless steel and with smooth power modulation. Electronic ignition system. The heating circuit tank is expanded by 8 liters (24 kW models) and 10 liters (32 kW models). Frost protection function. Can operate at low system temperatures. Efficiency - 93%. |
| Lamborghini Ninfa | The dimensions of the Lamborghini wall-mounted boiler of this series are 13% smaller than traditional boilers of this class. The units have a powerful hot water circuit heat exchanger, as well as a fast hot water production mode and a post-circulation function. Bright display that shows errors and blockages. If desired, you can connect a solar heating system. Small copper heat exchanger. The heating circuit tank is expanded by 8 liters (24 kW models) and 10 liters (32 kW models). Frost protection function. Open burner made of stainless steel and with smooth power modulation. Electronic ignition system. Can operate at low system temperatures. Efficiency - 93%. |
Reviews
Victor Annikov, 56 years old, Kasavyurt
The simplest gas boiler worked in my house for almost 20 years, and it served its purpose well. When the time came to change it, we immediately decided to install a dual-circuit model, since children and grandchildren often come to us on weekends. Due to the fact that we have very little space in our house, even though it is 100 square meters, we decided to install it in its old place - in the kitchen. As a result, we settled on the mounted Italtherm City Plus 24C model. I don’t remember how much it cost us, but since we bought it for the New Year, we got a special offer - they gave us a gas filter and a voltage relay as a gift. The device worked fully for one season, and there are no complaints about it. Even when we went on vacation for a week in winter (the boiler was turned off), after our return, the unit quickly managed to warm up the entire house - literally by the evening it was as warm as if we had never left.
Igor Valetnikov, 45 years old, Novy Urengoy
I installed a Domiproject double-circuit boiler for my parents 3 years ago. I didn’t really trust the domestic manufacturer, since I already had a negative experience, and with the same boilers. My parents are already old, so I chose a model that was as easy to use as possible. Domiproject has continuous flame modulation and frost protection. Since the unit was supposed to hang in the corridor, it was important for me that it have compact dimensions. The model has an electronic “filling”, the operation of which is displayed on the LCD display. Therefore, if any malfunction occurs, parents will easily understand it, and thanks to the decoding in the instructions, they themselves will determine the fault code. This device can even work with solar collectors. Maybe in the future I will improve their house in this sense.
Yulia Vereskova, 39 years old, Nazran
At our house, almost all the equipment is from Ariston, so when we were choosing a boiler for heating and hot water, it somehow happened naturally that we decided to go with the same manufacturer. Since we often have problems with gas pressure, the Ariston boiler is perfectly adapted to this. This year we also connected street sensors to it, thanks to which we no longer have to run to the boiler and regulate its operation. In addition, this also saves gas consumption somewhat, since in winter we do not constantly have frosts. At the time of purchase, the seller told us that several more boilers can be freely connected to this model, that is, if we upset the house, there will be no problems with heating.
Device
The design of Italian boilers is practically no different from the design of all the most popular models. Actually, most manufacturers try to copy the basic ideas and directions followed by Italian engineers.
The main elements of the boiler that provide the main functions are the primary and secondary heat exchangers, as well as the gas burner. The coolant, under the action of the circulation pump, is supplied to the primary heat exchanger and heated to the temperature determined by the set mode.
At the exit from the primary, it immediately enters the secondary heat exchanger, where it gives up a certain amount of thermal energy to prepare hot water, after which it finally enters the heating circuit.
In condensation models, the coolant is first supplied to the condensation chamber, which is the same heat exchanger. There it receives primary heating, after which it moves according to the standard pattern.
It must be taken into account that efficient operation of condensing boilers is only possible in low-temperature systems. If the return coolant flow is warmer than the condensate, then there is no point in such a design.
This limits the use of condensing boilers - the difference between the temperature inside and outside the room should not exceed 20°.
IMPORTANT! Condensing boilers are approximately twice as expensive as conventional convection models, therefore, when purchasing, you should first figure out whether such a design will be effective under the existing conditions.
Reasons for choosing Italian equipment
Although today a wide selection of heating equipment from different manufacturers is offered, Italian boilers occupy a leading position. The Italian double-circuit gas boiler is in particular demand. With its help, you can provide your living space with hot water and heating.
Products from Italy are distinguished not only by high quality, but also by ease of use. They are more expensive than domestic analogues, but the quality is much higher, more durable and reliable. Many Italian manufacturers offer their products, so there are many brands represented.
They all differ in their functions and advantages. It is impossible to answer unequivocally which manufacturer to give preference to when choosing equipment. The company's products are adapted to certain conditions with built-in functionality. Products from some brands are suitable for some conditions, but for others they are completely unsuitable.
Prices: summary comparison table
| Brand | Model | Type | Number of circuits | power, kWt | Cost, rub | Our rating (0-5 points) |
| BAXI | ECO4S 24 F | wall | 2 | 24 | 35 000 | 4,8 |
| LUNA 3 Comfort 1.240 i | wall | 1 | 24 | 42 000 | 4,8 | |
| SLIM 1.230 iN | floor | 1 | 22,1 | 56 000 | 4,9 | |
| Ferroli | Fortuna Pro F24 | wall | 2 | 24 | 28 000 | 4,5 |
| Pegasus D 23 | floor | 1 | 23 | 65 000 | 4,6 | |
| Ariston | CARES X 24 FF NG | wall | 2 | 25,8 | 32 500 | 4,8 |
| Lamborghini | FL D 24F | wall | 2 | 25,8 | 37 200 | 4,8 |
| Immergas | Eolo Star 24 3 | wall | 2 | 23,8 | 35 000 | 4,6 |
| Fondital | Victoria Compact CTFS 24 AF | wall | 2 | 23,7 | 42 000 | 4 |
| Sime | BRAVA ONE 25 BF | wall | 2 | 23,7 | 35 000 | 4,7 |
| RX 19 CE IONO | floor | 1 | 22 | 54 000 | 4,3 |
Ariston
Italian wall-mounted gas boilers Ariston provide comfort and coziness in the room, save energy and at the same time work with maximum efficiency.
Ariston boilers have a number of advantages:
- The units have a built-in “Automatic” function, which allows you to measure the air temperature outside the window and adjust the operation of the boiler with maximum efficiency.
- A stable supply of hot water is ensured by the “Comfort Plus” mode, thanks to which you can use water at the desired temperature within a few seconds.
- It has a function that allows you to analyze combustion products (“Chimney Sweep”).
- The “Purge” function allows you to remove air bubbles from the heating circuit.
- If desired, you can purchase temperature sensors without wires.
Automation for gas boilers: what it includes.
These Gas boilers from Italy are easy to install and easy to operate.
Connecting a single-circuit gas boiler Ariston
Ariston boilers have the following features:
- increased gap (150 mm) between the wall and fittings;
- access to electrical connections from outside the structure;
- protection against freezing of the hot water supply circuit, heating circuit, protection against scale formation is installed;
- drain valve in the heating circuit.
SeriesCharacteristics
| Ariston Clas Evo System FF | These are Italian wall-mounted gas heating boilers, represented by the names Clas Evo System 28 FF and Clas Evo System 32 FF. Equipped with a stainless steel burner, which has a protection function against periodic switching on. Recommended heating area 280 and 305 m². Has a copper heat exchanger and protective coating. The efficiency of the models is 94%. Combustion products are removed forcibly through an individual smoke removal system. They can operate at low temperatures down to -52°C, have automatic diagnostics and the ability to control the solar collector. Boilers of this series are reliability, quality and affordable price. |
| Ariston Genus Evo FF | This is an Italian double-circuit wall-mounted gas boiler. The design of the Ariston Genus Evo FF series involves a closed combustion chamber. The power of the models is determined by a stainless steel burner and is 24, 28 and 32.5 kW. The recommended heating area is 240, 280 and 325 m². Average efficiency 92%. The combustion chamber of the boiler is closed. Heating circuit pressure from 1 to 3 bar. Voltage 230 V. 35-82°C is the operating temperature of the heating circuit, and 36-60°C is the temperature of the hot water supply. The kit includes a pump with automatic speed control (two modes), an eight-liter tank, two mechanical cleaning filters (in the hot water supply circuit and the heating circuit). It is characterized as compact, fully adapted to Russian conditions, with silent working activity. |
| Ariston Alteas X | The Ariston double-circuit gas boiler (Italy) of this series is represented by the names Alteas X 24 FF NG, Alteas X 30 FF NG, Alteas X 35 FF NG. The power of the models is 24, 28 and 32.5, respectively. Heating area 240, 280 and 325 m². The efficiency is 93%. Chimney diameter 60/100 mm. The volume of the expansion tank is 8 liters. It runs on natural gas, has a closed combustion chamber, and is wall mounted. Separate heat exchanger made of copper. Heating circuit pressure in the range of 0.6-3 bar. Voltage 230 V. The unit can switch to operating on liquefied gas. Control can be carried out via a Wi-Fi module built into the system. |
Control panel of the gas boiler Ariston Alteas X
Baxi
The manufacturer Baxi produces condensing gas boilers and traditional ones. There is a choice of floor and wall units. The Baksi boiler is compact and visually attractive. It easily switches to liquefied gas.
Gas boilers BAXI
The Baxi boiler has a number of advantageous functions.
- The boiler power can be changed due to the special option of constant electronic flame modulation. It is regulated based on the temperature of the coolant and room air specified by the user. In hot water mode, everything depends on the volume of water required and the temperature.
- The boiler produces the last few degrees and operates at low power. This reduces the number of starts.
- Noise during operation is reduced due to the heating mode, where the gradual start function operates. This function brings the system to the desired mode in 35-45 seconds.
- The Baxi boiler has a built-in anti-blocking function to protect the three-way valve and pump. The circulation pump operates after the unit stops operating. If the design is with a thermostat, then the duration is three seconds; if without it, then the operation is continuous.
- The unit’s automation is configured in such a way that it itself adjusts the operation of the structure in connection with the temperature outside the window.
- Built-in programming function. Makes it possible to configure the program for On/Off mode and reduced coolant temperature in the heating circuit. You can set the Auto Shut-off program in the hot water supply circuit.
- The unit has two modes: radiator high-temperature, panel low-temperature.
- Function to protect water from bacteria. The work is carried out in conjunction with a storage boiler. The water heats up to seventy degrees and harmful microorganisms in the storage tank disappear.
| Series | Characteristic |
| Baxi SLIM 1 iN | The Baxi SLIM 1 iN series is represented by the names 230 iN, 300 iN, 400 iN, 490 iN, 620 iN. Power varies from 22 to 62 kW, and efficiency averages 90%. Suitable for heating areas from 220 to 620 m². Power consumption per hour is 0.02 kW/h. These are single-circuit units with floor mounting and an open combustion chamber. A mains voltage of 230 V and a heating circuit pressure of 0.5 to 3 bar are required. They are not equipped with a pump and expansion tank. Made specifically for heating. Combustion products are removed naturally. They have a stainless steel burner and electronic flame modulation, a cast iron heat exchanger and the ability to be converted to operate on liquefied gas. |
| Baxi ECO-4S F | The series is represented by models ECO-4S 10 F, ECO-4S 18 F and ECO-4S 24 F. This is a wall-mounted gas boiler (Italy), double-circuit, with powers of 10, 18 and 24 kW. Suitable for heating areas of 100, 180 and 240 m². All have a capacity of 13.7 l/min, an average efficiency of 92.9%, a power consumption of 0.13 kW/h and a chimney diameter of 60/100 mm. The separate heat exchanger of these models is made of copper. The combustion chamber is closed. The mains voltage is 230 V. The operating temperature range of the heating circuit is 30-85°C, the operating temperature range of the hot water supply circuit is 35-60°C. Heating circuit pressure from 1 to 3 bar. Construction of the gas boiler Baxi ECO-4S F |
| Baxi LUNA Duo-tec HT 1 GA | The Baxi LUNA Duo-tec HT 1 GA series is presented in models with heating power of 12, 24 and 28 kW. Units with an area of 120, 240 and 280 m² are heated, respectively. The average efficiency is 107.6%. Single-circuit, wall-mounted, with a closed combustion chamber. Heat exchanger material – steel. The burner is modeled, made of stainless steel. Operating temperature of the heating circuit is from 25 to 80°C. Heating circuit pressure from 0.5 to 3 bar. Voltage – 230 V. |
Calculation of the amount of gas consumed by the boiler.
Rating of TOP wall-mounted Italian double-circuit boilers
Let's look at the most popular and sought-after models of Italian wall-mounted double-circuit boilers:
Baxi
An Italian company that has been producing gas boilers for about 50 years. The range of wall-mounted boilers is very wide and varied; there are convection and condensation models of varying power levels.
The company pursues a policy of producing simple, economical, but high-quality boilers with full functionality.
Modern developments and technologies make it possible to create high-quality and reliable units that are in high demand.
Model lines:
- MAIN.
- NUVOLA.
- ECO.
- LUNA.
Users note the attractive appearance, reliability and stable operation of Baxi boilers.
Ariston
The Ariston brand belongs to the Indesit Company, founded (under a different name) in the 30s of the 20th century.
Today the company occupies a high position among competitors, supplying high-tech and reliable equipment to the world market, including wall-mounted double-circuit gas boilers.
Series:
- Egis.
- Clas
- Genus.
All models are high-tech examples of wall-mounted boilers, equipped with a wide range of functions. Some can be programmed for a week, controlled either from an external panel or from a remote control.
Immergas
The company dates the beginning of its activities to 1964. The energetic and active development of production has yielded results.
Today, several series of wall-mounted double-circuit boilers are offered to customers:
- Star.
- Mythos.
- Mini.
- Major.
- Avo/Zeus.
The boilers use a bithermic heat exchanger, which allows obtaining a larger volume of hot water than a conventional separate plate type.
There are models with atmospheric and turbocharged burners, of different capacities, equipped with additional functionality.
Tiberis
The company is a newcomer among the old-timers in the heating industry. However, this does not prevent it from actively developing and producing popular and competitive gas boilers.
Boiler series:
- Tiberis Mini.
- Tiberis Cube.
Relatively inexpensive, but very high quality and reliable wall-mounted boilers. Advanced methods and technologies were used in production, which made it possible to eliminate some weak points in the design and obtain impressive results.
Ferroli
A company that began its path to success in 1958 as a modest workshop. Today it is a world-famous company that produces a wide range of wall-mounted gas boilers.
Series offered:
- DIVATECH.
- BLUEHELIX.
- FORTUNA.
- DIVAPROJECT.
- DIVABEL.
The boilers are designed for operation in difficult conditions, on hard water, with interruptions in power supply and gas supply. They are able to provide the house with heat and hot water and maintain stable operating conditions.
Users note the ease of control and aesthetic appearance.
Fondital
The company was founded in Italy in 1970.
Gas boilers are produced in the following series:
- MINORCA.
- ANTEA.
- FORMENTERA.
- ITACA.
- VICTORIA COMPACT.
Models have great capabilities. There are different types of heat exchangers - both the usual separate version and the more modern bithermal (combined) one.
